[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1295005350-28124-4-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Fri, 14 Jan 2011 03:42:30 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Bruce Allan <bruce.w.allan@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, bphilips@...ell.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-2.6 3/3] e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs
From: Bruce Allan <bruce.w.allan@...el.com>
Some minor comment errors and whitespace issues discovered while looking
into this are also addressed.
Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/e1000e/82571.c | 2 +-
drivers/net/e1000e/hw.h | 2 +-
drivers/net/e1000e/lib.c | 18 ++--
drivers/net/e1000e/netdev.c | 221 ++++++++++++++++++++++---------------------
drivers/net/e1000e/param.c | 4 +-
drivers/net/e1000e/phy.c | 2 +-
6 files changed, 126 insertions(+), 123 deletions(-)
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 003a717..7bdec0b 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1310,7 +1310,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
* apply workaround for hardware errata documented in errata
* docs Fixes issue where some error prone or unreliable PCIe
* completions are occurring, particularly with ASPM enabled.
- * Without fix, issue can cause tx timeouts.
+ * Without fix, issue can cause Tx timeouts.
*/
reg = er32(GCR2);
reg |= 1;
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index efdbb28..bc0860a 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -102,7 +102,7 @@ enum e1e_registers {
E1000_RDTR = 0x02820, /* Rx Delay Timer - RW */
E1000_RXDCTL_BASE = 0x02828, /* Rx Descriptor Control - RW */
#define E1000_RXDCTL(_n) (E1000_RXDCTL_BASE + (_n << 8))
- E1000_RADV = 0x0282C, /* RX Interrupt Absolute Delay Timer - RW */
+ E1000_RADV = 0x0282C, /* Rx Interrupt Absolute Delay Timer - RW */
/* Convenience macros
*
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 1c98dfa..68aa174 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -533,7 +533,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
mac->autoneg_failed = 1;
return 0;
}
- e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
+ e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
/* Disable auto-negotiation in the TXCW register */
ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
@@ -556,7 +556,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
* and disable forced link in the Device Control register
* in an attempt to auto-negotiate with our link partner.
*/
- e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
+ e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
ew32(TXCW, mac->txcw);
ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
@@ -598,7 +598,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
mac->autoneg_failed = 1;
return 0;
}
- e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
+ e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
/* Disable auto-negotiation in the TXCW register */
ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
@@ -621,7 +621,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
* and disable forced link in the Device Control register
* in an attempt to auto-negotiate with our link partner.
*/
- e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
+ e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
ew32(TXCW, mac->txcw);
ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
@@ -800,9 +800,9 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
* The possible values of the "fc" parameter are:
* 0: Flow control is completely disabled
* 1: Rx flow control is enabled (we can receive pause frames,
- * but not send pause frames).
+ * but not send pause frames).
* 2: Tx flow control is enabled (we can send pause frames but we
- * do not support receiving pause frames).
+ * do not support receiving pause frames).
* 3: Both Rx and Tx flow control (symmetric) are enabled.
*/
switch (hw->fc.current_mode) {
@@ -1031,9 +1031,9 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw)
* The possible values of the "fc" parameter are:
* 0: Flow control is completely disabled
* 1: Rx flow control is enabled (we can receive pause
- * frames but not send pause frames).
+ * frames but not send pause frames).
* 2: Tx flow control is enabled (we can send pause frames
- * frames but we do not receive pause frames).
+ * frames but we do not receive pause frames).
* 3: Both Rx and Tx flow control (symmetric) is enabled.
* other: No other values should be possible at this point.
*/
@@ -1189,7 +1189,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
} else {
hw->fc.current_mode = e1000_fc_rx_pause;
e_dbg("Flow Control = "
- "RX PAUSE frames only.\r\n");
+ "Rx PAUSE frames only.\r\n");
}
}
/*
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 04df745..1c18f26 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -77,17 +77,17 @@ struct e1000_reg_info {
char *name;
};
-#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */
-#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */
-#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */
-#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */
-#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */
-
-#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */
-#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */
-#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */
-#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */
-#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */
+#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */
+#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */
+#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */
+#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */
+#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */
+
+#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */
+#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */
+#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */
static const struct e1000_reg_info e1000_reg_info_tbl[] = {
@@ -99,7 +99,7 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = {
/* Interrupt Registers */
{E1000_ICR, "ICR"},
- /* RX Registers */
+ /* Rx Registers */
{E1000_RCTL, "RCTL"},
{E1000_RDLEN, "RDLEN"},
{E1000_RDH, "RDH"},
@@ -115,7 +115,7 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = {
{E1000_RDFTS, "RDFTS"},
{E1000_RDFPC, "RDFPC"},
- /* TX Registers */
+ /* Tx Registers */
{E1000_TCTL, "TCTL"},
{E1000_TDBAL, "TDBAL"},
{E1000_TDBAH, "TDBAH"},
@@ -160,7 +160,7 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
break;
default:
printk(KERN_INFO "%-15s %08x\n",
- reginfo->name, __er32(hw, reginfo->ofs));
+ reginfo->name, __er32(hw, reginfo->ofs));
return;
}
@@ -171,9 +171,8 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
printk(KERN_CONT "\n");
}
-
/*
- * e1000e_dump - Print registers, tx-ring and rx-ring
+ * e1000e_dump - Print registers, Tx-ring and Rx-ring
*/
static void e1000e_dump(struct e1000_adapter *adapter)
{
@@ -182,12 +181,20 @@ static void e1000e_dump(struct e1000_adapter *adapter)
struct e1000_reg_info *reginfo;
struct e1000_ring *tx_ring = adapter->tx_ring;
struct e1000_tx_desc *tx_desc;
- struct my_u0 { u64 a; u64 b; } *u0;
+ struct my_u0 {
+ u64 a;
+ u64 b;
+ } *u0;
struct e1000_buffer *buffer_info;
struct e1000_ring *rx_ring = adapter->rx_ring;
union e1000_rx_desc_packet_split *rx_desc_ps;
struct e1000_rx_desc *rx_desc;
- struct my_u1 { u64 a; u64 b; u64 c; u64 d; } *u1;
+ struct my_u1 {
+ u64 a;
+ u64 b;
+ u64 c;
+ u64 d;
+ } *u1;
u32 staterr;
int i = 0;
@@ -198,12 +205,10 @@ static void e1000e_dump(struct e1000_adapter *adapter)
if (netdev) {
dev_info(&adapter->pdev->dev, "Net device Info\n");
printk(KERN_INFO "Device Name state "
- "trans_start last_rx\n");
+ "trans_start last_rx\n");
printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
- netdev->name,
- netdev->state,
- netdev->trans_start,
- netdev->last_rx);
+ netdev->name, netdev->state, netdev->trans_start,
+ netdev->last_rx);
}
/* Print Registers */
@@ -214,26 +219,26 @@ static void e1000e_dump(struct e1000_adapter *adapter)
e1000_regdump(hw, reginfo);
}
- /* Print TX Ring Summary */
+ /* Print Tx Ring Summary */
if (!netdev || !netif_running(netdev))
goto exit;
- dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
+ dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
- " leng ntw timestamp\n");
+ " leng ntw timestamp\n");
buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
- 0, tx_ring->next_to_use, tx_ring->next_to_clean,
- (unsigned long long)buffer_info->dma,
- buffer_info->length,
- buffer_info->next_to_watch,
- (unsigned long long)buffer_info->time_stamp);
+ 0, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (unsigned long long)buffer_info->dma,
+ buffer_info->length,
+ buffer_info->next_to_watch,
+ (unsigned long long)buffer_info->time_stamp);
- /* Print TX Rings */
+ /* Print Tx Ring */
if (!netif_msg_tx_done(adapter))
goto rx_ring_summary;
- dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
+ dev_info(&adapter->pdev->dev, "Tx Ring Dump\n");
/* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
*
@@ -263,22 +268,22 @@ static void e1000e_dump(struct e1000_adapter *adapter)
* 63 48 47 40 39 36 35 32 31 24 23 20 19 0
*/
printk(KERN_INFO "Tl[desc] [address 63:0 ] [SpeCssSCmCsLen]"
- " [bi->dma ] leng ntw timestamp bi->skb "
- "<-- Legacy format\n");
+ " [bi->dma ] leng ntw timestamp bi->skb "
+ "<-- Legacy format\n");
printk(KERN_INFO "Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen]"
- " [bi->dma ] leng ntw timestamp bi->skb "
- "<-- Ext Context format\n");
+ " [bi->dma ] leng ntw timestamp bi->skb "
+ "<-- Ext Context format\n");
printk(KERN_INFO "Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen]"
- " [bi->dma ] leng ntw timestamp bi->skb "
- "<-- Ext Data format\n");
+ " [bi->dma ] leng ntw timestamp bi->skb "
+ "<-- Ext Data format\n");
for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
u0 = (struct my_u0 *)tx_desc;
printk(KERN_INFO "T%c[0x%03X] %016llX %016llX %016llX "
- "%04X %3X %016llX %p",
- (!(le64_to_cpu(u0->b) & (1<<29)) ? 'l' :
- ((le64_to_cpu(u0->b) & (1<<20)) ? 'd' : 'c')), i,
+ "%04X %3X %016llX %p",
+ (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
+ ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i,
(unsigned long long)le64_to_cpu(u0->a),
(unsigned long long)le64_to_cpu(u0->b),
(unsigned long long)buffer_info->dma,
@@ -296,22 +301,22 @@ static void e1000e_dump(struct e1000_adapter *adapter)
if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
- 16, 1, phys_to_virt(buffer_info->dma),
- buffer_info->length, true);
+ 16, 1, phys_to_virt(buffer_info->dma),
+ buffer_info->length, true);
}
- /* Print RX Rings Summary */
+ /* Print Rx Ring Summary */
rx_ring_summary:
- dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
+ dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
printk(KERN_INFO "Queue [NTU] [NTC]\n");
printk(KERN_INFO " %5d %5X %5X\n", 0,
- rx_ring->next_to_use, rx_ring->next_to_clean);
+ rx_ring->next_to_use, rx_ring->next_to_clean);
- /* Print RX Rings */
+ /* Print Rx Ring */
if (!netif_msg_rx_status(adapter))
goto exit;
- dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
+ dev_info(&adapter->pdev->dev, "Rx Ring Dump\n");
switch (adapter->rx_ps_pages) {
case 1:
case 2:
@@ -329,7 +334,7 @@ rx_ring_summary:
* +-----------------------------------------------------+
*/
printk(KERN_INFO "R [desc] [buffer 0 63:0 ] "
- "[buffer 1 63:0 ] "
+ "[buffer 1 63:0 ] "
"[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] "
"[bi->skb] <-- Ext Pkt Split format\n");
/* [Extended] Receive Descriptor (Write-Back) Format
@@ -344,7 +349,7 @@ rx_ring_summary:
* 63 48 47 32 31 20 19 0
*/
printk(KERN_INFO "RWB[desc] [ck ipid mrqhsh] "
- "[vl l0 ee es] "
+ "[vl l0 ee es] "
"[ l3 l2 l1 hs] [reserved ] ---------------- "
"[bi->skb] <-- Ext Rx Write-Back format\n");
for (i = 0; i < rx_ring->count; i++) {
@@ -352,26 +357,26 @@ rx_ring_summary:
rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
u1 = (struct my_u1 *)rx_desc_ps;
staterr =
- le32_to_cpu(rx_desc_ps->wb.middle.status_error);
+ le32_to_cpu(rx_desc_ps->wb.middle.status_error);
if (staterr & E1000_RXD_STAT_DD) {
/* Descriptor Done */
printk(KERN_INFO "RWB[0x%03X] %016llX "
- "%016llX %016llX %016llX "
- "---------------- %p", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- (unsigned long long)le64_to_cpu(u1->c),
- (unsigned long long)le64_to_cpu(u1->d),
- buffer_info->skb);
+ "%016llX %016llX %016llX "
+ "---------------- %p", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ (unsigned long long)le64_to_cpu(u1->c),
+ (unsigned long long)le64_to_cpu(u1->d),
+ buffer_info->skb);
} else {
printk(KERN_INFO "R [0x%03X] %016llX "
- "%016llX %016llX %016llX %016llX %p", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- (unsigned long long)le64_to_cpu(u1->c),
- (unsigned long long)le64_to_cpu(u1->d),
- (unsigned long long)buffer_info->dma,
- buffer_info->skb);
+ "%016llX %016llX %016llX %016llX %p", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ (unsigned long long)le64_to_cpu(u1->c),
+ (unsigned long long)le64_to_cpu(u1->d),
+ (unsigned long long)buffer_info->dma,
+ buffer_info->skb);
if (netif_msg_pktdata(adapter))
print_hex_dump(KERN_INFO, "",
@@ -400,18 +405,18 @@ rx_ring_summary:
* 63 48 47 40 39 32 31 16 15 0
*/
printk(KERN_INFO "Rl[desc] [address 63:0 ] "
- "[vl er S cks ln] [bi->dma ] [bi->skb] "
- "<-- Legacy format\n");
+ "[vl er S cks ln] [bi->dma ] [bi->skb] "
+ "<-- Legacy format\n");
for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) {
rx_desc = E1000_RX_DESC(*rx_ring, i);
buffer_info = &rx_ring->buffer_info[i];
u0 = (struct my_u0 *)rx_desc;
printk(KERN_INFO "Rl[0x%03X] %016llX %016llX "
- "%016llX %p", i,
- (unsigned long long)le64_to_cpu(u0->a),
- (unsigned long long)le64_to_cpu(u0->b),
- (unsigned long long)buffer_info->dma,
- buffer_info->skb);
+ "%016llX %p", i,
+ (unsigned long long)le64_to_cpu(u0->a),
+ (unsigned long long)le64_to_cpu(u0->b),
+ (unsigned long long)buffer_info->dma,
+ buffer_info->skb);
if (i == rx_ring->next_to_use)
printk(KERN_CONT " NTU\n");
else if (i == rx_ring->next_to_clean)
@@ -421,9 +426,10 @@ rx_ring_summary:
if (netif_msg_pktdata(adapter))
print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS,
- 16, 1, phys_to_virt(buffer_info->dma),
- adapter->rx_buffer_len, true);
+ DUMP_PREFIX_ADDRESS,
+ 16, 1,
+ phys_to_virt(buffer_info->dma),
+ adapter->rx_buffer_len, true);
}
}
@@ -450,8 +456,7 @@ static int e1000_desc_unused(struct e1000_ring *ring)
* @skb: pointer to sk_buff to be indicated to stack
**/
static void e1000_receive_skb(struct e1000_adapter *adapter,
- struct net_device *netdev,
- struct sk_buff *skb,
+ struct net_device *netdev, struct sk_buff *skb,
u8 status, __le16 vlan)
{
skb->protocol = eth_type_trans(skb, netdev);
@@ -464,7 +469,7 @@ static void e1000_receive_skb(struct e1000_adapter *adapter,
}
/**
- * e1000_rx_checksum - Receive Checksum Offload for 82543
+ * e1000_rx_checksum - Receive Checksum Offload
* @adapter: board private structure
* @status_err: receive descriptor status and error fields
* @csum: receive descriptor csum field
@@ -548,7 +553,7 @@ map_skb:
adapter->rx_buffer_len,
DMA_FROM_DEVICE);
if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
- dev_err(&pdev->dev, "RX DMA map failed\n");
+ dev_err(&pdev->dev, "Rx DMA map failed\n");
adapter->rx_dma_failed++;
break;
}
@@ -601,7 +606,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
ps_page = &buffer_info->ps_pages[j];
if (j >= adapter->rx_ps_pages) {
/* all unused desc entries get hw null ptr */
- rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
+ rx_desc->read.buffer_addr[j + 1] =
+ ~cpu_to_le64(0);
continue;
}
if (!ps_page->page) {
@@ -617,7 +623,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
if (dma_mapping_error(&pdev->dev,
ps_page->dma)) {
dev_err(&adapter->pdev->dev,
- "RX DMA page map failed\n");
+ "Rx DMA page map failed\n");
adapter->rx_dma_failed++;
goto no_buffers;
}
@@ -627,8 +633,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
* didn't change because each write-back
* erases this info.
*/
- rx_desc->read.buffer_addr[j+1] =
- cpu_to_le64(ps_page->dma);
+ rx_desc->read.buffer_addr[j + 1] =
+ cpu_to_le64(ps_page->dma);
}
skb = netdev_alloc_skb_ip_align(netdev,
@@ -644,7 +650,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
adapter->rx_ps_bsize0,
DMA_FROM_DEVICE);
if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
- dev_err(&pdev->dev, "RX DMA map failed\n");
+ dev_err(&pdev->dev, "Rx DMA map failed\n");
adapter->rx_dma_failed++;
/* cleanup skb */
dev_kfree_skb_any(skb);
@@ -662,7 +668,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
* such as IA-64).
*/
wmb();
- writel(i<<1, adapter->hw.hw_addr + rx_ring->tail);
+ writel(i << 1, adapter->hw.hw_addr + rx_ring->tail);
}
i++;
@@ -1106,11 +1112,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
cleaned = 1;
cleaned_count++;
dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_ps_bsize0,
- DMA_FROM_DEVICE);
+ adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
buffer_info->dma = 0;
- /* see !EOP comment in other rx routine */
+ /* see !EOP comment in other Rx routine */
if (!(staterr & E1000_RXD_STAT_EOP))
adapter->flags2 |= FLAG2_IS_DISCARDING;
@@ -2610,7 +2615,7 @@ static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
}
/**
- * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
+ * e1000_configure_tx - Configure Transmit Unit after Reset
* @adapter: board private structure
*
* Configure the Tx unit of the MAC after a reset.
@@ -2663,7 +2668,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter)
* hthresh = 1 ==> prefetch when one or more available
* pthresh = 0x1f ==> prefetch if internal cache 31 or less
* BEWARE: this seems to work but should be considered first if
- * there are tx hangs or other tx related bugs
+ * there are Tx hangs or other Tx related bugs
*/
txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE;
ew32(TXDCTL(0), txdctl);
@@ -2877,7 +2882,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
if (adapter->rx_ps_pages) {
/* this is a 32 byte descriptor */
rdlen = rx_ring->count *
- sizeof(union e1000_rx_desc_packet_split);
+ sizeof(union e1000_rx_desc_packet_split);
adapter->clean_rx = e1000_clean_rx_irq_ps;
adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
} else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
@@ -2900,7 +2905,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
/*
* set the writeback threshold (only takes effect if the RDTR
* is set). set GRAN=1 and write back up to 0x4 worth, and
- * enable prefetching of 0x20 rx descriptors
+ * enable prefetching of 0x20 Rx descriptors
* granularity = 01
* wthresh = 04,
* hthresh = 04,
@@ -2981,12 +2986,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
* excessive C-state transition latencies result in
* dropped transactions.
*/
- pm_qos_update_request(
- &adapter->netdev->pm_qos_req, 55);
+ pm_qos_update_request(&adapter->netdev->pm_qos_req, 55);
} else {
- pm_qos_update_request(
- &adapter->netdev->pm_qos_req,
- PM_QOS_DEFAULT_VALUE);
+ pm_qos_update_request(&adapter->netdev->pm_qos_req,
+ PM_QOS_DEFAULT_VALUE);
}
}
@@ -3152,7 +3155,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
/* lower 16 bits has Rx packet buffer allocation size in KB */
pba &= 0xffff;
/*
- * the Tx fifo also stores 16 bytes of information about the tx
+ * the Tx fifo also stores 16 bytes of information about the Tx
* but don't include ethernet FCS because hardware appends it
*/
min_tx_space = (adapter->max_frame_size +
@@ -3175,7 +3178,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
pba -= min_tx_space - tx_space;
/*
- * if short on Rx space, Rx wins and must trump tx
+ * if short on Rx space, Rx wins and must trump Tx
* adjustment or use Early Receive if available
*/
if ((pba < min_rx_space) &&
@@ -4039,11 +4042,11 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
adapter->netdev->name,
adapter->link_speed,
(adapter->link_duplex == FULL_DUPLEX) ?
- "Full Duplex" : "Half Duplex",
+ "Full Duplex" : "Half Duplex",
((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
- "RX/TX" :
- ((ctrl & E1000_CTRL_RFCE) ? "RX" :
- ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
+ "Rx/Tx" :
+ ((ctrl & E1000_CTRL_RFCE) ? "Rx" :
+ ((ctrl & E1000_CTRL_TFCE) ? "Tx" : "None")));
}
static bool e1000e_has_link(struct e1000_adapter *adapter)
@@ -4338,7 +4341,7 @@ link_up:
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = 1;
- /* flush partial descriptors to memory before detecting tx hang */
+ /* flush partial descriptors to memory before detecting Tx hang */
if (adapter->flags2 & FLAG2_DMA_BURST) {
ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
@@ -4529,7 +4532,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
buffer_info->next_to_watch = i;
buffer_info->dma = dma_map_single(&pdev->dev,
skb->data + offset,
- size, DMA_TO_DEVICE);
+ size, DMA_TO_DEVICE);
buffer_info->mapped_as_page = false;
if (dma_mapping_error(&pdev->dev, buffer_info->dma))
goto dma_error;
@@ -4576,7 +4579,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
}
}
- segs = skb_shinfo(skb)->gso_segs ?: 1;
+ segs = skb_shinfo(skb)->gso_segs ? : 1;
/* multiply data chunks by size of headers */
bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
@@ -4588,13 +4591,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter,
return count;
dma_error:
- dev_err(&pdev->dev, "TX DMA map failed\n");
+ dev_err(&pdev->dev, "Tx DMA map failed\n");
buffer_info->dma = 0;
if (count)
count--;
while (count--) {
- if (i==0)
+ if (i == 0)
i += tx_ring->count;
i--;
buffer_info = &tx_ring->buffer_info[i];
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index d6f618d..4dd9b63 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -62,10 +62,9 @@ MODULE_PARM_DESC(copybreak,
module_param_array_named(X, X, int, &num_##X, 0); \
MODULE_PARM_DESC(X, desc);
-
/*
* Transmit Interrupt Delay in units of 1.024 microseconds
- * Tx interrupt delay needs to typically be set to something non zero
+ * Tx interrupt delay needs to typically be set to something non-zero
*
* Valid Range: 0-65535
*/
@@ -112,6 +111,7 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
#define DEFAULT_ITR 3
#define MAX_ITR 100000
#define MIN_ITR 100
+
/* IntMode (Interrupt Mode)
*
* Valid Range: 0 - 2
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index eb6cbad..326788e 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -640,7 +640,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data;
- /* Enable CRS on TX. This must be set for half-duplex operation. */
+ /* Enable CRS on Tx. This must be set for half-duplex operation. */
ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
if (ret_val)
goto out;
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists