[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <4DA35FEF.1030009@candelatech.com>
Date: Mon, 11 Apr 2011 13:09:19 -0700
From: Ben Greear <greearb@...delatech.com>
To: netdev <netdev@...r.kernel.org>
Subject: r8169 doesn't report link state correctly.
I notice that in kernel 2.6.38-wl, the realtek 8169 NIC doesn't
report link down when in fact there is no cable connected. Instead,
it shows 10Mbps half-duplex. I have no idea if this previously worked
or not.
[root@...2010-ath9k-1 lanforge]# ethtool -i eth1
driver: r8169
version: 2.3LK-NAPI
firmware-version:
bus-info: 0000:02:00.0
[root@...2010-ath9k-1 lanforge]# ethtool eth1
Settings for eth1:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Half
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: yes
Thanks,
Ben
--
Ben Greear <greearb@...delatech.com>
Candela Technologies Inc http://www.candelatech.com
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists