| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1306334519-20243-1-git-send-email-andy@greyhouse.net> Date: Wed, 25 May 2011 10:41:59 -0400 From: Andy Gospodarek <andy@...yhouse.net> To: netdev@...r.kernel.org Cc: Weiping Pan <panweiping3@...il.com> Subject: [PATCH net-next-2.6] bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@...il.com>. Signed-off-by: Andy Gospodarek <andy@...yhouse.net> CC: Weiping Pan <panweiping3@...il.com> --- drivers/net/bonding/bond_main.c | 34 ++++++++++++++++++++++------------ 1 files changed, 22 insertions(+), 12 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 088fd84..31a61d3 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -113,9 +113,11 @@ MODULE_PARM_DESC(max_bonds, "Max number of bonded devices"); module_param(tx_queues, int, 0); MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)"); module_param_named(num_grat_arp, num_peer_notif, int, 0644); -MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on failover event (alias of num_unsol_na)"); +MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on " + "failover event (alias of num_unsol_na)"); module_param_named(num_unsol_na, num_peer_notif, int, 0644); -MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on failover event (alias of num_grat_arp)"); +MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on " + "failover event (alias of num_grat_arp)"); module_param(miimon, int, 0); MODULE_PARM_DESC(miimon, "Link check interval in milliseconds"); module_param(updelay, int, 0); @@ -127,7 +129,7 @@ module_param(use_carrier, int, 0); MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; " "0 for off, 1 for on (default)"); module_param(mode, charp, 0); -MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, " +MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, " "1 for active-backup, 2 for balance-xor, " "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, " "6 for balance-alb"); @@ -142,27 +144,35 @@ MODULE_PARM_DESC(primary_reselect, "Reselect primary slave " "2 for only on active slave " "failure"); module_param(lacp_rate, charp, 0); -MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner " - "(slow/fast)"); +MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; " + "0 for slow, 1 for fast"); module_param(ad_select, charp, 0); -MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2)"); +MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic; " + "0 for stable (default), 1 for bandwidth, " + "2 for count"); module_param(xmit_hash_policy, charp, 0); -MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)" - ", 1 for layer 3+4"); +MODULE_PARM_DESC(xmit_hash_policy, "balance-xor and 802.3ad hashing method; " + "0 for layer 2 (default), 1 for layer 3+4, " + "2 for layer 2+3"); module_param(arp_interval, int, 0); MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds"); module_param_array(arp_ip_target, charp, NULL, 0); MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form"); module_param(arp_validate, charp, 0); -MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes: none (default), active, backup or all"); +MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; " + "0 for none (default), 1 for active, " + "2 for backup, 3 for all"); module_param(fail_over_mac, charp, 0); -MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to the same MAC. none (default), active or follow"); +MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to " + "the same MAC; 0 for none (default), " + "1 for active, 2 for follow"); module_param(all_slaves_active, int, 0); MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface" - "by setting active flag for all slaves. " + "by setting active flag for all slaves; " "0 for never (default), 1 for always."); module_param(resend_igmp, int, 0); -MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on link failure"); +MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on " + "link failure"); /*----------------------------- Global variables ----------------------------*/ -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists