netdev - Re: Read sent/received bytes -- without opening a file in /sys or /proc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <4D5D5BC7.50802@candelatech.com>
Date:	Thu, 17 Feb 2011 09:32:55 -0800
From:	Ben Greear <greearb@...delatech.com>
To:	Jan-Philip gehrcke <jgehrcke@...glemail.com>
CC:	netdev@...r.kernel.org
Subject: Re: Read sent/received bytes -- without opening a file in /sys or
 /proc

On 02/17/2011 02:57 AM, Jan-Philip gehrcke wrote:
> Dear list,
>
> I'm about to write a small C program for measurements of the bandwidth
> on some network interface of my home router (uname -a: Linux
> fritz.fonwlan.box 2.6.19.2 #2 Thu Nov 18 16:35:17 CET 2010 mips
> GNU/Linux). I would like to accomplish very *precise* results, while
> keeping the absolute measurement time low.
>
> In general, this problem requires the knowledge of time and byte
> differences. Therefore, two time measurements and two byte counter
> measurements for each, received and sent bytes, are required. Currently,
> I am measuring time via
>
>      clock_gettime(CLOCK_MONOTONIC, ...)
>
> and reading the byte counters by reading files in sysfs, e.g.
>
>       /sys/class/net/${interface}/statistics/rx_bytes.
>
> This is very easy and works well, but reading these files four times
> takes some (varying) time* on my device, which introduces an error to my
> calculation.
>
> Hence, I am wondering, if there is a way to receive this kind of data
> directly and much faster, via "kernel API". My question is related to
> this unanswered one from 2005:
> http://linux.derkeiler.com/Mailing-Lists/RedHat/2005-02/0557.html
>
> *On my device, reading such a file and interpreting the result as
> integer takes 1-10 ms, measured via:
>
>      clock_gettime(CLOCK_MONOTONIC,&t_start);
>      rx_bytes = read_int_from_file("/sys/class/net/wan/statistics/rx_bytes");
>      clock_gettime(CLOCK_MONOTONIC,&t_end);
>
> read_int_from_file() basically consists of fopen(), fgets(), and sscanf().
>
>
> Please note that I don't have kernel/driver programming experience so far.
>
> Thank you for help and any suggestions!
>
>      Jan-Philip Gehrcke

The netlink API can get stats for you, but I don't know if it would
be any more accurate time-wise.  It's not exactly trivial to
implement this API, but you can look at the 'ip' program to get
an idea:

git clone git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/iproute2.git


There is also /proc/net/dev, but that may be worse than using sysfs
as far as performance and time accuracy goes.

Thanks,
Ben


-- 
Ben Greear <greearb@...delatech.com>
Candela Technologies Inc  http://www.candelatech.com

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html