| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1298289514-15671-2-git-send-email-amit.salecha@qlogic.com>
Date: Mon, 21 Feb 2011 03:58:33 -0800
From: Amit Kumar Salecha <amit.salecha@...gic.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, ameen.rahman@...gic.com,
anirban.chakraborty@...gic.com
Subject: [PATCH NEXT 1/2] qlcnic: fix type of module parameters
o Module parameters auto_fw_reset, use_msi, use_msi_x, qlcnic_mac_learn,
and load_fw_file should be of type bool not int.
o All module parameters should have qlcnic prefix.
o Remove unnecessary macro for value "1".
Signed-off-by: Amit Kumar Salecha <amit.salecha@...gic.com>
---
drivers/net/qlcnic/qlcnic.h | 1 -
drivers/net/qlcnic/qlcnic_main.c | 46 +++++++++++++++++++-------------------
2 files changed, 23 insertions(+), 24 deletions(-)
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 44e316f..fa7f794 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -867,7 +867,6 @@ struct qlcnic_nic_intr_coalesce {
#define LINKEVENT_LINKSPEED_MBPS 0
#define LINKEVENT_LINKSPEED_ENCODED 1
-#define AUTO_FW_RESET_ENABLED 0x01
/* firmware response header:
* 63:58 - message type
* 57:56 - owner
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 37c04b4..3fd878c 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -30,25 +30,26 @@ static const char qlcnic_driver_string[] = "QLogic 1/10 GbE "
"Converged/Intelligent Ethernet Driver v" QLCNIC_LINUX_VERSIONID;
static struct workqueue_struct *qlcnic_wq;
-static int qlcnic_mac_learn;
-module_param(qlcnic_mac_learn, int, 0444);
+static bool qlcnic_mac_learn;
+module_param(qlcnic_mac_learn, bool, 0444);
MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=disabled, 1=enabled)");
-static int use_msi = 1;
-module_param(use_msi, int, 0444);
-MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled");
+static bool qlcnic_use_msi = 1;
+module_param(qlcnic_use_msi, bool, 0444);
+MODULE_PARM_DESC(qlcnic_use_msi, "MSI interrupt (0=disabled, 1=enabled");
-static int use_msi_x = 1;
-module_param(use_msi_x, int, 0444);
-MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled");
+static bool qlcnic_use_msi_x = 1;
+module_param(qlcnic_use_msi_x, bool, 0444);
+MODULE_PARM_DESC(qlcnic_use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled");
-static int auto_fw_reset = AUTO_FW_RESET_ENABLED;
-module_param(auto_fw_reset, int, 0644);
-MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled");
+static bool qlcnic_auto_fw_reset = 1;
+module_param(qlcnic_auto_fw_reset, bool, 0644);
+MODULE_PARM_DESC(qlcnic_auto_fw_reset,
+ "Auto firmware reset (0=disabled, 1=enabled");
-static int load_fw_file;
-module_param(load_fw_file, int, 0444);
-MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file");
+static bool qlcnic_load_fw_file;
+module_param(qlcnic_load_fw_file, bool, 0444);
+MODULE_PARM_DESC(qlcnic_load_fw_file, "Load firmware from (0=flash, 1=file");
static int qlcnic_config_npars;
module_param(qlcnic_config_npars, int, 0444);
@@ -404,7 +405,7 @@ qlcnic_setup_intr(struct qlcnic_adapter *adapter)
/* fall through for msi */
}
- if (use_msi && !pci_enable_msi(pdev)) {
+ if (qlcnic_use_msi && !pci_enable_msi(pdev)) {
adapter->flags |= QLCNIC_MSI_ENABLED;
adapter->tgt_status_reg = qlcnic_get_ioaddr(adapter,
msi_tgt_status[adapter->ahw.pci_func]);
@@ -658,8 +659,8 @@ qlcnic_check_options(struct qlcnic_adapter *adapter)
adapter->max_rxd = MAX_RCV_DESCRIPTORS_1G;
}
- adapter->msix_supported = !!use_msi_x;
- adapter->rss_supported = !!use_msi_x;
+ adapter->msix_supported = qlcnic_use_msi_x;
+ adapter->rss_supported = qlcnic_use_msi_x;
adapter->num_txd = MAX_CMD_DESCRIPTORS;
@@ -972,7 +973,7 @@ qlcnic_start_firmware(struct qlcnic_adapter *adapter)
else if (!err)
goto check_fw_status;
- if (load_fw_file)
+ if (qlcnic_load_fw_file)
qlcnic_request_firmware(adapter);
else {
err = qlcnic_check_flash_fw_ver(adapter);
@@ -2959,8 +2960,7 @@ qlcnic_check_health(struct qlcnic_adapter *adapter)
if (adapter->need_fw_reset)
goto detach;
- if (adapter->reset_context &&
- auto_fw_reset == AUTO_FW_RESET_ENABLED) {
+ if (adapter->reset_context && qlcnic_auto_fw_reset) {
qlcnic_reset_hw_context(adapter);
adapter->netdev->trans_start = jiffies;
}
@@ -2973,7 +2973,7 @@ qlcnic_check_health(struct qlcnic_adapter *adapter)
qlcnic_dev_request_reset(adapter);
- if ((auto_fw_reset == AUTO_FW_RESET_ENABLED))
+ if (qlcnic_auto_fw_reset)
clear_bit(__QLCNIC_FW_ATTACHED, &adapter->state);
dev_info(&netdev->dev, "firmware hang detected\n");
@@ -2982,8 +2982,8 @@ detach:
adapter->dev_state = (state == QLCNIC_DEV_NEED_QUISCENT) ? state :
QLCNIC_DEV_NEED_RESET;
- if ((auto_fw_reset == AUTO_FW_RESET_ENABLED) &&
- !test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) {
+ if (qlcnic_auto_fw_reset &&
+ !test_and_set_bit(__QLCNIC_RESETTING, &adapter->state)) {
qlcnic_schedule_work(adapter, qlcnic_detach_work, 0);
QLCDB(adapter, DRV, "fw recovery scheduled.\n");
--
1.7.3.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists