Linux version 2.6.37.1 (a004477a@natter) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Tue Feb 22 02:20:57 CET 2011
Command line: BOOT_IMAGE=/vmlinuz-2.6.37.1 root=/dev/mapper/raid-root ro console=ttyS0,115200 console=tty0
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfe70000 (usable)
BIOS-e820: 00000000cfe70000 - 00000000cfe7e000 (ACPI data)
BIOS-e820: 00000000cfe7e000 - 00000000cfe81000 (ACPI NVS)
BIOS-e820: 00000000cfe81000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: Supermicro X7SB4/E/X7SB4/E, BIOS 1.2a 12/19/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0D0000000 mask FF0000000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FE0000000 write-back
4 base 120000000 mask FF0000000 write-back
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfe70 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cfe70000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cfe70000 page 4k
kernel direct mapping tables up to cfe70000 @ 1fffa000-20000000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ cfe6a000-cfe70000
RAMDISK: 37cc6000 - 37ff0000
ACPI: RSDP 00000000000f6530 00024 (v02 PTLTD )
ACPI: XSDT 00000000cfe7360b 000CC (v01 PTLTD ? XSDT 06040000 LTP 00000000)
ACPI: FACP 00000000cfe7d323 000F4 (v03 INTEL 06040000 PTL 00000002)
ACPI: DSDT 00000000cfe76e08 064A7 (v01 INTEL BEARLAKE 06040000 MSFT 03000001)
ACPI: FACS 00000000cfe80fc0 00040
ACPI: _MAR 00000000cfe7d417 0012F (v01 Intel OEMDMAR 06040000 LOHR 00000001)
ACPI: MCFG 00000000cfe7d546 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 00000000cfe7d582 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 00000000cfe7d5ba 00080 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 00000000cfe7d63a 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SPCR 00000000cfe7d662 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
ACPI: ERST 00000000cfe7d6b2 00590 (v01 SMCI ERSTTBL 06040000 SMCI 00000001)
ACPI: HEST 00000000cfe7dc42 000A8 (v01 SMCI HESTTBL 06040000 SMCI 00000001)
ACPI: BERT 00000000cfe7dcea 00030 (v01 SMCI BERTTBL 06040000 SMCI 00000001)
ACPI: EINJ 00000000cfe7dd1a 00170 (v01 SMCI EINJTBL 06040000 SMCI 00000001)
ACPI: SLIC 00000000cfe7de8a 00176 (v01 OEMID_ OEMTABLE 06040000 LTP 00000000)
ACPI: SSDT 00000000cfe74f4a 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfe74ea4 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfe74dfe 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfe74d58 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfe74cb2 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfe74c0c 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfe74b66 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfe74ac0 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
ACPI: SSDT 00000000cfe736d7 013E9 (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff8800c0000000-ffff8800c39fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009c
0: 0x00000100 -> 0x000cfe70
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048060
DMA zone: 56 pages used for memmap
DMA zone: 2 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833192 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 32, address 0xfecc0000, GSI 24-47
ACPI: IOAPIC (id[0x04] address[0xfecc0400] gsi_base[48])
IOAPIC[2]: apic_id 4, version 32, address 0xfecc0400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 88
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 24 pages/cpu @ffff8800cfc00000 s74048 r0 d24256 u1048576
pcpu-alloc: s74048 r0 d24256 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031034
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.37.1 root=/dev/mapper/raid-root ro console=ttyS0,115200 console=tty0
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Memory: 4049508k/4980736k available (5031k kernel code, 788496k absent, 142732k reserved, 1636k data, 452k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:320
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2992.591 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.18 BogoMIPS (lpj=11970364)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20101013
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E3110 @ 3.00GHz stepping 0a
Booting Node 0, Processors #1 Ok.
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
Total of 2 processors activated (11970.15 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 7
ACPI: SSDT 00000000cfe751a9 00261 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00261 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: SSDT 00000000cfe7540a 001F2 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001F2 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xfdff]
pci 0000:00:00.0: [8086:29f0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29f1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xd0000000-0xd00003ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xd0000400-0xd00007ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 0097)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 00af)
pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x1c50-0x1c57]
pci 0000:00:1f.2: reg 14: [io 0x1c44-0x1c47]
pci 0000:00:1f.2: reg 18: [io 0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 1c: [io 0x1c40-0x1c43]
pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24: [mem 0xd0000800-0xd0000fff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xd0001000-0xd00010ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f]
pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180
pci 0000:00:1f.6: reg 10: [mem 0xd0002000-0xd0002fff 64bit]
pci 0000:01:00.0: [8086:0329] type 1 class 0x000604
pci 0000:01:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: [8086:0326] type 0 class 0x000800
pci 0000:01:00.1: reg 10: [mem 0xd0100000-0xd0100fff]
pci 0000:01:00.2: [8086:032a] type 1 class 0x000604
pci 0000:01:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.2: PME# disabled
pci 0000:01:00.3: [8086:0327] type 0 class 0x000800
pci 0000:01:00.3: reg 10: [mem 0xd0101000-0xd0101fff]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.0: PCI bridge to [bus 02-02]
pci 0000:01:00.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:01:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:01:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.2: PCI bridge to [bus 03-03]
pci 0000:01:00.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:01:00.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:01:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: [8086:10c9] type 0 class 0x000200
pci 0000:05:00.0: reg 10: [mem 0xd0220000-0xd023ffff]
pci 0000:05:00.0: reg 14: [mem 0xd0400000-0xd07fffff]
pci 0000:05:00.0: reg 18: [io 0x2000-0x201f]
pci 0000:05:00.0: reg 1c: [mem 0xd0200000-0xd0203fff]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x003fffff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: [8086:10c9] type 0 class 0x000200
pci 0000:05:00.1: reg 10: [mem 0xd0240000-0xd025ffff]
pci 0000:05:00.1: reg 14: [mem 0xd0800000-0xd0bfffff]
pci 0000:05:00.1: reg 18: [io 0x2020-0x203f]
pci 0000:05:00.1: reg 1c: [mem 0xd0204000-0xd0207fff]
pci 0000:05:00.1: reg 30: [mem 0x00000000-0x003fffff pref]
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.1: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd0bfffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0d:00.0: [8086:108c] type 0 class 0x000200
pci 0000:0d:00.0: reg 10: [mem 0xd0c00000-0xd0c1ffff]
pci 0000:0d:00.0: reg 18: [io 0x3000-0x301f]
pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0d:00.0: PME# disabled
pci 0000:0d:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xd0c00000-0xd0cfffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0f:00.0: [8086:109a] type 0 class 0x000200
pci 0000:0f:00.0: reg 10: [mem 0xd0d00000-0xd0d1ffff]
pci 0000:0f:00.0: reg 18: [io 0x4000-0x401f]
pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0f:00.0: PME# disabled
pci 0000:0f:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 0f-0f]
pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.5: bridge window [mem 0xd0d00000-0xd0dfffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:11:04.0: [1002:515e] type 0 class 0x000300
pci 0000:11:04.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
pci 0000:11:04.0: reg 14: [io 0x5000-0x50ff]
pci 0000:11:04.0: reg 18: [mem 0xd0e00000-0xd0e0ffff]
pci 0000:11:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:11:04.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1e.0: bridge window [mem 0xd0e00000-0xd0efffff]
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 1f 1f
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:11:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009cc00 - 000000000009ffff
reserve RAM buffer: 00000000cfe70000 - 00000000cfffffff
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3f]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xd0000000-0xdfffffff window]
pnp 00:00: [io 0x0d00-0xfdff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0024-0x0025]
pnp 00:01: [io 0x0028-0x0029]
pnp 00:01: [io 0x002c-0x002d]
pnp 00:01: [io 0x002e-0x002f]
pnp 00:01: [io 0x0030-0x0031]
pnp 00:01: [io 0x0034-0x0035]
pnp 00:01: [io 0x0038-0x0039]
pnp 00:01: [io 0x003c-0x003d]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: [io 0x0080]
pnp 00:01: [io 0x0090-0x009f]
pnp 00:01: [io 0x00a4-0x00a5]
pnp 00:01: [io 0x00a8-0x00a9]
pnp 00:01: [io 0x00ac-0x00ad]
pnp 00:01: [io 0x00b0-0x00b5]
pnp 00:01: [io 0x00b8-0x00b9]
pnp 00:01: [io 0x00bc-0x00bd]
pnp 00:01: [io 0x0295-0x0296]
pnp 00:01: [io 0x0800-0x080f]
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1180-0x11bf]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0xfe00]
pnp 00:01: [mem 0xfed14000-0xfed17fff]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xfef00000-0xfeffffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00fe]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [mem 0xff800000-0xffffffff]
pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0a: [io 0x03f8-0x03ff]
pnp 00:0a: [irq 4]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0b: [io 0x02f8-0x02ff]
pnp 00:0b: [irq 3]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [io 0x03f0-0x03f5]
pnp 00:0c: [io 0x03f7]
pnp 00:0c: [irq 6]
pnp 00:0c: [dma 2]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0700 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0295-0x0296] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1180-0x11bf] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0xfe00] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
pci 0000:00:1c.0: BAR 9: assigned [mem 0xd1000000-0xd17fffff pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xd1800000-0xd19fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-02]
pci 0000:01:00.0: bridge window [io disabled]
pci 0000:01:00.0: bridge window [mem disabled]
pci 0000:01:00.0: bridge window [mem pref disabled]
pci 0000:01:00.2: PCI bridge to [bus 03-03]
pci 0000:01:00.2: bridge window [io disabled]
pci 0000:01:00.2: bridge window [mem disabled]
pci 0000:01:00.2: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:05:00.0: BAR 6: assigned [mem 0xd1000000-0xd13fffff pref]
pci 0000:05:00.1: BAR 6: assigned [mem 0xd1400000-0xd17fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd0200000-0xd0bfffff]
pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd17fffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xd0c00000-0xd0cfffff]
pci 0000:00:1c.4: bridge window [mem 0xd1800000-0xd19fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0f-0f]
pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.5: bridge window [mem 0xd0d00000-0xd0dfffff]
pci 0000:00:1c.5: bridge window [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci 0000:11:04.0: BAR 6: assigned [mem 0xd0e20000-0xd0e3ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 11-11]
pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1e.0: bridge window [mem 0xd0e00000-0xd0efffff]
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:01:00.0: setting latency timer to 64
pci 0000:01:00.2: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xd0200000-0xd0bfffff]
pci_bus 0000:05: resource 2 [mem 0xd1000000-0xd17fffff pref]
pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0d: resource 1 [mem 0xd0c00000-0xd0cfffff]
pci_bus 0000:0d: resource 2 [mem 0xd1800000-0xd19fffff 64bit pref]
pci_bus 0000:0f: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:0f: resource 1 [mem 0xd0d00000-0xd0dfffff]
pci_bus 0000:0f: resource 2 [mem 0xd1a00000-0xd1bfffff 64bit pref]
pci_bus 0000:11: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:11: resource 1 [mem 0xd0e00000-0xd0efffff]
pci_bus 0000:11: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:11: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:11: resource 10 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (32 != 64), using 64 bytes
pci 0000:11:04.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 3240k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800cb600000 - ffff8800cf600000
software IO TLB at phys 0xcb600000 - 0xcf600000
Simple Boot Flag at 0x36 set to 0x1
NTFS driver 2.1.29 [Flags: R/W].
Btrfs loaded
msgmni has been set to 7915
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 0 15
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 0 15
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 0 15
\_SB_.PCI0:_OSC evaluation returned wrong type
_OSC request data:1 0 15
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: irq 88 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd0000800 port 0xd0000900 irq 88
ata2: SATA max UDMA/133 abar m2048@0xd0000800 port 0xd0000980 irq 88
ata3: SATA max UDMA/133 abar m2048@0xd0000800 port 0xd0000a00 irq 88
ata4: SATA max UDMA/133 abar m2048@0xd0000800 port 0xd0000a80 irq 88
ata5: SATA max UDMA/133 abar m2048@0xd0000800 port 0xd0000b00 irq 88
ata6: SATA max UDMA/133 abar m2048@0xd0000800 port 0xd0000b80 irq 88
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
e1000e 0000:0d:00.0: Disabling ASPM L1
e1000e 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:0d:00.0: setting latency timer to 64
e1000e 0000:0d:00.0: irq 89 for MSI/MSI-X
e1000e 0000:0d:00.0: Disabling ASPM L0s
e1000e 0000:0d:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:30:48:d5:ba:3e
e1000e 0000:0d:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:0d:00.0: eth0: MAC: 2, PHY: 2, PBA No: 0100ff-0ff
e1000e 0000:0f:00.0: Disabling ASPM L1
e1000e 0000:0f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:0f:00.0: setting latency timer to 64
e1000e 0000:0f:00.0: irq 90 for MSI/MSI-X
e1000e 0000:0f:00.0: Disabling ASPM L0s
e1000e 0000:0f:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:d5:ba:3f
e1000e 0000:0f:00.0: eth1: Intel(R) PRO/1000 Network Connection
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-6: WDC WD3200SD-01KNB0, 08.05J08, max UDMA/100
ata1.00: 625142448 sectors, multi 0: LBA48
ata5.00: ATA-7: SAMSUNG HE322HJ, 1AC01111, max UDMA7
ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD3200SD-01K 08.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
ata5.00: configured for UDMA/133
e1000e 0000:0f:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
igb 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
igb 0000:05:00.0: setting latency timer to 64
igb 0000:05:00.0: irq 91 for MSI/MSI-X
igb 0000:05:00.0: irq 92 for MSI/MSI-X
igb 0000:05:00.0: irq 93 for MSI/MSI-X
igb 0000:05:00.0: irq 94 for MSI/MSI-X
igb 0000:05:00.0: irq 95 for MSI/MSI-X
sd 0:0:0:0: [sda] Attached SCSI disk
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:1b:21:8e:d4:2a
igb 0000:05:00.0: eth2: PBA No: e43709-005
igb 0000:05:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
igb 0000:05:00.1: setting latency timer to 64
igb 0000:05:00.1: irq 96 for MSI/MSI-X
igb 0000:05:00.1: irq 97 for MSI/MSI-X
igb 0000:05:00.1: irq 98 for MSI/MSI-X
igb 0000:05:00.1: irq 99 for MSI/MSI-X
igb 0000:05:00.1: irq 100 for MSI/MSI-X
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: CD-224E-R, 1.CA, max UDMA/33
ata4.00: configured for UDMA/33
igb 0000:05:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:1b:21:8e:d4:2b
igb 0000:05:00.1: eth3: PBA No: e43709-005
igb 0000:05:00.1: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0000000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.37.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0000400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
scsi 3:0:0:0: CD-ROM TEAC CD-224E-R 1.CA PQ: 0 ANSI: 5
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.37.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.37.1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.37.1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.37.1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
cdrom: Uniform CD-ROM driver Revision: 3.20
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
sr 3:0:0:0: Attached scsi CD-ROM sr0
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HE322HJ 1AC0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
sd 4:0:0:0: [sdb] Attached SCSI disk
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.37.1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.37.1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.37.1 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
device-mapper: dm-log-userspace: version 1.0.0 loaded
EDAC MC: Ver: 2.1.0 Feb 22 2011
EDAC MC0: Giving out device to 'i3200_edac' 'i3200': DEV 0000:00:00.0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
cpuidle: using governor ladder
cpuidle: using governor menu
ioatdma: Intel(R) QuickData Technology Driver 4.00
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.2
u32 classifier
Performance counters on
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
IPv4 over IPv4 tunneling driver
GRE over IPv4 demultiplexor driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Freeing unused kernel memory: 452k freed
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
bio: create slab <bio-1> at 1
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 402915328
md0: detected capacity change from 0 to 402915328
md0: unknown partition table
md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 319667175424
md1: detected capacity change from 0 to 319667175424
md1: unknown partition table
EXT3-fs (dm-0): recovery required on readonly filesystem
EXT3-fs (dm-0): write access will be enabled during recovery
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-0): recovery complete
EXT3-fs (dm-0): mounted filesystem with ordered data mode
udev[1111]: starting version 164
udev[1131]: renamed network interface eth1 to eth1-eth3
udev[1146]: renamed network interface eth2 to eth2-eth0
udev[1147]: renamed network interface eth3 to eth1
udev[1127]: renamed network interface eth0 to eth2
udev[1131]: renamed network interface eth1-eth3 to eth3
udev[1146]: renamed network interface eth2-eth0 to eth0
EXT3-fs (dm-0): using internal journal
Adding 1949692k swap on /dev/mapper/raid-swap. Priority:-1 extents:1 across:1949692k
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-2): using internal journal
EXT3-fs (dm-2): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-4): using internal journal
EXT3-fs (dm-4): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-3): using internal journal
EXT3-fs (dm-3): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-5): using internal journal
EXT3-fs (dm-5): mounted filesystem with ordered data mode
8021q: adding VLAN 0 to HW filter on device eth0
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
sshd (4913): /proc/4913/oom_adj is deprecated, please use /proc/4913/oom_score_adj instead.