netdev - [PATCH 2/2] DM9000B: Fix PHY power for network down/up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <4D618B5D.5040001@henry.nestler.mail.gmail.com>
Date:	Sun, 20 Feb 2011 22:45:01 +0100
From:	Henry Nestler <henry.nestler@...il.com>
To:	netdev@...r.kernel.org
CC:	akpm@...ux-foundation.org, tori@...appy.mine.nu,
	linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 2/2] DM9000B: Fix PHY power for network down/up

DM9000 revision B needs 1 ms delay after PHY power on (see spec), and PHY
power must on in register DM9000_GPR before all other settings will change.
Remember, that register DM9000_GPR was not changed by reset sequence.

Without these fix the FIFO goes out of sync and sends wrong data after
sequence of "ifconfig ethX down ; sleep 3 ; ifconfig ethX up".
---
Kernel version 2.6.38-rc5

 drivers/net/dm9000.c |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 2d4c4fc..5925569 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -802,10 +802,7 @@ dm9000_init_dm9000(struct net_device *dev)
 	/* Checksum mode */
 	dm9000_set_rx_csum_unlocked(dev, db->rx_csum);
 
-	/* GPIO0 on pre-activate PHY */
-	iow(db, DM9000_GPR, 0);	/* REG_1F bit0 activate phyxcer */
 	iow(db, DM9000_GPCR, GPCR_GEP_CNTL);	/* Let GPIO0 output */
-	iow(db, DM9000_GPR, 0);	/* Enable PHY */
 
 	ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
 
@@ -1194,6 +1191,10 @@ dm9000_open(struct net_device *dev)
 	if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
 		return -EAGAIN;
 
+	/* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
+	iow(db, DM9000_GPR, 0);	/* REG_1F bit0 activate phyxcer */
+	udelay(1000); /* delay needs by DM9000B */
+
 	/* Initialize DM9000 board */
 	dm9000_reset(db);
 	dm9000_init_dm9000(dev);
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html