| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110128124331.GD1140@DLHLAP0379> Date: Fri, 28 Jan 2011 18:13:31 +0530 From: Shiraz Hashim <shiraz.hashim@...com> To: Chuck Lever <chuck.lever@...cle.com> Cc: Deepak SIKRI <deepak.sikri@...com>, Armando VISCONTI <armando.visconti@...com>, Trond Myklebust <Trond.Myklebust@...app.com>, "netdev@...r.kernel.org" <netdev@...r.kernel.org>, Linux NFS Mailing List <linux-nfs@...r.kernel.org>, Viresh KUMAR <viresh.kumar@...com>, Peppe CAVALLARO <peppe.cavallaro@...com>, amitgoel <amit.goel@...com> Subject: Re: STMMAC driver: NFS Problem on 2.6.37 Hello Chuck, On Wed, Jan 26, 2011 at 02:04:21AM +0800, Chuck Lever wrote: > See analysis in line. > > On Jan 25, 2011, at 6:56 AM, deepaksi wrote: [...] > > We have made following observations > > 1. It seems that the time taken by phy auto negotiation process is > > long and as soon as the link gets up rpc ping request is getting > > timed out and we receive "Unable to reach ICMP" error. The time > > out error is same even if you do not connect a network cable and > > do a nfs boot. > > > > 2. We tried to modify the rate at which the work queue is > > scheduled in the phy framework. instead of scheduling every HZ ( 1 > > sec), we modified it to HZ/10. We did not received > > the error. This probably reduced the margin of the phy framework > > informing the kernel that the link is up. > > > > 3. We tried to use another network card and did a nfs boot. The > > only relevant difference we could find was the time of auto > > negotiation. > > Can you post a similar debugging dump of a root mount that succeeds > using a different network card? Following is the NFS boot log with a PCIe based e1000e nic card. .... .... [ 1.570000] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.580000] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.590000] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 [ 1.590000] e1000e: Copyright (c) 1999 - 2010 Intel Corporation. [ 1.600000] e1000e 0000:01:00.0: Disabling ASPM L1 [ 1.600000] PCI: enabling device 0000:01:00.0 (0140 -> 0142) [ 1.610000] e1000e 0000:01:00.0: (unregistered net_device): Failed to initialize MSI interrupts. Falling back to legacy interrupts. [ 1.850000] e1000e 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:17:ec:02:ff [ 1.860000] e1000e 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.870000] e1000e 0000:01:00.0: eth0: MAC: 1, PHY: 4, PBA No: d50861-004 [ 1.870000] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 [ 1.880000] Copyright (c) 2007-2009 Intel Corporation. [ 1.880000] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 1.890000] Copyright (c) 2009 Intel Corporation. [ 1.900000] CAN device driver interface [ 1.900000] STMMAC driver: [ 1.900000] platform registration... [ 1.910000] done! [ 1.910000] DWMAC1000 - user ID: 0x10, Synopsys ID: 0x35 [ 1.920000] Enhanced descriptor structure [ 1.920000] eth1 - (dev. name: stmmaceth - id: 0, IRQ #65 [ 1.920000] IO base addr: 0xd00f0000) [ 1.940000] STMMAC MII Bus: probed [ 1.940000] eth1: PHY ID 20005c7a at 5 IRQ -1 (0:05) active [ 1.950000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.950000] spear-ehci spear-ehci.0: SPEAr EHCI [ 1.960000] spear-ehci spear-ehci.0: new USB bus registered, assigned bus number 1 [ 2.020000] spear-ehci spear-ehci.0: irq 96, io mem 0xe4800000 [ 2.040000] spear-ehci spear-ehci.0: USB 0.0 started, EHCI 1.00 [ 2.040000] hub 1-0:1.0: USB hub found [ 2.050000] hub 1-0:1.0: 1 port detected [ 2.050000] spear-ehci spear-ehci.1: SPEAr EHCI [ 2.060000] spear-ehci spear-ehci.1: new USB bus registered, assigned bus number 2 [ 2.120000] spear-ehci spear-ehci.1: irq 98, io mem 0xe5800000 [ 2.140000] spear-ehci spear-ehci.1: USB 0.0 started, EHCI 1.00 [ 2.140000] hub 2-0:1.0: USB hub found [ 2.150000] hub 2-0:1.0: 1 port detected [ 2.150000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.160000] spear-ohci spear-ohci.0: SPEAr OHCI [ 2.160000] spear-ohci spear-ohci.0: new USB bus registered, assigned bus number 3 [ 2.200000] spear-ohci spear-ohci.0: irq 97, io mem 0xe4000000 [ 2.260000] hub 3-0:1.0: USB hub found [ 2.270000] hub 3-0:1.0: 1 port detected [ 2.270000] spear-ohci spear-ohci.1: SPEAr OHCI [ 2.280000] spear-ohci spear-ohci.1: new USB bus registered, assigned bus number 4 [ 2.310000] spear-ohci spear-ohci.1: irq 99, io mem 0xe5000000 [ 2.370000] hub 4-0:1.0: USB hub found [ 2.380000] hub 4-0:1.0: 1 port detected [ 2.380000] Initializing USB Mass Storage driver... [ 2.390000] usbcore: registered new interface driver usb-storage [ 2.390000] USB Mass Storage support registered. [ 2.400000] usbcore: registered new interface driver usbtest [ 2.400000] designware_udc designware_udc: Device Synopsys UDC probed csr d00fe000: plug d01c4000 [ 2.410000] zero gadget: Gadget Zero, version: Cinco de Mayo 2008 [ 2.420000] zero gadget: zero ready [ 2.420000] designware_udc designware_udc: reg gadget driver 'zero' [ 2.430000] mice: PS/2 mouse device common for all mice [ 2.440000] input: Spear Keyboard as /devices/platform/keyboard/input/input0 [ 2.470000] usbcore: registered new interface driver usbtouchscreen [ 2.470000] input: STMPE610 Touchscreen as /devices/ssp-pl022/spi0.0/input/input1 [ 2.670000] stmpe610-spi spi0.0: Detected Touch Screen with chip id: ffff and version: ff [ 2.690000] rtc-spear rtc-spear: rtc core: registered rtc-spear as rtc0 [ 2.730000] i2c /dev entries driver [ 2.730000] cortexa9-wdt cortexa9-wdt: registration successful [ 2.740000] dw_dmac.0: DesignWare DMA Controller, 8 channels [ 2.750000] dw_dmac.1: DesignWare DMA Controller, 8 channels [ 2.760000] sdhci: Secure Digital Host Controller Interface driver [ 2.770000] sdhci: Copyright(c) Pierre Ossman [ 2.780000] mmc0: SDHCI controller on sdhci [platform] using DMA [ 2.780000] IPv4 over IPv4 tunneling driver [ 2.790000] TCP cubic registered [ 2.790000] NET: Registered protocol family 17 [ 2.800000] can: controller area network core (rev 20090105 abi 8) [ 2.810000] NET: Registered protocol family 29 [ 2.810000] can: raw protocol (rev 20090105) [ 2.810000] can: broadcast manager protocol (rev 20090105 t) [ 2.820000] rtc-spear rtc-spear: hctosys: invalid date/time [ 4.520000] IP-Config: Complete: [ 4.520000] device=eth0, addr=192.168.1.10, mask=255.255.255.0, gw=192.168.1.1, [ 4.530000] host=192.168.1.10, domain=, nis-domain=(none), [ 4.530000] bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath= [ 4.540000] Root-NFS: nfsroot=/opt/STM/STLinux-2.4/devkit/armv7/target [ 4.550000] NFS: nfs mount opts='nolock,addr=192.168.1.1' [ 4.550000] NFS: parsing nfs mount option 'nolock' [ 4.560000] NFS: parsing nfs mount option 'addr=192.168.1.1' [ 4.560000] NFS: MNTPATH: '/opt/STM/STLinux-2.4/devkit/armv7/target' [ 4.570000] NFS: sending MNT request for 192.168.1.1:/opt/STM/STLinux-2.4/devkit/armv7/target [ 4.580000] Calling rpc_create [ 4.580000] RPC: set up xprt to 192.168.1.1 (autobind) via tcp [ 4.590000] RPC: created transport cfb13800 with 16 slots [ 4.590000] xprt_create_transport: RPC: created transport cfb13800 with 16 slots [ 4.600000] RPC: creating mount client for 192.168.1.1 (xprt cfb13800) [ 4.610000] RPC: creating UNIX authenticator for client cfaae800 [ 4.620000] Calling rpc_ping [ 4.620000] RPC: new task initialized, procpid 1 [ 4.620000] RPC: allocated task cfa93100 [ 4.630000] RPC: 1 __rpc_execute flags=0x680 [ 4.630000] RPC: 1 call_start mount3 proc NULL (sync) [ 4.640000] RPC: 1 call_reserve (status 0) [ 4.640000] RPC: 1 reserved req cfb20000 xid a026435b [ 4.650000] RPC: 1 call_reserveresult (status 0) [ 4.650000] RPC: 1 call_refresh (status 0) [ 4.660000] RPC: 1 holding NULL cred c0492798 [ 4.660000] RPC: 1 refreshing NULL cred c0492798 [ 4.670000] RPC: 1 call_refreshresult (status 0) [ 4.670000] RPC: 1 call_allocate (status 0) [ 4.680000] RPC: 1 allocated buffer of size 92 at cfb14000 [ 4.680000] RPC: 1 call_bind (status 0) [ 4.690000] RPC: 1 rpcb_getport_async(192.168.1.1, 100005, 3, 6) [ 4.690000] RPC: 1 sleep_on(queue "xprt_binding" time 4294937765) [ 4.700000] RPC: 1 added to queue cfb138a4 "xprt_binding" [ 4.710000] RPC: 1 setting alarm for 60000 ms [ 4.710000] RPC: 1 rpcb_getport_async: trying rpcbind version 2 [ 4.720000] Calling rpc_create [ 4.720000] RPC: set up xprt to 192.168.1.1 (port 111) via tcp [ 4.730000] RPC: created transport cfb14800 with 16 slots [ 4.730000] xprt_create_transport: RPC: created transport cfb14800 with 16 slots [ 4.740000] RPC: creating rpcbind client for 192.168.1.1 (xprt cfb14800) [ 4.750000] RPC: creating UNIX authenticator for client cfaaea00 [ 4.750000] rpc_create returns 0xcfaaea00 [ 4.760000] RPC: new task initialized, procpid 1 [ 4.760000] RPC: allocated task cfa93180 [ 4.770000] RPC: rpc_release_client(cfaaea00) [ 4.770000] RPC: 1 sync task going to sleep [ 4.780000] RPC: 2 __rpc_execute flags=0x681 [ 4.780000] RPC: 2 call_start rpcbind2 proc GETPORT (async) [ 4.790000] RPC: 2 call_reserve (status 0) [ 4.790000] RPC: 2 reserved req cfb21000 xid aa41d674 [ 4.800000] RPC: 2 call_reserveresult (status 0) [ 4.800000] RPC: 2 call_refresh (status 0) [ 4.810000] RPC: 2 looking up UNIX cred [ 4.810000] RPC: looking up UNIX cred [ 4.820000] RPC: allocating UNIX cred for uid 0 gid 0 [ 4.820000] RPC: 2 refreshing UNIX cred cfa93200 [ 4.830000] RPC: 2 call_refreshresult (status 0) [ 4.830000] RPC: 2 call_allocate (status 0) [ 4.840000] RPC: 2 allocated buffer of size 412 at cfb15000 [ 4.840000] RPC: 2 call_bind (status 0) [ 4.850000] RPC: 2 call_connect xprt cfb14800 is not connected [ 4.850000] RPC: 2 xprt_connect xprt cfb14800 is not connected [ 4.860000] RPC: 2 sleep_on(queue "xprt_pending" time 4294937782) [ 4.860000] RPC: 2 added to queue cfb149dc "xprt_pending" [ 4.870000] RPC: 2 setting alarm for 60000 ms [ 4.880000] RPC: xs_connect scheduled xprt cfb14800 [ 4.880000] RPC: xs_bind 0.0.0.0:0: ok (0) [ 4.890000] RPC: worker connecting xprt cfb14800 via tcp to 192.168.1.1 (port 111) [ 4.890000] RPC: cfb14800 connect status 115 connected 0 sock state 2 [ 5.870000] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 5.900000] RPC: xs_tcp_state_change client cfb14800... [ 5.900000] RPC: state 1 conn 0 dead 0 zapped 1 sk_shutdown 0 [ 5.910000] RPC: 2 __rpc_wake_up_task (now 4294937887) [ 5.910000] RPC: 2 disabling timer [ 5.920000] RPC: 2 removed from queue cfb149dc "xprt_pending" [ 5.920000] RPC: __rpc_wake_up_task done [ 5.930000] RPC: 2 __rpc_execute flags=0x681 [ 5.930000] RPC: 2 xprt_connect_status: retrying [ 5.940000] RPC: 2 call_connect_status (status -11) [ 5.940000] RPC: 2 call_transmit (status 0) [ 5.950000] RPC: 2 xprt_prepare_transmit [ 5.950000] RPC: 2 rpc_xdr_encode (status 0) [ 5.960000] RPC: 2 marshaling UNIX cred cfa93200 [ 5.960000] RPC: 2 using AUTH_UNIX cred cfa93200 to wrap rpc data [ 5.970000] RPC: 2 encoding PMAP_GETPORT call (100005, 3, 6, 0) [ 5.980000] RPC: 2 xprt_transmit(92) [ 5.980000] RPC: xs_tcp_send_request(92) = 92 [ 5.980000] RPC: xs_tcp_data_ready... [ 5.990000] RPC: xs_tcp_data_recv started [ 5.990000] RPC: reading TCP record fragment of length 28 [ 6.000000] RPC: reading XID (4 bytes) [ 6.000000] RPC: reading request with XID aa41d674 [ 6.010000] RPC: reading CALL/REPLY flag (4 bytes) [ 6.010000] RPC: read reply XID aa41d674 [ 6.020000] RPC: XID aa41d674 read 20 bytes [ 6.020000] RPC: xprt = cfb14800, tcp_copied = 28, tcp_offset = 28, tcp_reclen = 28 [ 6.030000] RPC: 2 xid aa41d674 complete (28 bytes received) [ 6.040000] RPC: xs_tcp_data_recv done [ 6.040000] RPC: 2 xmit complete [ 6.050000] RPC: wake_up_next(cfb14974 "xprt_resend") [ 6.050000] RPC: wake_up_next(cfb1490c "xprt_sending") [ 6.060000] RPC: 2 call_status (status 28) [ 6.060000] RPC: 2 call_decode (status 28) [ 6.070000] RPC: 2 validating UNIX cred cfa93200 [ 6.070000] RPC: 2 using AUTH_UNIX cred cfa93200 to unwrap rpc data [ 6.080000] RPC: 2 PMAP_GETPORT result: 48734 [ 6.080000] RPC: 2 call_decode result 0 [ 6.090000] RPC: setting port for xprt cfb13800 to 48734 [ 6.090000] RPC: 2 rpcb_getport_done(status 0, port 48734) [ 6.100000] RPC: 2 return 0, status 0 [ 6.100000] RPC: 2 release task [ 6.110000] RPC: freeing buffer of size 412 at cfb15000 [ 6.110000] RPC: 2 release request cfb21000 [ 6.120000] RPC: wake_up_next(cfb14a44 "xprt_backlog") [ 6.120000] RPC: rpc_release_client(cfaaea00) [ 6.130000] RPC: destroying rpcbind client for 192.168.1.1 [ 6.130000] RPC: destroying transport cfb14800 [ 6.140000] RPC: xs_destroy xprt cfb14800 [ 6.140000] RPC: xs_close xprt cfb14800 [ 6.150000] RPC: disconnected transport cfb14800 [ 6.150000] RPC: 2 freeing task [ 6.160000] RPC: 1 __rpc_wake_up_task (now 4294937912) [ 6.160000] RPC: 1 disabling timer [ 6.160000] RPC: 1 removed from queue cfb138a4 "xprt_binding" [ 6.170000] RPC: __rpc_wake_up_task done .... .... > > Are there some changes in the kernel framework w.r.t rpc ping time > > out ? This problem was not there in previous kernels. > > There have been changes in the RPC socket code around how it manages > recovery from failed attempts to connect. We also have new logic > now in the RPC client that causes RPC ping to fail immediately if a > host can't be reached. > > Thanks for your efforts so far. It would be helpful if you could > bisect to determine which commit(s) introduced this RPC client > behavior (or any related changes to your network driver behavior). We would do so in coming days. By then can you please guide us if you have something in mind. -- regards Shiraz -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists