| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110110192216.GA23741@mcarlson.broadcom.com> Date: Mon, 10 Jan 2011 11:22:16 -0800 From: "Matt Carlson" <mcarlson@...adcom.com> To: "Stephen Clark" <sclark46@...thlink.net> cc: "Linux Kernel Network Developers" <netdev@...r.kernel.org>, "Michael Chan" <mchan@...adcom.com>, "Matthew Carlson" <mcarlson@...adcom.com> Subject: Re: panic in tg3 driver On Sun, Jan 09, 2011 at 02:30:50PM -0800, Stephen Clark wrote: > On 01/04/2011 09:54 AM, Stephen Clark wrote: > > Hello, > > > > > > The hardware is an Acrosser AR-M0898B micro box. > > lspci > > 00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro > > Host Bridge > > 00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro > > Host Bridge > > 00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro > > Host Bridge > > 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge > > 00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro > > Host Bridge > > 00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro > > Host Bridge > > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge > > 00:0f.0 IDE interface: VIA Technologies, Inc. VT8251 Serial ATA > > Controller (rev > > 20) > > 00:0f.1 IDE interface: VIA Technologies, Inc. > > VT82C586A/B/VT82C686/A/B/VT823x/A/ > > C PIPC Bus Master IDE (rev 07) > > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > > Controller > > (rev 91) > > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > > Controller > > (rev 91) > > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > > Controller > > (rev 91) > > 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > > Controller > > (rev 91) > > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90) > > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge > > 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller > > 00:13.0 Host bridge: VIA Technologies, Inc. VT8251 Host Bridge > > 00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge > > 02:08.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T > > (rev 02) > > 02:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T > > (rev 02) > > 80:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port > > 80:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port > > 81:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M > > Fast Ethernet > > PCI Express (rev 02) > > 82:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M > > Fast Ethernet > > PCI Express (rev 02) > > > > Kernel 2.6.36-2.el5.elrepo on an i686 > > > > When I try to ifconfig either of the BCM5906M ports the system panics. > > > > Ideas, fixes ? > > > > [root@...10 ~]# modprobe tg3 > > [root@...10 ~]# ifconfig eth2 2.2.2.2/24 > > ------------[ cut here ]------------ > > kernel BUG at drivers/net/tg3.c:4365! > > invalid opcode: 0000 [#1] PREEMPT SMP > > last sysfs file: /sys/class/net/eth3/address > > Modules linked in: tg3 xt_tcpudp ipt_LOG xt_limit xt_state > > iptable_mangle af_ke] > > > > Pid: 20303, comm: kworker/0:2 Not tainted 2.6.36-2.el5.elrepo #1 > > CN700-8251/ > > EIP: 0060:[<e1c62f19>] EFLAGS: 00010202 CPU: 0 > > EIP is at tg3_tx_recover+0x1e/0x53 [tg3] > > EAX: deece4c0 EBX: dfa9c000 ECX: deece4c0 EDX: ffffffff > > ESI: deece4c0 EDI: deece500 EBP: c1801f38 ESP: c1801f30 > > DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > > Process kworker/0:2 (pid: 20303, ti=c1801000 task=df0105d0 > > task.ti=dee62000) > > Stack: > > dfa9c000 00000000 c1801f6c e1c630be c1801f6c deece4c0 00000840 00000000 > > <0> df251cc0 00000005 00000000 df979800 deece500 deece4c0 00000040 > > c1801f94 > > <0> e1c661e5 00000000 00000040 c1801f88 e09df1d2 00000000 deece500 > > dfab4000 > > Call Trace: > > [<e1c630be>] ? tg3_tx+0x157/0x1a2 [tg3] > > [<e1c661e5>] ? tg3_poll_work+0x2b/0x10b [tg3] > > [<e09df1d2>] ? ssb_write32+0x11/0x14 [b44] > > [<e1c662f9>] ? tg3_poll+0x34/0x9a [tg3] > > [<c0674058>] ? net_rx_action+0x7e/0x11c > > [<c04409c9>] ? __do_softirq+0x85/0x10c > > [<c0440944>] ? __do_softirq+0x0/0x10c > > <IRQ> > > [<c04404ef>] ? _local_bh_enable_ip+0x68/0x87 > > [<c044051b>] ? local_bh_enable_ip+0xd/0xf > > [<c046593b>] ? __raw_spin_unlock_bh+0x1c/0x1e > > [<c06fa4f2>] ? _raw_spin_unlock_bh+0xd/0xf > > [<e1c6281f>] ? spin_unlock_bh+0xd/0xf [tg3] > > [<e1c62cbe>] ? tg3_full_unlock+0x10/0x12 [tg3] > > [<e1c664c7>] ? tg3_reset_task+0xd7/0xe3 [tg3] > > [<c044ec37>] ? process_one_work+0x10b/0x1bc > > [<e1c663f0>] ? tg3_reset_task+0x0/0xe3 [tg3] > > [<c044fd41>] ? worker_thread+0x77/0xf9 > > [<c0453048>] ? kthread+0x60/0x65 > > [<c044fcca>] ? worker_thread+0x0/0xf9 > > [<c0452fe8>] ? kthread+0x0/0x65 > > [<c040337e>] ? kernel_thread_helper+0x6/0x10 > > Code: f0 e8 88 ff ff ff 8d 65 f8 5b 5e 5d c3 55 89 e5 56 53 0f 1f 44 > > 00 00 f6 8 > > EIP: [<e1c62f19>] tg3_tx_recover+0x1e/0x53 [tg3] SS:ESP 0068:c1801f30 > > ---[ end trace 82381e9b93e397ad ]--- > > Kernel panic - not syncing: Fatal exception in interrupt > > Pid: 20303, comm: kworker/0:2 Tainted: G D > > 2.6.36-2.el5.elrepo #1 > > Call Trace: > > [<c043b3cd>] panic+0x62/0x15d > > [<c06fb7d1>] oops_end+0x99/0xa8 > > [<e1c62f19>] ? tg3_tx_recover+0x1e/0x53 [tg3] > > [<c0405a62>] die+0x58/0x5e > > > > Thanks, > > Steve > > > Additonal info I compiled the latest kernel 2.6.37-rc8+ and still have the problem. > Also boot with noapic I see this in the dmesg log and interrupts are increasing > like crazy: > tg3.c:v3.115 (October 14, 2010) > tg3 0000:81:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 > tg3 0000:81:00.0: setting latency timer to 64 > tg3 0000:81:00.0: PCI: Disallowing DAC for device > tg3 0000:81:00.0: eth2: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC add > ress 00:02:b6:36:d1:39 > tg3 0000:81:00.0: eth2: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed > [0]) > tg3 0000:81:00.0: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] > tg3 0000:81:00.0: eth2: dma_rwctrl[76180000] dma_mask[32-bit] > tg3 0000:82:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 > tg3 0000:82:00.0: setting latency timer to 64 > tg3 0000:82:00.0: PCI: Disallowing DAC for device > tg3 0000:82:00.0: eth3: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC add > ress 00:02:b6:36:d1:3a > tg3 0000:82:00.0: eth3: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed > [0]) > tg3 0000:82:00.0: eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] > tg3 0000:82:00.0: eth3: dma_rwctrl[76180000] dma_mask[32-bit] > tg3 0000:81:00.0: irq 40 for MSI/MSI-X > tg3 0000:81:00.0: eth2: No interrupt was generated using MSI. Switching to INTx > mode. Please report this failure to the PCI maintainer and include system chipse > t information > ADDRCONF(NETDEV_UP): eth2: link is not ready > [root@...10 ~]# cat /proc/interrupts > CPU0 > 0: 162 XT-PIC-XT-PIC timer > 1: 2 XT-PIC-XT-PIC i8042 > 2: 0 XT-PIC-XT-PIC cascade > 3: 1 XT-PIC-XT-PIC > 4: 4863 XT-PIC-XT-PIC serial > 6: 2 XT-PIC-XT-PIC floppy > 7: 5 XT-PIC-XT-PIC ehci_hcd:usb1, uhci_hcd:usb3 > 8: 0 XT-PIC-XT-PIC rtc0 > 9: 0 XT-PIC-XT-PIC acpi > 10: 2334234 XT-PIC-XT-PIC uhci_hcd:usb2, eth0, eth2 > > [root@...10 ~]# cat /proc/interrupts |grep eth2 > 10: 18388914 XT-PIC-XT-PIC uhci_hcd:usb2, eth0, eth2 > [root@...10 ~]# cat /proc/interrupts |grep eth2 > 10: 18901627 XT-PIC-XT-PIC uhci_hcd:usb2, eth0, eth2 > > -- > > "They that give up essential liberty to obtain temporary safety, > deserve neither liberty nor safety." (Ben Franklin) > > "The course of history shows that as a government grows, liberty > decreases." (Thomas Jefferson) I think drivers/net/tg3.c:4365 is at the line that reads "spin_lock(&tp->lock);" in tg3_tx_recover. Can you verify? -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists