| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1304749117-1989-1-git-send-email-maheshb@google.com>
Date: Fri, 6 May 2011 23:18:37 -0700
From: Mahesh Bandewar <maheshb@...gle.com>
To: Matt Carlson <mcarlson@...adcom.com>,
David Miller <davem@...emloft.net>
Cc: netdev <netdev@...r.kernel.org>, Michael Chan <mchan@...adcom.com>,
Tom Herbert <therbert@...gle.com>,
Michał Mirosław <mirq-linux@...e.qmqm.pl>,
Mahesh Bandewar <maheshb@...gle.com>
Subject: [PATCHv5 2/2] tg3: Allow ethtool to enable/disable loopback.
This patch adds tg3_set_features() to handle loopback mode. Currently the
capability is added for the devices which support internal MAC loopback mode.
So when enabled, it enables internal-MAC loopback.
Signed-off-by: Mahesh Bandewar <maheshb@...gle.com>
---
Changes since v4:
(a) Added TG3_FLAG_LOOPBACK_ENABLED flag to keep loopback state in driver's
private data-structure.
(b) Corrected the loopback implementation by using tp->mac_mode.
(c) Forced Link up when in loopback mode.
Changes since v3:
(a) Corrected the condition (|| => &&) where loopback capability is added.
(b) set_features() always returns 0.
(c) Clear the loopback bit in ndo_open callback to avoid discrepancy.
Changes since v2:
Implemtned Joe Perches's style change.
Changes since v1:
Implemented Matt Carlson's suggestions.
(a) Enable this capability on the devices which are capable of MAC-loopback
mode.
(b) check if the device is running before making changes.
(c) check bits before making changes.
drivers/net/tg3.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++++++-
drivers/net/tg3.h | 1 +
2 files changed, 77 insertions(+), 2 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 7c7c9a8..b7270c2 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -3373,8 +3373,8 @@ relink:
tg3_phy_copper_begin(tp);
tg3_readphy(tp, MII_BMSR, &bmsr);
- if (!tg3_readphy(tp, MII_BMSR, &bmsr) &&
- (bmsr & BMSR_LSTATUS))
+ if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
+ (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
current_link_up = 1;
}
@@ -6309,6 +6309,43 @@ dma_error:
return NETDEV_TX_OK;
}
+static void tg3_set_loopback(struct net_device *dev)
+{
+ struct tg3 *tp = netdev_priv(dev);
+
+ if (tg3_flag(tp, LOOPBACK_ENABLED)) {
+ if (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK)
+ return;
+
+ /*
+ * Clear MAC_MODE_HALF_DUPLEX or you won't get packets back in
+ * loopback mode if Half-Duplex mode was negotiated earlier.
+ */
+ tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
+
+ /* Enable internal MAC loopback mode */
+ tp->mac_mode |= MAC_MODE_PORT_INT_LPBACK;
+ spin_lock_bh(&tp->lock);
+ tw32(MAC_MODE, tp->mac_mode);
+ netif_carrier_on(tp->dev);
+ spin_unlock_bh(&tp->lock);
+ netdev_info(dev, "Internal MAC loopback mode enabled.\n");
+ } else {
+ if (!(tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
+ return;
+
+ /* Disable internal MAC loopback mode */
+ tp->mac_mode &= ~MAC_MODE_PORT_INT_LPBACK;
+ spin_lock_bh(&tp->lock);
+ tw32(MAC_MODE, tp->mac_mode);
+ /* Force link status check */
+ tg3_setup_phy(tp, 1);
+ spin_unlock_bh(&tp->lock);
+ netdev_info(dev, "Internal MAC loopback mode disabled.\n");
+ }
+
+}
+
static u32 tg3_fix_features(struct net_device *dev, u32 features)
{
struct tg3 *tp = netdev_priv(dev);
@@ -6319,6 +6356,24 @@ static u32 tg3_fix_features(struct net_device *dev, u32 features)
return features;
}
+static int tg3_set_features(struct net_device *dev, u32 features)
+{
+ struct tg3 *tp = netdev_priv(dev);
+ u32 changed = dev->features ^ features;
+
+ if (changed & NETIF_F_LOOPBACK) {
+ if (tg3_flag(tp, LOOPBACK_ENABLED))
+ tg3_flag_clear(tp, LOOPBACK_ENABLED);
+ else
+ tg3_flag_set(tp, LOOPBACK_ENABLED);
+
+ if (netif_running(dev))
+ tg3_set_loopback(dev);
+ }
+
+ return 0;
+}
+
static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
int new_mtu)
{
@@ -9485,6 +9540,13 @@ static int tg3_open(struct net_device *dev)
netif_tx_start_all_queues(dev);
+ /*
+ * Reset loopback feature if it was turned on while the device was down
+ * make sure that it's installed properly now.
+ */
+ if (tg3_flag(tp, LOOPBACK_ENABLED))
+ tg3_set_loopback(dev);
+
return 0;
err_out3:
@@ -15029,6 +15091,7 @@ static const struct net_device_ops tg3_netdev_ops = {
.ndo_tx_timeout = tg3_tx_timeout,
.ndo_change_mtu = tg3_change_mtu,
.ndo_fix_features = tg3_fix_features,
+ .ndo_set_features = tg3_set_features,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = tg3_poll_controller,
#endif
@@ -15045,6 +15108,7 @@ static const struct net_device_ops tg3_netdev_ops_dma_bug = {
.ndo_do_ioctl = tg3_ioctl,
.ndo_tx_timeout = tg3_tx_timeout,
.ndo_change_mtu = tg3_change_mtu,
+ .ndo_set_features = tg3_set_features,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = tg3_poll_controller,
#endif
@@ -15242,6 +15306,16 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
dev->features |= hw_features;
dev->vlan_features |= hw_features;
+ /*
+ * Add loopback capability only for a subset of devices that support
+ * MAC-LOOPBACK. Eventually this need to be enhanced to allow INT-PHY
+ * loopback for the remaining devices.
+ */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780 &&
+ !tg3_flag(tp, CPMU_PRESENT))
+ /* Add the loopback capability */
+ dev->hw_features |= NETIF_F_LOOPBACK;
+
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 &&
!tg3_flag(tp, TSO_CAPABLE) &&
!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH)) {
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index ce010cd3..d087ef0 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2891,6 +2891,7 @@ enum TG3_FLAGS {
TG3_FLAG_57765_PLUS,
TG3_FLAG_APE_HAS_NCSI,
TG3_FLAG_5717_PLUS,
+ TG3_FLAG_LOOPBACK_ENABLED,
/* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */
TG3_FLAG_NUMBER_OF_FLAGS, /* Last entry in enum TG3_FLAGS */
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists