[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAA7B3D71228413B9F7F3C0F5A011119@subhasishg>
Date: Fri, 18 Feb 2011 14:39:15 +0530
From: "Subhasish Ghosh" <subhasish@...tralsolutions.com>
To: "Marc Kleine-Budde" <mkl@...gutronix.de>
Cc: "Wolfgang Grandegger" <wg@...ndegger.com>,
<sachi@...tralsolutions.com>,
<davinci-linux-open-source@...ux.davincidsp.com>,
"CAN NETWORK DRIVERS" <netdev@...r.kernel.org>, <nsekhar@...com>,
"LKML" <linux-kernel@...r.kernel.org>,
"CAN NETWORK DRIVERS" <socketcan-core@...ts.berlios.de>,
<m-watkins@...com>, <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v2 09/13] can: pruss CAN driver.
Ok, will do NAPI
On 02/18/2011 09:15 AM, Subhasish Ghosh wrote:
>> On 02/18/2011 08:07 AM, Subhasish Ghosh wrote:
>>> --------------------------------------------------
>>> From: "Kurt Van Dijck" <kurt.van.dijck@....be>
>>
>> ...
>>>>> + /* register interrupt handler */
>>>>> + err = request_irq(priv->trx_irq, &omapl_rx_can_intr, IRQF_SHARED,
>>>>> + "pru_can_irq", ndev);
>>>> you're doing a lot of work _in_ the irq handler. Maybe threaded irq?
>>>>
>>> SG -Ok, will do
>>
>> No, please use NAPI instead.
>
> We are using h/w filters, so the number of interrupts coming into the
> processor are not hogging it.
> I feel that we may not require an interrupt mitigation.
As davem stated the other day, all new drivers should use NAPI.
regards, Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists