lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1307449995-9458-5-git-send-email-jeffrey.t.kirsher@intel.com>
Date:	Tue,  7 Jun 2011 05:32:39 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Bruce Allan <bruce.w.allan@...el.com>, netdev@...r.kernel.org,
	gospo@...hat.com, Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 04/40] e1000e: do not schedule the Tx queue until ready

From: Bruce Allan <bruce.w.allan@...el.com>

Start the Tx queue when the interface is brought up in e1000e_up() but do
not schedule the queue until link is up as detected in the watchdog task
which sets netif_carrier_on.

Also flush the descriptors and clean the Tx and Rx rings before resetting
the hardware when bringing the interface down otherwise there is a small
window where the watchdog task can be triggered with netif_carrier_off
and the Tx ring not yet empty which causes an additional and unnecessary
reset.

Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/e1000e/netdev.c |   11 +++++------
 1 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index f5c1469..da3fff6 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3346,7 +3346,7 @@ int e1000e_up(struct e1000_adapter *adapter)
 		e1000_configure_msix(adapter);
 	e1000_irq_enable(adapter);
 
-	netif_wake_queue(adapter->netdev);
+	netif_start_queue(adapter->netdev);
 
 	/* fire a link change interrupt to start the watchdog */
 	if (adapter->msix_entries)
@@ -3413,17 +3413,16 @@ void e1000e_down(struct e1000_adapter *adapter)
 	e1000e_update_stats(adapter);
 	spin_unlock(&adapter->stats64_lock);
 
+	e1000e_flush_descriptors(adapter);
+	e1000_clean_tx_ring(adapter);
+	e1000_clean_rx_ring(adapter);
+
 	adapter->link_speed = 0;
 	adapter->link_duplex = 0;
 
 	if (!pci_channel_offline(adapter->pdev))
 		e1000e_reset(adapter);
 
-	e1000e_flush_descriptors(adapter);
-
-	e1000_clean_tx_ring(adapter);
-	e1000_clean_rx_ring(adapter);
-
 	/*
 	 * TODO: for power management, we could drop the link and
 	 * pci_disable_device here.
-- 
1.7.5.2

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ