[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1302742940-22141-22-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Wed, 13 Apr 2011 18:02:17 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Emil Tantilov <emil.s.tantilov@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, bphilips@...ell.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next-2.6 21/24] ixgbe: explicitly disable 100H for x540
From: Emil Tantilov <emil.s.tantilov@...el.com>
100H is not supported on this HW, but the bit is set on the PHY.
This can result in link at 100F when advertising only 1000F.
Signed-off-by: Emil Tantilov <emil.s.tantilov@...el.com>
Tested-by: Evan Swanson <evan.swanson@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ixgbe/ixgbe_phy.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 31cc29e..fd381ea 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -449,7 +449,8 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
MDIO_MMD_AN,
&autoneg_reg);
- autoneg_reg &= ~ADVERTISE_100FULL;
+ autoneg_reg &= ~(ADVERTISE_100FULL |
+ ADVERTISE_100HALF);
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
autoneg_reg |= ADVERTISE_100FULL;
--
1.7.4.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists