lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4D8F6313.60408@iki.fi>
Date:	Sun, 27 Mar 2011 19:17:23 +0300
From:	Timo Teräs <timo.teras@....fi>
To:	Doug Kehn <rdkehn@...oo.com>
CC:	Eric Dumazet <eric.dumazet@...il.com>,
	David Miller <davem@...emloft.net>, netdev@...r.kernel.org
Subject: Re: Multicast Fails Over Multipoint GRE Tunnel

On 03/16/2011 10:02 PM, Doug Kehn wrote:
>> From: Timo Teräs <timo.teras@....fi>
>> Subject: Re: Multicast Fails Over Multipoint GRE Tunnel
>> To: "Doug Kehn" <rdkehn@...oo.com>
>> Cc: "Eric Dumazet" <eric.dumazet@...il.com>, netdev@...r.kernel.org
>> Date: Wednesday, March 16, 2011, 2:01 AM
>> On 03/15/2011 11:35 PM, Doug Kehn
>> wrote:
>>>> From: Timo Teräs <timo.teras@....fi>
>>>> Subject: Re: Multicast Fails Over Multipoint GRE Tunnel
>>>> To: "Eric Dumazet" <eric.dumazet@...il.com>
>>>> Cc: "Doug Kehn" <rdkehn@...oo.com>, netdev@...r.kernel.org
>>>> Date: Tuesday, March 15, 2011, 12:36 PM
>>>> On 03/15/2011 05:34 PM, Eric Dumazet wrote:
>>>> Le lundi 14 mars 2011 à 16:34 -0700, Doug Kehn a écrit :
>>>> I'm running kernel version 2.6.36 on ARM XSCALE
>>>> (big-endian) and multicast over a multipoint GRE tunnel
>>>> isn't working.  For my architecture, this worked on
>>>> 2.6.26.8.  For x86, multicast over a multipoint GRE
>>>> tunnel worked with kernel version 2.6.31 but failed with
>>>> version 2.6.35.  Multicast over a multipoint GRE tunnel
>>>> fails because ipgre_header() fails the 'if (iph->daddr)'
>>>> check and reutrns -t->hlen. ipgre_header() is being
>>>> called, from neigh_connected_output(), with a non-null
>>>> daddr; the contents of daddr is zero.
>>>
>>> I wasn't sure if the above patch was in addition too
>>> or in lieu of the partial revert of ipgre_header() suggested
>>> by Eric; both cases were attempted.
>>
>> It was intended without the ipgre_header revert. The
>> partial revert does
>> not differ from full revert related to my problem.
>>
>>> The multicast scenario described does not work if only
>> the arp_mc_map() patch is applied.
>>
>> Uh. Right, the if test had wrong condition. The intention
>> was to show the idea that we create the multicast-to-multicast
>> GRE NOARP mappings in arp code where it should've been done in
>> the first place (IMHO).
>>
>> Could you try the below patch? That should work better. And
>> the ipgre_header should not be touched.
> 
> It does!  With this patch my configuration works.

I've been trying to think what would be the proper way to handle
multicast in ip_gre. I would also hope to get the ipmr code integrated
with opennhrp and ip_gre (see my earlier mail from couple of years ago:
http://lists.openwall.net/netdev/2009/08/11/27).

I believe we should just create the noarp multicast mappings as my patch
suggests. Both for IPv4 and IPv6 we map the inner multicast group to the
IPv4 header of GRE. And I believe we should drop the support of
auto-mapping unicast addresses to unicast address. Does anyone think
it's useful if sending to 1.2.3.4 in gre1, would result in automapping
the outer IP also to 1.2.3.4 in case the interface was in NOARP mode? I
believe the user should just insert manually the ARP entries in this case.

Also, I noticed that ipmr got support for multiple tables, that fixes
one of the problem I stated along with the old patch. So I'm planning to
reimplement at some point the patch from the above link. It'd probably
involve also hooking link-local multicast traffic through the ipmr
engine when using the NBMA mode. Obviously the ipmr when configured
would override the static NOARP multicast mappings.

If no one has objections I'll write up an official-looking patch that
adds the IPv4 multicast mappings, and try to fix up the same for IPv6
side. When this is done, it should be possible the get rid of the "if
((dst = tiph->daddr) == 0) {" block in ipgre_tunnel_xmit(), since we are
then creating all the mappings from the ARP code where it should be done
anyway.

Any comments for this plan? Eric? Dave?

Cheers,
  Timo
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ