| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 24 Feb 2011 02:58:24 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Greg Rose <gregory.v.rose@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, bphilips@...ell.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next-2.6 2/7] ixgbevf: Enable jumbo frame support for X540 VF
From: Greg Rose <gregory.v.rose@...el.com>
The X540 controller allows jumbo frame setup on a per VF basis. Enable
use of jumbo frames when the VF device belongs to the X540 controller.
Signed-off-by: Greg Rose <gregory.v.rose@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ixgbevf/defines.h | 2 ++
drivers/net/ixgbevf/ixgbevf_main.c | 19 +++++++++++++++++--
2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ixgbevf/defines.h b/drivers/net/ixgbevf/defines.h
index de643eb..78abb6f 100644
--- a/drivers/net/ixgbevf/defines.h
+++ b/drivers/net/ixgbevf/defines.h
@@ -65,6 +65,8 @@ typedef u32 ixgbe_link_speed;
#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */
#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */
#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */
+#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* Only supported on the X540 */
+#define IXGBE_RXDCTL_RLPML_EN 0x00008000
/* DCA Control */
#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index 464e6c9..1f36f8f 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -51,7 +51,7 @@ char ixgbevf_driver_name[] = "ixgbevf";
static const char ixgbevf_driver_string[] =
"Intel(R) 82599 Virtual Function";
-#define DRV_VERSION "1.0.19-k0"
+#define DRV_VERSION "1.1.0-k0"
const char ixgbevf_driver_version[] = DRV_VERSION;
static char ixgbevf_copyright[] =
"Copyright (c) 2009 - 2010 Intel Corporation.";
@@ -1665,6 +1665,11 @@ static int ixgbevf_up_complete(struct ixgbevf_adapter *adapter)
j = adapter->rx_ring[i].reg_idx;
rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(j));
rxdctl |= IXGBE_RXDCTL_ENABLE;
+ if (hw->mac.type == ixgbe_mac_X540_vf) {
+ rxdctl &= ~IXGBE_RXDCTL_RLPMLMASK;
+ rxdctl |= ((netdev->mtu + ETH_HLEN + ETH_FCS_LEN) |
+ IXGBE_RXDCTL_RLPML_EN);
+ }
IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(j), rxdctl);
ixgbevf_rx_desc_queue_enable(adapter, i);
}
@@ -3217,10 +3222,16 @@ static int ixgbevf_set_mac(struct net_device *netdev, void *p)
static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
{
struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+ int max_possible_frame = MAXIMUM_ETHERNET_VLAN_SIZE;
+ u32 msg[2];
+
+ if (adapter->hw.mac.type == ixgbe_mac_X540_vf)
+ max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE;
/* MTU < 68 is an error and causes problems on some kernels */
- if ((new_mtu < 68) || (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE))
+ if ((new_mtu < 68) || (max_frame > max_possible_frame))
return -EINVAL;
hw_dbg(&adapter->hw, "changing MTU from %d to %d\n",
@@ -3228,6 +3239,10 @@ static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
/* must set new MTU before calling down or up */
netdev->mtu = new_mtu;
+ msg[0] = IXGBE_VF_SET_LPE;
+ msg[1] = max_frame;
+ hw->mbx.ops.write_posted(hw, msg, 2);
+
if (netif_running(netdev))
ixgbevf_reinit_locked(adapter);
--
1.7.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists