[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1294133056-21195-5-git-send-email-shawn.guo@freescale.com>
Date: Tue, 4 Jan 2011 17:24:10 +0800
From: Shawn Guo <shawn.guo@...escale.com>
To: <davem@...emloft.net>, <gerg@...pgear.com>, <baruch@...s.co.il>,
<eric@...rea.com>, <bryan.wu@...onical.com>,
<r64343@...escale.com>, <B32542@...escale.com>,
<u.kleine-koenig@...gutronix.de>, <lw@...o-electronics.de>,
<w.sang@...gutronix.de>, <s.hauer@...gutronix.de>,
<netdev@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<shawn.guo@...escale.com>
Subject: [PATCH v2 04/10] net/fec: improve pm for better suspend/resume
The following commit made a fix to use fec_enet_open/fec_enet_close
over fec_enet_init/fec_stop for suspend/resume, because fec_enet_init
does not allow to have a working network interface at resume.
e3fe8558c7fc182972c3d947d88744482111f304
net/fec: fix pm to survive to suspend/resume
This fix works for i.mx/mxc fec controller, but fails on mx28 fec
which gets a different interrupt logic design. On i.mx fec, interrupt
can be triggered even bit ETHER_EN of ECR register is not set. But
on mx28 fec, ETHER_EN must be set to get interrupt work. Meanwhile,
MII interrupt is mandatory to resume the driver, because MDIO
read/write changed to interrupt mode by commit below.
97b72e4320a9aaa4a7f1592ee7d2da7e2c9bd349
fec: use interrupt for MDIO completion indication
fec_restart/fec_stop comes out as the solution working for both
cases.
Signed-off-by: Shawn Guo <shawn.guo@...escale.com>
---
drivers/net/fec.c | 12 ++++++++----
1 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index cd59814..f147508 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1387,8 +1387,10 @@ fec_suspend(struct device *dev)
if (ndev) {
fep = netdev_priv(ndev);
- if (netif_running(ndev))
- fec_enet_close(ndev);
+ if (netif_running(ndev)) {
+ fec_stop(ndev);
+ netif_device_detach(ndev);
+ }
clk_disable(fep->clk);
}
return 0;
@@ -1403,8 +1405,10 @@ fec_resume(struct device *dev)
if (ndev) {
fep = netdev_priv(ndev);
clk_enable(fep->clk);
- if (netif_running(ndev))
- fec_enet_open(ndev);
+ if (netif_running(ndev)) {
+ fec_restart(ndev, fep->full_duplex);
+ netif_device_attach(ndev);
+ }
}
return 0;
}
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists