netdev - RE: [PATCH net-next-2.6 v7 1/1] can: c_can: Added support for Bosch C

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <D5ECB3C7A6F99444980976A8C6D896384DEE3666E9@EAPEX1MAIL1.st.com>
Date:	Mon, 14 Feb 2011 11:54:58 +0800
From:	Bhupesh SHARMA <bhupesh.sharma@...com>
To:	David Miller <davem@...emloft.net>,
	"mkl@...gutronix.de" <mkl@...gutronix.de>
Cc:	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"Socketcan-core@...ts.berlios.de" <Socketcan-core@...ts.berlios.de>
Subject: RE: [PATCH net-next-2.6 v7 1/1] can: c_can: Added support for Bosch
 C_CAN controller

Hi David,

> -----Original Message-----
> From: David Miller [mailto:davem@...emloft.net]
> Sent: Monday, February 14, 2011 12:36 AM
> To: mkl@...gutronix.de
> Cc: Bhupesh SHARMA; netdev@...r.kernel.org; Socketcan-
> core@...ts.berlios.de
> Subject: Re: [PATCH net-next-2.6 v7 1/1] can: c_can: Added support for
> Bosch C_CAN controller
> 
> From: David Miller <davem@...emloft.net>
> Date: Sun, 13 Feb 2011 10:52:16 -0800 (PST)
> 
> > From: Marc Kleine-Budde <mkl@...gutronix.de>
> > Date: Sat, 12 Feb 2011 18:18:37 +0100
> >
> >> On 02/11/2011 11:17 AM, Bhupesh Sharma wrote:
> >>> Bosch C_CAN controller is a full-CAN implementation which is
> compliant
> >>> to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual
> can be
> >>> obtained from:
> >>> http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/
> >>> c_can/users_manual_c_can.pdf
> >>>
> >>> This patch adds the support for this controller.
> >>> The following are the design choices made while writing the
> controller
> >>> driver:
> >>> 1. Interface Register set IF1 has be used only in the current
> design.
> >>> 2. Out of the 32 Message objects available, 16 are kept aside for
> RX
> >>>    purposes and the rest for TX purposes.
> >>> 3. NAPI implementation is such that both the TX and RX paths
> function
> >>>    in polling mode.
> >>>
> >>> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...com>
> >>
> >> Good work!
> >>
> >> Acked-by: Marc Kleine-Budde <mkl@...gutronix.de>
> >
> > Applied.
> 
> Actually, I'm reverting because this causes build regressions:
> 
> ERROR: "clk_get_rate" [drivers/net/can/c_can/c_can_platform.ko]
> undefined!
> ERROR: "clk_get" [drivers/net/can/c_can/c_can_platform.ko] undefined!
> ERROR: "clk_put" [drivers/net/can/c_can/c_can_platform.ko] undefined!

Oops.. I will send a v8 to correct this compilation issue a.s.a.p.

Regards,
Bhupesh
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html