Message-Id: <201105271119.41323.arnd@arndb.de>
Date:	Fri, 27 May 2011 11:19:41 +0200
From:	Arnd Bergmann <arnd@...db.de>
To:	GuanXuetao <gxt@...c.pku.edu.cn>
Cc:	linux-kernel@...r.kernel.org, linux-arch@...r.kernel.org,
	greg@...ah.com, netdev@...r.kernel.org
Subject: Re: [PATCH 2/6] unicore32: add pkunity-v3 mac/net driver (umal)

On Thursday 26 May 2011, GuanXuetao wrote:
> From: Guan Xuetao <gxt@...c.pku.edu.cn>
> 
> Signed-off-by: Guan Xuetao <gxt@...c.pku.edu.cn>
> ---
>  MAINTAINERS                            |    1 +
>  arch/unicore32/configs/debug_defconfig |    2 +-
>  drivers/net/Kconfig                    |    5 +
>  drivers/net/Makefile                   |    1 +
>  drivers/net/mac-puv3.c                 | 1942 ++++++++++++++++++++++++++++++++
>  5 files changed, 1950 insertions(+), 1 deletions(-)
>  create mode 100644 drivers/net/mac-puv3.c

I also have a few comments after looking through the driver.

> +
> +/**********************************************************************
> + *  Globals
> + ********************************************************************* */

Regular commenting style would be

/*
 * Globals
 */

> +/**********************************************************************
> + *  Prototypes
> + ********************************************************************* */
> +static int umal_mii_reset(struct mii_bus *bus);
> +static int umal_mii_read(struct mii_bus *bus, int phyaddr, int regidx);
> +static int umal_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
> +		u16 val);
> +static int umal_mii_probe(struct net_device *dev);
> +
> +static void umaldma_initctx(struct umaldma *d, struct umal_softc *s,
> +		int rxtx, int maxdescr);
> +static void umaldma_uninitctx(struct umaldma *d);
> +static void umaldma_channel_start(struct umaldma *d, int rxtx);
> +static void umaldma_channel_stop(struct umaldma *d);
> +static int umaldma_add_rcvbuffer(struct umal_softc *sc, struct umaldma *d,
> +		struct sk_buff *m);
> +static int umaldma_add_txbuffer(struct umaldma *d, struct sk_buff *m);
> +static void umaldma_emptyring(struct umaldma *d);
> +static void umaldma_fillring(struct umal_softc *sc, struct umaldma *d);
> +static int umaldma_rx_process(struct umal_softc *sc, struct umaldma *d,
> +		int work_to_do, int poll);
> +static void umaldma_tx_process(struct umal_softc *sc, struct umaldma *d,
> +		int poll);
> +
> +static int umal_initctx(struct umal_softc *s);
> +static void umal_uninitctx(struct umal_softc *s);
> +static void umal_channel_start(struct umal_softc *s);
> +static void umal_channel_stop(struct umal_softc *s);
> +static enum umal_state umal_set_channel_state(struct umal_softc *,
> +		enum umal_state);
> +
> +static int umal_init(struct platform_device *pldev, long long base);
> +static int umal_open(struct net_device *dev);
> +static int umal_close(struct net_device *dev);
> +static int umal_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
> +static irqreturn_t umal_intr(int irq, void *dev_instance);
> +static void umal_clr_intr(struct net_device *dev);
> +static int umal_start_tx(struct sk_buff *skb, struct net_device *dev);
> +static void umal_tx_timeout(struct net_device *dev);
> +static void umal_set_rx_mode(struct net_device *dev);
> +static void umal_promiscuous_mode(struct umal_softc *sc, int onoff);
> +static void umal_setmulti(struct umal_softc *sc);
> +static int umal_set_speed(struct umal_softc *s, enum umal_speed speed);
> +static int umal_set_duplex(struct umal_softc *s, enum umal_duplex duplex,
> +		enum umal_fc fc);
> +static int umal_change_mtu(struct net_device *_dev, int new_mtu);
> +static void umal_miipoll(struct net_device *dev);

Best avoid all these prototypes. Instead, reorder the functions in the
driver so you don't need them. That is the order in which reviewers expect
them.

> +/**********************************************************************
> + *  UMAL_MII_RESET(bus)
> + *
> + *  Reset MII bus.
> + *
> + *  Input parameters:
> + *	   bus     - MDIO bus handle
> + *
> + *  Return value:
> + *	   0 if ok
> + ********************************************************************* */

For extended function documentation, use the kerneldoc style, e.g.

/**
 * umal_mii_reset - reset MII bus
 *
 * @bus: MDIO bus handle
 *
 * Returns 0
 */

See also Documentation/kernel-doc-nano-HOWTO.txt

> +/**********************************************************************
> + *  UMALDMA_RX_PROCESS(sc,d,work_to_do,poll)
> + *
> + *  Process "completed" receive buffers on the specified DMA channel.
> + *
> + *  Input parameters:
> + *            sc - softc structure
> + *	       d - DMA channel context
> + *    work_to_do - no. of packets to process before enabling interrupt
> + *                 again (for NAPI)
> + *          poll - 1: using polling (for NAPI)
> + *
> + *  Return value:
> + *	   nothing
> + ********************************************************************* */
> +static int umaldma_rx_process(struct umal_softc *sc, struct umaldma *d,
> +		int work_to_do, int poll)

It seems that you tried to convert the driver to NAPI but did not succeed,
as this function is only called from the interrupt handler directly.

There is usually a significant performance win from using NAPI, so you
should better try again. If you had problems doing that, please ask
on netdev.

> +
> +#ifdef CONFIG_CMDLINE_FORCE
> +	eaddr[0] = 0x00;
> +	eaddr[1] = 0x25;
> +	eaddr[2] = 0x9b;
> +	eaddr[3] = 0xff;
> +	eaddr[4] = 0x00;
> +	eaddr[5] = 0x00;
> +#endif
> +
> +	for (i = 0; i < 6; i++)
> +		dev->dev_addr[i] = eaddr[i];

You can use random_ether_addr() to generate a working unique MAC address
if the hardware does not provide one.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists