lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Sat, 28 May 2011 12:14:37 -0700
From:	Shirley Ma <mashirle@...ibm.com>
To:	David Miller <davem@...emloft.net>, mst@...hat.com,
	Eric Dumazet <eric.dumazet@...il.com>,
	Avi Kivity <avi@...hat.com>, Arnd Bergmann <arnd@...db.de>
Cc:	netdev@...r.kernel.org, kvm@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH V7 0/4 net-next] macvtap/vhost TX zero-copy support

This patchset add supports for TX zero-copy between guest and host
kernel through vhost. It significantly reduces CPU utilization on the
local host on which the guest is located (It reduced about 50% CPU usage
for single stream test on the host, while 4K message size BW has
increased about 50%). The patchset is based on previous submission and
comments from the community regarding when/how to handle guest kernel
buffers to be released. This is the simplest approach I can think of
after comparing with several other solutions.

This patchset has integrated V3 review comments from community: 

1. Add more comments on how to use device ZEROCOPY flag;
2. Change device ZEROCOPY to available bit 31
3. Fix skb header linear allocation when virtio_net GSO is not enabled

It has integrated V4 review comments from MST and Sridhar:
1. In vhost, using socket poll wake up for outstanding DMAs
2. Add detailed comments for vhost_zerocopy_signal_used call
3. Add sleep in vhost shutting down instead of busy-wait for outstanding
   DMAs.
4. Copy small packets, don't do zero-copy callback in mavtap, mark it's
   DMA done in vhost
5. change zerocopy to bool in macvtap.

It has integrated V5 review comments from MST and 
Michał Mirosław <mirqus@...il.com>
1. Prevent userspace apps from holding skb userspace buffers by copying
userspace buffers to kernel in skb_clone, skb_copy, pskb_copy,
pskb_expand_head.
2. It is also used HIGHDMA, SG feature bits to enable ZEROCOPY to remove
the dependency of a new feature bit, we can add it later when new
feature bit is available.

It has integrated V6 review comments from Eric Dumazet.
1. Moving ubuf_info object from skb to caller, just use one pointer in
skb_share_info to point ubuf_info object.

2. Change the zero-copy size from 256 bytes to PAGE_SIZE (4K) because of
the small message size performance issue.

3. During vhost shutting down, release outstanding userspace buffers w/o
waiting for lower device DMAs done if any. Do we really care about the
possible wrong data being sent on the wire during shutting down?

This patchset includes:
1/4: Add a new sock zero-copy flag, SOCK_ZEROCOPY;

2/4: Add a new struct skb_ubuf_info in skb_share_info for userspace
buffers release callback when lower device DMA has done for that skb,
which is the last reference count gone; Or whenever skb_clone, skb_copy,
pskb_copy, pskb_expand_head get call from tcpdump, filtering, these
userspace buffers will be copied into kernel ... we don't want userspace
apps to hold userspace buffers too long.

3/4: Add vhost zero-copy callback in vhost when skb last refcnt is gone;
add vhost_zerocopy_signal_used to notify guest to release TX skb
buffers.

4/4: Add macvtap zero-copy in lower device when sending packet is
greater than PAGE_SIZE.

The patchset is built against linux-2.6.39. It has passed
netperf/netserver multiple streams stress test, tcpdump
suspended test, dynamically SG change test.

Single TCP_STREAM 120 secs test results 2.6.39-rc3 over ixgbe 10Gb NIC
results:

Message BW(Gb/s)qemu-kvm (NumCPU)vhost-net(NumCPU) PerfTop irq/s
4K      7408.57         92.1%           22.6%           1229
4K(Orig)4913.17         118.1%          84.1%           2086    
8K      9129.90         89.3%           23.3%           1141
8K(Orig)7094.55         115.9%          84.7%           2157
16K     9178.81         89.1%           23.3%           1139
16K(Orig)8927.1         118.7%          83.4%           2262
64K     9171.43         88.4%           24.9%           1253
64K(Orig)9085.85        115.9%          82.4%           2229

For message size less or equal than 2K, there is a known KVM guest TX
overrun issue. With this zero-copy patch, the issue becomes more severe,
guest io_exits has tripled than before, so the performance is not good.
Once the TX overrun problem has been addressed, I will retest the small
message size performance.

 drivers/net/macvtap.c  |  131
++++++++++++++++++++++++++++++++++++++++++++----
 drivers/vhost/net.c    |   45 ++++++++++++++++-
 drivers/vhost/vhost.c  |   51 +++++++++++++++++++
 drivers/vhost/vhost.h  |   15 ++++++
 include/linux/skbuff.h |   25 +++++++++
 include/net/sock.h     |    1 +
 net/core/skbuff.c      |   83 ++++++++++++++++++++++++++++++-
 7 files changed, 338 insertions(+), 13 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ