| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 15 Mar 2011 10:14:47 +0000
From: Jamie Iles <jamie@...ieiles.com>
To: netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Cc: nicolas.ferre@...el.com, plagnioj@...osoft.com,
Jamie Iles <jamie@...ieiles.com>
Subject: [PATCHv2 0/9] macb: add support for Cadence GEM
This patch series extends the Atmel MACB driver to support the Cadence
GEM (Gigabit Ethernet MAC) to support 10/100 operation. The GEM is
based on the MACB block but has a few moved registers and bitfields.
This patch series attempts to use the MACB accessors where block
functionallity is identical and only overrides to GEM specific
acccessors when needed.
This has been runtested on a board with a Cadence GEM and compile tested
for all at91 configurations and a number of avr32 configurations.
Changes since v1:
- AT91 now provides a fake "hclk" and "macb_clk" has been
renamed to "pclk" to be consistent with AVR32.
- Configurable GEM receive buffer size support has been added.
- pr_foo() and dev_foo() have been converted to netdev_foo()
where appropriate.
- New conditional accessors (macb_or_gem_{read,write}l) have
been introduced that do the conditional accesses dependent on
macb/gem type.
- GEM is now dynamically detected from the module ID rather than
platform device name.
Jean-Christophe, I haven't based this on your conditional clock patch as
I wasn't sure what decision had been made on that and whether the
at91/avr32 detection is reliable.
Jamie Iles (9):
at91: provide macb clks with "pclk" and "hclk" name
macb: remove conditional clk handling
macb: unify at91 and avr32 platform data
macb: convert printk to netdev_ and friends
macb: initial support for Cadence GEM
macb: support higher rate GEM MDIO clock divisors
macb: support statistics for GEM devices
macb: support DMA bus widths > 32 bits
macb: allow GEM to have configurable receive buffer size
arch/arm/mach-at91/at572d940hf.c | 8 +-
arch/arm/mach-at91/at572d940hf_devices.c | 6 +-
arch/arm/mach-at91/at91cap9.c | 8 +-
arch/arm/mach-at91/at91cap9_devices.c | 6 +-
arch/arm/mach-at91/at91rm9200_devices.c | 6 +-
arch/arm/mach-at91/at91sam9260.c | 8 +-
arch/arm/mach-at91/at91sam9260_devices.c | 6 +-
arch/arm/mach-at91/at91sam9263.c | 8 +-
arch/arm/mach-at91/at91sam9263_devices.c | 6 +-
arch/arm/mach-at91/at91sam9g45.c | 8 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 6 +-
arch/arm/mach-at91/board-1arm.c | 2 +-
arch/arm/mach-at91/board-afeb-9260v1.c | 2 +-
arch/arm/mach-at91/board-at572d940hf_ek.c | 2 +-
arch/arm/mach-at91/board-cam60.c | 2 +-
arch/arm/mach-at91/board-cap9adk.c | 2 +-
arch/arm/mach-at91/board-carmeva.c | 2 +-
arch/arm/mach-at91/board-cpu9krea.c | 2 +-
arch/arm/mach-at91/board-cpuat91.c | 2 +-
arch/arm/mach-at91/board-csb337.c | 2 +-
arch/arm/mach-at91/board-csb637.c | 2 +-
arch/arm/mach-at91/board-eb9200.c | 2 +-
arch/arm/mach-at91/board-ecbat91.c | 2 +-
arch/arm/mach-at91/board-eco920.c | 2 +-
arch/arm/mach-at91/board-foxg20.c | 2 +-
arch/arm/mach-at91/board-gsia18s.c | 2 +-
arch/arm/mach-at91/board-kafa.c | 2 +-
arch/arm/mach-at91/board-kb9202.c | 2 +-
arch/arm/mach-at91/board-neocore926.c | 2 +-
arch/arm/mach-at91/board-pcontrol-g20.c | 2 +-
arch/arm/mach-at91/board-picotux200.c | 2 +-
arch/arm/mach-at91/board-qil-a9260.c | 2 +-
arch/arm/mach-at91/board-rm9200dk.c | 2 +-
arch/arm/mach-at91/board-rm9200ek.c | 2 +-
arch/arm/mach-at91/board-sam9-l9260.c | 2 +-
arch/arm/mach-at91/board-sam9260ek.c | 2 +-
arch/arm/mach-at91/board-sam9263ek.c | 2 +-
arch/arm/mach-at91/board-sam9g20ek.c | 2 +-
arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +-
arch/arm/mach-at91/board-snapper9260.c | 2 +-
arch/arm/mach-at91/board-stamp9g20.c | 2 +-
arch/arm/mach-at91/board-usb-a9260.c | 2 +-
arch/arm/mach-at91/board-usb-a9263.c | 2 +-
arch/arm/mach-at91/board-yl-9200.c | 2 +-
arch/arm/mach-at91/include/mach/board.h | 14 +-
arch/avr32/mach-at32ap/include/mach/board.h | 5 +-
drivers/net/Kconfig | 8 +-
drivers/net/macb.c | 331 ++++++++++++++++++---------
drivers/net/macb.h | 146 ++++++++++++-
include/linux/platform_data/macb.h | 10 +
50 files changed, 466 insertions(+), 190 deletions(-)
create mode 100644 include/linux/platform_data/macb.h
--
1.7.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists