| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110620193859.GA19114@myri.com>
Date: Mon, 20 Jun 2011 14:39:00 -0500
From: Jon Mason <jon.mason@...i.com>
To: David Miller <davem@...emloft.net>
Cc: netdev <netdev@...r.kernel.org>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
Andrew Gallatin <gallatin@...i.com>
Subject: [PATCH] myri_sbus: remove driver
Remove the myri_sbus driver. Why?
* There is no possibility of ethernet mode on this adapter, so it's
Myrinet only.
* It won't inter-op with modern versions of Myrinet, and thus can only
work with legacy adapters.
* There are no in-kernel Linux drivers for the PCI version of this
adapter, so it only can work on ~15 year old Sun hardware.
It's long in the tooth, let's take it to the knackers.
Signed-off-by: Jon Mason <mason@...i.com>
---
drivers/net/Kconfig | 9 -
drivers/net/Makefile | 1 -
drivers/net/myri_sbus.c | 1187 -----------------------------------------------
drivers/net/myri_sbus.h | 311 -------------
4 files changed, 0 insertions(+), 1508 deletions(-)
delete mode 100644 drivers/net/myri_sbus.c
delete mode 100644 drivers/net/myri_sbus.h
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 399cf4b..f5919c2 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2196,15 +2196,6 @@ config IGBVF
source "drivers/net/ixp2000/Kconfig"
-config MYRI_SBUS
- tristate "MyriCOM Gigabit Ethernet support"
- depends on SBUS
- help
- This driver supports MyriCOM Sbus gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called myri_sbus. This is recommended.
-
config NS83820
tristate "National Semiconductor DP83820 support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 8006841..86f6c8d 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -59,7 +59,6 @@ obj-$(CONFIG_HAPPYMEAL) += sunhme.o
obj-$(CONFIG_SUNLANCE) += sunlance.o
obj-$(CONFIG_SUNQE) += sunqe.o
obj-$(CONFIG_SUNBMAC) += sunbmac.o
-obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o
obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
obj-$(CONFIG_CASSINI) += cassini.o
obj-$(CONFIG_SUNVNET) += sunvnet.o
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
deleted file mode 100644
index 53aeea4..0000000
--- a/drivers/net/myri_sbus.c
+++ /dev/null
@@ -1,1187 +0,0 @@
-/* myri_sbus.c: MyriCOM MyriNET SBUS card driver.
- *
- * Copyright (C) 1996, 1999, 2006, 2008 David S. Miller (davem@...emloft.net)
- */
-
-static char version[] =
- "myri_sbus.c:v2.0 June 23, 2006 David S. Miller (davem@...emloft.net)\n";
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-#include <linux/dma-mapping.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/firmware.h>
-#include <linux/gfp.h>
-
-#include <net/dst.h>
-#include <net/arp.h>
-#include <net/sock.h>
-#include <net/ipv6.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/byteorder.h>
-#include <asm/idprom.h>
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-#include <asm/auxio.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-
-#include "myri_sbus.h"
-
-/* #define DEBUG_DETECT */
-/* #define DEBUG_IRQ */
-/* #define DEBUG_TRANSMIT */
-/* #define DEBUG_RECEIVE */
-/* #define DEBUG_HEADER */
-
-#ifdef DEBUG_DETECT
-#define DET(x) printk x
-#else
-#define DET(x)
-#endif
-
-#ifdef DEBUG_IRQ
-#define DIRQ(x) printk x
-#else
-#define DIRQ(x)
-#endif
-
-#ifdef DEBUG_TRANSMIT
-#define DTX(x) printk x
-#else
-#define DTX(x)
-#endif
-
-#ifdef DEBUG_RECEIVE
-#define DRX(x) printk x
-#else
-#define DRX(x)
-#endif
-
-#ifdef DEBUG_HEADER
-#define DHDR(x) printk x
-#else
-#define DHDR(x)
-#endif
-
-/* Firmware name */
-#define FWNAME "myricom/lanai.bin"
-
-static void myri_reset_off(void __iomem *lp, void __iomem *cregs)
-{
- /* Clear IRQ mask. */
- sbus_writel(0, lp + LANAI_EIMASK);
-
- /* Turn RESET function off. */
- sbus_writel(CONTROL_ROFF, cregs + MYRICTRL_CTRL);
-}
-
-static void myri_reset_on(void __iomem *cregs)
-{
- /* Enable RESET function. */
- sbus_writel(CONTROL_RON, cregs + MYRICTRL_CTRL);
-
- /* Disable IRQ's. */
- sbus_writel(CONTROL_DIRQ, cregs + MYRICTRL_CTRL);
-}
-
-static void myri_disable_irq(void __iomem *lp, void __iomem *cregs)
-{
- sbus_writel(CONTROL_DIRQ, cregs + MYRICTRL_CTRL);
- sbus_writel(0, lp + LANAI_EIMASK);
- sbus_writel(ISTAT_HOST, lp + LANAI_ISTAT);
-}
-
-static void myri_enable_irq(void __iomem *lp, void __iomem *cregs)
-{
- sbus_writel(CONTROL_EIRQ, cregs + MYRICTRL_CTRL);
- sbus_writel(ISTAT_HOST, lp + LANAI_EIMASK);
-}
-
-static inline void bang_the_chip(struct myri_eth *mp)
-{
- struct myri_shmem __iomem *shmem = mp->shmem;
- void __iomem *cregs = mp->cregs;
-
- sbus_writel(1, &shmem->send);
- sbus_writel(CONTROL_WON, cregs + MYRICTRL_CTRL);
-}
-
-static int myri_do_handshake(struct myri_eth *mp)
-{
- struct myri_shmem __iomem *shmem = mp->shmem;
- void __iomem *cregs = mp->cregs;
- struct myri_channel __iomem *chan = &shmem->channel;
- int tick = 0;
-
- DET(("myri_do_handshake: "));
- if (sbus_readl(&chan->state) == STATE_READY) {
- DET(("Already STATE_READY, failed.\n"));
- return -1; /* We're hosed... */
- }
-
- myri_disable_irq(mp->lregs, cregs);
-
- while (tick++ < 25) {
- u32 softstate;
-
- /* Wake it up. */
- DET(("shakedown, CONTROL_WON, "));
- sbus_writel(1, &shmem->shakedown);
- sbus_writel(CONTROL_WON, cregs + MYRICTRL_CTRL);
-
- softstate = sbus_readl(&chan->state);
- DET(("chanstate[%08x] ", softstate));
- if (softstate == STATE_READY) {
- DET(("wakeup successful, "));
- break;
- }
-
- if (softstate != STATE_WFN) {
- DET(("not WFN setting that, "));
- sbus_writel(STATE_WFN, &chan->state);
- }
-
- udelay(20);
- }
-
- myri_enable_irq(mp->lregs, cregs);
-
- if (tick > 25) {
- DET(("25 ticks we lose, failure.\n"));
- return -1;
- }
- DET(("success\n"));
- return 0;
-}
-
-static int __devinit myri_load_lanai(struct myri_eth *mp)
-{
- const struct firmware *fw;
- struct net_device *dev = mp->dev;
- struct myri_shmem __iomem *shmem = mp->shmem;
- void __iomem *rptr;
- int i, lanai4_data_size;
-
- myri_disable_irq(mp->lregs, mp->cregs);
- myri_reset_on(mp->cregs);
-
- rptr = mp->lanai;
- for (i = 0; i < mp->eeprom.ramsz; i++)
- sbus_writeb(0, rptr + i);
-
- if (mp->eeprom.cpuvers >= CPUVERS_3_0)
- sbus_writel(mp->eeprom.cval, mp->lregs + LANAI_CVAL);
-
- i = request_firmware(&fw, FWNAME, &mp->myri_op->dev);
- if (i) {
- printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
- FWNAME, i);
- return i;
- }
- if (fw->size < 2) {
- printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
- fw->size, FWNAME);
- release_firmware(fw);
- return -EINVAL;
- }
- lanai4_data_size = fw->data[0] << 8 | fw->data[1];
-
- /* Load executable code. */
- for (i = 2; i < fw->size; i++)
- sbus_writeb(fw->data[i], rptr++);
-
- /* Load data segment. */
- for (i = 0; i < lanai4_data_size; i++)
- sbus_writeb(0, rptr++);
-
- /* Set device address. */
- sbus_writeb(0, &shmem->addr[0]);
- sbus_writeb(0, &shmem->addr[1]);
- for (i = 0; i < 6; i++)
- sbus_writeb(dev->dev_addr[i],
- &shmem->addr[i + 2]);
-
- /* Set SBUS bursts and interrupt mask. */
- sbus_writel(((mp->myri_bursts & 0xf8) >> 3), &shmem->burst);
- sbus_writel(SHMEM_IMASK_RX, &shmem->imask);
-
- /* Release the LANAI. */
- myri_disable_irq(mp->lregs, mp->cregs);
- myri_reset_off(mp->lregs, mp->cregs);
- myri_disable_irq(mp->lregs, mp->cregs);
-
- /* Wait for the reset to complete. */
- for (i = 0; i < 5000; i++) {
- if (sbus_readl(&shmem->channel.state) != STATE_READY)
- break;
- else
- udelay(10);
- }
-
- if (i == 5000)
- printk(KERN_ERR "myricom: Chip would not reset after firmware load.\n");
-
- i = myri_do_handshake(mp);
- if (i)
- printk(KERN_ERR "myricom: Handshake with LANAI failed.\n");
-
- if (mp->eeprom.cpuvers == CPUVERS_4_0)
- sbus_writel(0, mp->lregs + LANAI_VERS);
-
- release_firmware(fw);
- return i;
-}
-
-static void myri_clean_rings(struct myri_eth *mp)
-{
- struct sendq __iomem *sq = mp->sq;
- struct recvq __iomem *rq = mp->rq;
- int i;
-
- sbus_writel(0, &rq->tail);
- sbus_writel(0, &rq->head);
- for (i = 0; i < (RX_RING_SIZE+1); i++) {
- if (mp->rx_skbs[i] != NULL) {
- struct myri_rxd __iomem *rxd = &rq->myri_rxd[i];
- u32 dma_addr;
-
- dma_addr = sbus_readl(&rxd->myri_scatters[0].addr);
- dma_unmap_single(&mp->myri_op->dev, dma_addr,
- RX_ALLOC_SIZE, DMA_FROM_DEVICE);
- dev_kfree_skb(mp->rx_skbs[i]);
- mp->rx_skbs[i] = NULL;
- }
- }
-
- mp->tx_old = 0;
- sbus_writel(0, &sq->tail);
- sbus_writel(0, &sq->head);
- for (i = 0; i < TX_RING_SIZE; i++) {
- if (mp->tx_skbs[i] != NULL) {
- struct sk_buff *skb = mp->tx_skbs[i];
- struct myri_txd __iomem *txd = &sq->myri_txd[i];
- u32 dma_addr;
-
- dma_addr = sbus_readl(&txd->myri_gathers[0].addr);
- dma_unmap_single(&mp->myri_op->dev, dma_addr,
- (skb->len + 3) & ~3,
- DMA_TO_DEVICE);
- dev_kfree_skb(mp->tx_skbs[i]);
- mp->tx_skbs[i] = NULL;
- }
- }
-}
-
-static void myri_init_rings(struct myri_eth *mp, int from_irq)
-{
- struct recvq __iomem *rq = mp->rq;
- struct myri_rxd __iomem *rxd = &rq->myri_rxd[0];
- struct net_device *dev = mp->dev;
- gfp_t gfp_flags = GFP_KERNEL;
- int i;
-
- if (from_irq || in_interrupt())
- gfp_flags = GFP_ATOMIC;
-
- myri_clean_rings(mp);
- for (i = 0; i < RX_RING_SIZE; i++) {
- struct sk_buff *skb = myri_alloc_skb(RX_ALLOC_SIZE, gfp_flags);
- u32 dma_addr;
-
- if (!skb)
- continue;
- mp->rx_skbs[i] = skb;
- skb->dev = dev;
- skb_put(skb, RX_ALLOC_SIZE);
-
- dma_addr = dma_map_single(&mp->myri_op->dev,
- skb->data, RX_ALLOC_SIZE,
- DMA_FROM_DEVICE);
- sbus_writel(dma_addr, &rxd[i].myri_scatters[0].addr);
- sbus_writel(RX_ALLOC_SIZE, &rxd[i].myri_scatters[0].len);
- sbus_writel(i, &rxd[i].ctx);
- sbus_writel(1, &rxd[i].num_sg);
- }
- sbus_writel(0, &rq->head);
- sbus_writel(RX_RING_SIZE, &rq->tail);
-}
-
-static int myri_init(struct myri_eth *mp, int from_irq)
-{
- myri_init_rings(mp, from_irq);
- return 0;
-}
-
-static void myri_is_not_so_happy(struct myri_eth *mp)
-{
-}
-
-#ifdef DEBUG_HEADER
-static void dump_ehdr(struct ethhdr *ehdr)
-{
- printk("ehdr[h_dst(%pM)"
- "h_source(%pM)"
- "h_proto(%04x)]\n",
- ehdr->h_dest, ehdr->h_source, ehdr->h_proto);
-}
-
-static void dump_ehdr_and_myripad(unsigned char *stuff)
-{
- struct ethhdr *ehdr = (struct ethhdr *) (stuff + 2);
-
- printk("pad[%02x:%02x]", stuff[0], stuff[1]);
- dump_ehdr(ehdr);
-}
-#endif
-
-static void myri_tx(struct myri_eth *mp, struct net_device *dev)
-{
- struct sendq __iomem *sq= mp->sq;
- int entry = mp->tx_old;
- int limit = sbus_readl(&sq->head);
-
- DTX(("entry[%d] limit[%d] ", entry, limit));
- if (entry == limit)
- return;
- while (entry != limit) {
- struct sk_buff *skb = mp->tx_skbs[entry];
- u32 dma_addr;
-
- DTX(("SKB[%d] ", entry));
- dma_addr = sbus_readl(&sq->myri_txd[entry].myri_gathers[0].addr);
- dma_unmap_single(&mp->myri_op->dev, dma_addr,
- skb->len, DMA_TO_DEVICE);
- dev_kfree_skb(skb);
- mp->tx_skbs[entry] = NULL;
- dev->stats.tx_packets++;
- entry = NEXT_TX(entry);
- }
- mp->tx_old = entry;
-}
-
-/* Determine the packet's protocol ID. The rule here is that we
- * assume 802.3 if the type field is short enough to be a length.
- * This is normal practice and works for any 'now in use' protocol.
- */
-static __be16 myri_type_trans(struct sk_buff *skb, struct net_device *dev)
-{
- struct ethhdr *eth;
- unsigned char *rawp;
-
- skb_set_mac_header(skb, MYRI_PAD_LEN);
- skb_pull(skb, dev->hard_header_len);
- eth = eth_hdr(skb);
-
-#ifdef DEBUG_HEADER
- DHDR(("myri_type_trans: "));
- dump_ehdr(eth);
-#endif
- if (*eth->h_dest & 1) {
- if (memcmp(eth->h_dest, dev->broadcast, ETH_ALEN)==0)
- skb->pkt_type = PACKET_BROADCAST;
- else
- skb->pkt_type = PACKET_MULTICAST;
- } else if (dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) {
- if (memcmp(eth->h_dest, dev->dev_addr, ETH_ALEN))
- skb->pkt_type = PACKET_OTHERHOST;
- }
-
- if (ntohs(eth->h_proto) >= 1536)
- return eth->h_proto;
-
- rawp = skb->data;
-
- /* This is a magic hack to spot IPX packets. Older Novell breaks
- * the protocol design and runs IPX over 802.3 without an 802.2 LLC
- * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
- * won't work for fault tolerant netware but does for the rest.
- */
- if (*(unsigned short *)rawp == 0xFFFF)
- return htons(ETH_P_802_3);
-
- /* Real 802.2 LLC */
- return htons(ETH_P_802_2);
-}
-
-static void myri_rx(struct myri_eth *mp, struct net_device *dev)
-{
- struct recvq __iomem *rq = mp->rq;
- struct recvq __iomem *rqa = mp->rqack;
- int entry = sbus_readl(&rqa->head);
- int limit = sbus_readl(&rqa->tail);
- int drops;
-
- DRX(("entry[%d] limit[%d] ", entry, limit));
- if (entry == limit)
- return;
- drops = 0;
- DRX(("\n"));
- while (entry != limit) {
- struct myri_rxd __iomem *rxdack = &rqa->myri_rxd[entry];
- u32 csum = sbus_readl(&rxdack->csum);
- int len = sbus_readl(&rxdack->myri_scatters[0].len);
- int index = sbus_readl(&rxdack->ctx);
- struct myri_rxd __iomem *rxd = &rq->myri_rxd[sbus_readl(&rq->tail)];
- struct sk_buff *skb = mp->rx_skbs[index];
-
- /* Ack it. */
- sbus_writel(NEXT_RX(entry), &rqa->head);
-
- /* Check for errors. */
- DRX(("rxd[%d]: %p len[%d] csum[%08x] ", entry, rxd, len, csum));
- dma_sync_single_for_cpu(&mp->myri_op->dev,
- sbus_readl(&rxd->myri_scatters[0].addr),
- RX_ALLOC_SIZE, DMA_FROM_DEVICE);
- if (len < (ETH_HLEN + MYRI_PAD_LEN) || (skb->data[0] != MYRI_PAD_LEN)) {
- DRX(("ERROR["));
- dev->stats.rx_errors++;
- if (len < (ETH_HLEN + MYRI_PAD_LEN)) {
- DRX(("BAD_LENGTH] "));
- dev->stats.rx_length_errors++;
- } else {
- DRX(("NO_PADDING] "));
- dev->stats.rx_frame_errors++;
- }
-
- /* Return it to the LANAI. */
- drop_it:
- drops++;
- DRX(("DROP "));
- dev->stats.rx_dropped++;
- dma_sync_single_for_device(&mp->myri_op->dev,
- sbus_readl(&rxd->myri_scatters[0].addr),
- RX_ALLOC_SIZE,
- DMA_FROM_DEVICE);
- sbus_writel(RX_ALLOC_SIZE, &rxd->myri_scatters[0].len);
- sbus_writel(index, &rxd->ctx);
- sbus_writel(1, &rxd->num_sg);
- sbus_writel(NEXT_RX(sbus_readl(&rq->tail)), &rq->tail);
- goto next;
- }
-
- DRX(("len[%d] ", len));
- if (len > RX_COPY_THRESHOLD) {
- struct sk_buff *new_skb;
- u32 dma_addr;
-
- DRX(("BIGBUFF "));
- new_skb = myri_alloc_skb(RX_ALLOC_SIZE, GFP_ATOMIC);
- if (new_skb == NULL) {
- DRX(("skb_alloc(FAILED) "));
- goto drop_it;
- }
- dma_unmap_single(&mp->myri_op->dev,
- sbus_readl(&rxd->myri_scatters[0].addr),
- RX_ALLOC_SIZE,
- DMA_FROM_DEVICE);
- mp->rx_skbs[index] = new_skb;
- new_skb->dev = dev;
- skb_put(new_skb, RX_ALLOC_SIZE);
- dma_addr = dma_map_single(&mp->myri_op->dev,
- new_skb->data,
- RX_ALLOC_SIZE,
- DMA_FROM_DEVICE);
- sbus_writel(dma_addr, &rxd->myri_scatters[0].addr);
- sbus_writel(RX_ALLOC_SIZE, &rxd->myri_scatters[0].len);
- sbus_writel(index, &rxd->ctx);
- sbus_writel(1, &rxd->num_sg);
- sbus_writel(NEXT_RX(sbus_readl(&rq->tail)), &rq->tail);
-
- /* Trim the original skb for the netif. */
- DRX(("trim(%d) ", len));
- skb_trim(skb, len);
- } else {
- struct sk_buff *copy_skb = dev_alloc_skb(len);
-
- DRX(("SMALLBUFF "));
- if (copy_skb == NULL) {
- DRX(("dev_alloc_skb(FAILED) "));
- goto drop_it;
- }
- /* DMA sync already done above. */
- copy_skb->dev = dev;
- DRX(("resv_and_put "));
- skb_put(copy_skb, len);
- skb_copy_from_linear_data(skb, copy_skb->data, len);
-
- /* Reuse original ring buffer. */
- DRX(("reuse "));
- dma_sync_single_for_device(&mp->myri_op->dev,
- sbus_readl(&rxd->myri_scatters[0].addr),
- RX_ALLOC_SIZE,
- DMA_FROM_DEVICE);
- sbus_writel(RX_ALLOC_SIZE, &rxd->myri_scatters[0].len);
- sbus_writel(index, &rxd->ctx);
- sbus_writel(1, &rxd->num_sg);
- sbus_writel(NEXT_RX(sbus_readl(&rq->tail)), &rq->tail);
-
- skb = copy_skb;
- }
-
- /* Just like the happy meal we get checksums from this card. */
- skb->csum = csum;
- skb->ip_summed = CHECKSUM_UNNECESSARY; /* XXX */
-
- skb->protocol = myri_type_trans(skb, dev);
- DRX(("prot[%04x] netif_rx ", skb->protocol));
- netif_rx(skb);
-
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += len;
- next:
- DRX(("NEXT\n"));
- entry = NEXT_RX(entry);
- }
-}
-
-static irqreturn_t myri_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *) dev_id;
- struct myri_eth *mp = netdev_priv(dev);
- void __iomem *lregs = mp->lregs;
- struct myri_channel __iomem *chan = &mp->shmem->channel;
- unsigned long flags;
- u32 status;
- int handled = 0;
-
- spin_lock_irqsave(&mp->irq_lock, flags);
-
- status = sbus_readl(lregs + LANAI_ISTAT);
- DIRQ(("myri_interrupt: status[%08x] ", status));
- if (status & ISTAT_HOST) {
- u32 softstate;
-
- handled = 1;
- DIRQ(("IRQ_DISAB "));
- myri_disable_irq(lregs, mp->cregs);
- softstate = sbus_readl(&chan->state);
- DIRQ(("state[%08x] ", softstate));
- if (softstate != STATE_READY) {
- DIRQ(("myri_not_so_happy "));
- myri_is_not_so_happy(mp);
- }
- DIRQ(("\nmyri_rx: "));
- myri_rx(mp, dev);
- DIRQ(("\nistat=ISTAT_HOST "));
- sbus_writel(ISTAT_HOST, lregs + LANAI_ISTAT);
- DIRQ(("IRQ_ENAB "));
- myri_enable_irq(lregs, mp->cregs);
- }
- DIRQ(("\n"));
-
- spin_unlock_irqrestore(&mp->irq_lock, flags);
-
- return IRQ_RETVAL(handled);
-}
-
-static int myri_open(struct net_device *dev)
-{
- struct myri_eth *mp = netdev_priv(dev);
-
- return myri_init(mp, in_interrupt());
-}
-
-static int myri_close(struct net_device *dev)
-{
- struct myri_eth *mp = netdev_priv(dev);
-
- myri_clean_rings(mp);
- return 0;
-}
-
-static void myri_tx_timeout(struct net_device *dev)
-{
- struct myri_eth *mp = netdev_priv(dev);
-
- printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
-
- dev->stats.tx_errors++;
- myri_init(mp, 0);
- netif_wake_queue(dev);
-}
-
-static int myri_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct myri_eth *mp = netdev_priv(dev);
- struct sendq __iomem *sq = mp->sq;
- struct myri_txd __iomem *txd;
- unsigned long flags;
- unsigned int head, tail;
- int len, entry;
- u32 dma_addr;
-
- DTX(("myri_start_xmit: "));
-
- myri_tx(mp, dev);
-
- netif_stop_queue(dev);
-
- /* This is just to prevent multiple PIO reads for TX_BUFFS_AVAIL. */
- head = sbus_readl(&sq->head);
- tail = sbus_readl(&sq->tail);
-
- if (!TX_BUFFS_AVAIL(head, tail)) {
- DTX(("no buffs available, returning 1\n"));
- return NETDEV_TX_BUSY;
- }
-
- spin_lock_irqsave(&mp->irq_lock, flags);
-
- DHDR(("xmit[skbdata(%p)]\n", skb->data));
-#ifdef DEBUG_HEADER
- dump_ehdr_and_myripad(((unsigned char *) skb->data));
-#endif
-
- /* XXX Maybe this can go as well. */
- len = skb->len;
- if (len & 3) {
- DTX(("len&3 "));
- len = (len + 4) & (~3);
- }
-
- entry = sbus_readl(&sq->tail);
-
- txd = &sq->myri_txd[entry];
- mp->tx_skbs[entry] = skb;
-
- /* Must do this before we sbus map it. */
- if (skb->data[MYRI_PAD_LEN] & 0x1) {
- sbus_writew(0xffff, &txd->addr[0]);
- sbus_writew(0xffff, &txd->addr[1]);
- sbus_writew(0xffff, &txd->addr[2]);
- sbus_writew(0xffff, &txd->addr[3]);
- } else {
- sbus_writew(0xffff, &txd->addr[0]);
- sbus_writew((skb->data[0] << 8) | skb->data[1], &txd->addr[1]);
- sbus_writew((skb->data[2] << 8) | skb->data[3], &txd->addr[2]);
- sbus_writew((skb->data[4] << 8) | skb->data[5], &txd->addr[3]);
- }
-
- dma_addr = dma_map_single(&mp->myri_op->dev, skb->data,
- len, DMA_TO_DEVICE);
- sbus_writel(dma_addr, &txd->myri_gathers[0].addr);
- sbus_writel(len, &txd->myri_gathers[0].len);
- sbus_writel(1, &txd->num_sg);
- sbus_writel(KERNEL_CHANNEL, &txd->chan);
- sbus_writel(len, &txd->len);
- sbus_writel((u32)-1, &txd->csum_off);
- sbus_writel(0, &txd->csum_field);
-
- sbus_writel(NEXT_TX(entry), &sq->tail);
- DTX(("BangTheChip "));
- bang_the_chip(mp);
-
- DTX(("tbusy=0, returning 0\n"));
- netif_start_queue(dev);
- spin_unlock_irqrestore(&mp->irq_lock, flags);
- return NETDEV_TX_OK;
-}
-
-/* Create the MyriNet MAC header for an arbitrary protocol layer
- *
- * saddr=NULL means use device source address
- * daddr=NULL means leave destination address (eg unresolved arp)
- */
-static int myri_header(struct sk_buff *skb, struct net_device *dev,
- unsigned short type, const void *daddr,
- const void *saddr, unsigned len)
-{
- struct ethhdr *eth = (struct ethhdr *) skb_push(skb, ETH_HLEN);
- unsigned char *pad = (unsigned char *) skb_push(skb, MYRI_PAD_LEN);
-
-#ifdef DEBUG_HEADER
- DHDR(("myri_header: pad[%02x,%02x] ", pad[0], pad[1]));
- dump_ehdr(eth);
-#endif
-
- /* Set the MyriNET padding identifier. */
- pad[0] = MYRI_PAD_LEN;
- pad[1] = 0xab;
-
- /* Set the protocol type. For a packet of type ETH_P_802_3/2 we put the
- * length in here instead.
- */
- if (type != ETH_P_802_3 && type != ETH_P_802_2)
- eth->h_proto = htons(type);
- else
- eth->h_proto = htons(len);
-
- /* Set the source hardware address. */
- if (saddr)
- memcpy(eth->h_source, saddr, dev->addr_len);
- else
- memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
-
- /* Anyway, the loopback-device should never use this function... */
- if (dev->flags & IFF_LOOPBACK) {
- int i;
- for (i = 0; i < dev->addr_len; i++)
- eth->h_dest[i] = 0;
- return dev->hard_header_len;
- }
-
- if (daddr) {
- memcpy(eth->h_dest, daddr, dev->addr_len);
- return dev->hard_header_len;
- }
- return -dev->hard_header_len;
-}
-
-/* Rebuild the MyriNet MAC header. This is called after an ARP
- * (or in future other address resolution) has completed on this
- * sk_buff. We now let ARP fill in the other fields.
- */
-static int myri_rebuild_header(struct sk_buff *skb)
-{
- unsigned char *pad = (unsigned char *) skb->data;
- struct ethhdr *eth = (struct ethhdr *) (pad + MYRI_PAD_LEN);
- struct net_device *dev = skb->dev;
-
-#ifdef DEBUG_HEADER
- DHDR(("myri_rebuild_header: pad[%02x,%02x] ", pad[0], pad[1]));
- dump_ehdr(eth);
-#endif
-
- /* Refill MyriNet padding identifiers, this is just being anal. */
- pad[0] = MYRI_PAD_LEN;
- pad[1] = 0xab;
-
- switch (eth->h_proto)
- {
-#ifdef CONFIG_INET
- case cpu_to_be16(ETH_P_IP):
- return arp_find(eth->h_dest, skb);
-#endif
-
- default:
- printk(KERN_DEBUG
- "%s: unable to resolve type %X addresses.\n",
- dev->name, (int)eth->h_proto);
-
- memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
- return 0;
- break;
- }
-
- return 0;
-}
-
-static int myri_header_cache(const struct neighbour *neigh, struct hh_cache *hh)
-{
- unsigned short type = hh->hh_type;
- unsigned char *pad;
- struct ethhdr *eth;
- const struct net_device *dev = neigh->dev;
-
- pad = ((unsigned char *) hh->hh_data) +
- HH_DATA_OFF(sizeof(*eth) + MYRI_PAD_LEN);
- eth = (struct ethhdr *) (pad + MYRI_PAD_LEN);
-
- if (type == htons(ETH_P_802_3))
- return -1;
-
- /* Refill MyriNet padding identifiers, this is just being anal. */
- pad[0] = MYRI_PAD_LEN;
- pad[1] = 0xab;
-
- eth->h_proto = type;
- memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
- memcpy(eth->h_dest, neigh->ha, dev->addr_len);
- hh->hh_len = 16;
- return 0;
-}
-
-
-/* Called by Address Resolution module to notify changes in address. */
-void myri_header_cache_update(struct hh_cache *hh,
- const struct net_device *dev,
- const unsigned char * haddr)
-{
- memcpy(((u8*)hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
- haddr, dev->addr_len);
-}
-
-static int myri_change_mtu(struct net_device *dev, int new_mtu)
-{
- if ((new_mtu < (ETH_HLEN + MYRI_PAD_LEN)) || (new_mtu > MYRINET_MTU))
- return -EINVAL;
- dev->mtu = new_mtu;
- return 0;
-}
-
-static void myri_set_multicast(struct net_device *dev)
-{
- /* Do nothing, all MyriCOM nodes transmit multicast frames
- * as broadcast packets...
- */
-}
-
-static inline void set_boardid_from_idprom(struct myri_eth *mp, int num)
-{
- mp->eeprom.id[0] = 0;
- mp->eeprom.id[1] = idprom->id_machtype;
- mp->eeprom.id[2] = (idprom->id_sernum >> 16) & 0xff;
- mp->eeprom.id[3] = (idprom->id_sernum >> 8) & 0xff;
- mp->eeprom.id[4] = (idprom->id_sernum >> 0) & 0xff;
- mp->eeprom.id[5] = num;
-}
-
-static inline void determine_reg_space_size(struct myri_eth *mp)
-{
- switch(mp->eeprom.cpuvers) {
- case CPUVERS_2_3:
- case CPUVERS_3_0:
- case CPUVERS_3_1:
- case CPUVERS_3_2:
- mp->reg_size = (3 * 128 * 1024) + 4096;
- break;
-
- case CPUVERS_4_0:
- case CPUVERS_4_1:
- mp->reg_size = ((4096<<1) + mp->eeprom.ramsz);
- break;
-
- case CPUVERS_4_2:
- case CPUVERS_5_0:
- default:
- printk("myricom: AIEEE weird cpu version %04x assuming pre4.0\n",
- mp->eeprom.cpuvers);
- mp->reg_size = (3 * 128 * 1024) + 4096;
- }
-}
-
-#ifdef DEBUG_DETECT
-static void dump_eeprom(struct myri_eth *mp)
-{
- printk("EEPROM: clockval[%08x] cpuvers[%04x] "
- "id[%02x,%02x,%02x,%02x,%02x,%02x]\n",
- mp->eeprom.cval, mp->eeprom.cpuvers,
- mp->eeprom.id[0], mp->eeprom.id[1], mp->eeprom.id[2],
- mp->eeprom.id[3], mp->eeprom.id[4], mp->eeprom.id[5]);
- printk("EEPROM: ramsz[%08x]\n", mp->eeprom.ramsz);
- printk("EEPROM: fvers[%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n",
- mp->eeprom.fvers[0], mp->eeprom.fvers[1], mp->eeprom.fvers[2],
- mp->eeprom.fvers[3], mp->eeprom.fvers[4], mp->eeprom.fvers[5],
- mp->eeprom.fvers[6], mp->eeprom.fvers[7]);
- printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n",
- mp->eeprom.fvers[8], mp->eeprom.fvers[9], mp->eeprom.fvers[10],
- mp->eeprom.fvers[11], mp->eeprom.fvers[12], mp->eeprom.fvers[13],
- mp->eeprom.fvers[14], mp->eeprom.fvers[15]);
- printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n",
- mp->eeprom.fvers[16], mp->eeprom.fvers[17], mp->eeprom.fvers[18],
- mp->eeprom.fvers[19], mp->eeprom.fvers[20], mp->eeprom.fvers[21],
- mp->eeprom.fvers[22], mp->eeprom.fvers[23]);
- printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x]\n",
- mp->eeprom.fvers[24], mp->eeprom.fvers[25], mp->eeprom.fvers[26],
- mp->eeprom.fvers[27], mp->eeprom.fvers[28], mp->eeprom.fvers[29],
- mp->eeprom.fvers[30], mp->eeprom.fvers[31]);
- printk("EEPROM: mvers[%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x\n",
- mp->eeprom.mvers[0], mp->eeprom.mvers[1], mp->eeprom.mvers[2],
- mp->eeprom.mvers[3], mp->eeprom.mvers[4], mp->eeprom.mvers[5],
- mp->eeprom.mvers[6], mp->eeprom.mvers[7]);
- printk("EEPROM: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x]\n",
- mp->eeprom.mvers[8], mp->eeprom.mvers[9], mp->eeprom.mvers[10],
- mp->eeprom.mvers[11], mp->eeprom.mvers[12], mp->eeprom.mvers[13],
- mp->eeprom.mvers[14], mp->eeprom.mvers[15]);
- printk("EEPROM: dlval[%04x] brd_type[%04x] bus_type[%04x] prod_code[%04x]\n",
- mp->eeprom.dlval, mp->eeprom.brd_type, mp->eeprom.bus_type,
- mp->eeprom.prod_code);
- printk("EEPROM: serial_num[%08x]\n", mp->eeprom.serial_num);
-}
-#endif
-
-static const struct header_ops myri_header_ops = {
- .create = myri_header,
- .rebuild = myri_rebuild_header,
- .cache = myri_header_cache,
- .cache_update = myri_header_cache_update,
-};
-
-static const struct net_device_ops myri_ops = {
- .ndo_open = myri_open,
- .ndo_stop = myri_close,
- .ndo_start_xmit = myri_start_xmit,
- .ndo_set_multicast_list = myri_set_multicast,
- .ndo_tx_timeout = myri_tx_timeout,
- .ndo_change_mtu = myri_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-static int __devinit myri_sbus_probe(struct platform_device *op)
-{
- struct device_node *dp = op->dev.of_node;
- static unsigned version_printed;
- struct net_device *dev;
- struct myri_eth *mp;
- const void *prop;
- static int num;
- int i, len;
-
- DET(("myri_ether_init(%p,%d):\n", op, num));
- dev = alloc_etherdev(sizeof(struct myri_eth));
- if (!dev)
- return -ENOMEM;
-
- if (version_printed++ == 0)
- printk(version);
-
- SET_NETDEV_DEV(dev, &op->dev);
-
- mp = netdev_priv(dev);
- spin_lock_init(&mp->irq_lock);
- mp->myri_op = op;
-
- /* Clean out skb arrays. */
- for (i = 0; i < (RX_RING_SIZE + 1); i++)
- mp->rx_skbs[i] = NULL;
-
- for (i = 0; i < TX_RING_SIZE; i++)
- mp->tx_skbs[i] = NULL;
-
- /* First check for EEPROM information. */
- prop = of_get_property(dp, "myrinet-eeprom-info", &len);
-
- if (prop)
- memcpy(&mp->eeprom, prop, sizeof(struct myri_eeprom));
- if (!prop) {
- /* No eeprom property, must cook up the values ourselves. */
- DET(("No EEPROM: "));
- mp->eeprom.bus_type = BUS_TYPE_SBUS;
- mp->eeprom.cpuvers =
- of_getintprop_default(dp, "cpu_version", 0);
- mp->eeprom.cval =
- of_getintprop_default(dp, "clock_value", 0);
- mp->eeprom.ramsz = of_getintprop_default(dp, "sram_size", 0);
- if (!mp->eeprom.cpuvers)
- mp->eeprom.cpuvers = CPUVERS_2_3;
- if (mp->eeprom.cpuvers < CPUVERS_3_0)
- mp->eeprom.cval = 0;
- if (!mp->eeprom.ramsz)
- mp->eeprom.ramsz = (128 * 1024);
-
- prop = of_get_property(dp, "myrinet-board-id", &len);
- if (prop)
- memcpy(&mp->eeprom.id[0], prop, 6);
- else
- set_boardid_from_idprom(mp, num);
-
- prop = of_get_property(dp, "fpga_version", &len);
- if (prop)
- memcpy(&mp->eeprom.fvers[0], prop, 32);
- else
- memset(&mp->eeprom.fvers[0], 0, 32);
-
- if (mp->eeprom.cpuvers == CPUVERS_4_1) {
- if (mp->eeprom.ramsz == (128 * 1024))
- mp->eeprom.ramsz = (256 * 1024);
- if ((mp->eeprom.cval == 0x40414041) ||
- (mp->eeprom.cval == 0x90449044))
- mp->eeprom.cval = 0x50e450e4;
- }
- }
-#ifdef DEBUG_DETECT
- dump_eeprom(mp);
-#endif
-
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = mp->eeprom.id[i];
-
- determine_reg_space_size(mp);
-
- /* Map in the MyriCOM register/localram set. */
- if (mp->eeprom.cpuvers < CPUVERS_4_0) {
- /* XXX Makes no sense, if control reg is non-existent this
- * XXX driver cannot function at all... maybe pre-4.0 is
- * XXX only a valid version for PCI cards? Ask feldy...
- */
- DET(("Mapping regs for cpuvers < CPUVERS_4_0\n"));
- mp->regs = of_ioremap(&op->resource[0], 0,
- mp->reg_size, "MyriCOM Regs");
- if (!mp->regs) {
- printk("MyriCOM: Cannot map MyriCOM registers.\n");
- goto err;
- }
- mp->lanai = mp->regs + (256 * 1024);
- mp->lregs = mp->lanai + (0x10000 * 2);
- } else {
- DET(("Mapping regs for cpuvers >= CPUVERS_4_0\n"));
- mp->cregs = of_ioremap(&op->resource[0], 0,
- PAGE_SIZE, "MyriCOM Control Regs");
- mp->lregs = of_ioremap(&op->resource[0], (256 * 1024),
- PAGE_SIZE, "MyriCOM LANAI Regs");
- mp->lanai = of_ioremap(&op->resource[0], (512 * 1024),
- mp->eeprom.ramsz, "MyriCOM SRAM");
- }
- DET(("Registers mapped: cregs[%p] lregs[%p] lanai[%p]\n",
- mp->cregs, mp->lregs, mp->lanai));
-
- if (mp->eeprom.cpuvers >= CPUVERS_4_0)
- mp->shmem_base = 0xf000;
- else
- mp->shmem_base = 0x8000;
-
- DET(("Shared memory base is %04x, ", mp->shmem_base));
-
- mp->shmem = (struct myri_shmem __iomem *)
- (mp->lanai + (mp->shmem_base * 2));
- DET(("shmem mapped at %p\n", mp->shmem));
-
- mp->rqack = &mp->shmem->channel.recvqa;
- mp->rq = &mp->shmem->channel.recvq;
- mp->sq = &mp->shmem->channel.sendq;
-
- /* Reset the board. */
- DET(("Resetting LANAI\n"));
- myri_reset_off(mp->lregs, mp->cregs);
- myri_reset_on(mp->cregs);
-
- /* Turn IRQ's off. */
- myri_disable_irq(mp->lregs, mp->cregs);
-
- /* Reset once more. */
- myri_reset_on(mp->cregs);
-
- /* Get the supported DVMA burst sizes from our SBUS. */
- mp->myri_bursts = of_getintprop_default(dp->parent,
- "burst-sizes", 0x00);
- if (!sbus_can_burst64())
- mp->myri_bursts &= ~(DMA_BURST64);
-
- DET(("MYRI bursts %02x\n", mp->myri_bursts));
-
- /* Encode SBUS interrupt level in second control register. */
- i = of_getintprop_default(dp, "interrupts", 0);
- if (i == 0)
- i = 4;
- DET(("prom_getint(interrupts)==%d, irqlvl set to %04x\n",
- i, (1 << i)));
-
- sbus_writel((1 << i), mp->cregs + MYRICTRL_IRQLVL);
-
- mp->dev = dev;
- dev->watchdog_timeo = 5*HZ;
- dev->irq = op->archdata.irqs[0];
- dev->netdev_ops = &myri_ops;
-
- /* Register interrupt handler now. */
- DET(("Requesting MYRIcom IRQ line.\n"));
- if (request_irq(dev->irq, myri_interrupt,
- IRQF_SHARED, "MyriCOM Ethernet", (void *) dev)) {
- printk("MyriCOM: Cannot register interrupt handler.\n");
- goto err;
- }
-
- dev->mtu = MYRINET_MTU;
- dev->header_ops = &myri_header_ops;
-
- dev->hard_header_len = (ETH_HLEN + MYRI_PAD_LEN);
-
- /* Load code onto the LANai. */
- DET(("Loading LANAI firmware\n"));
- if (myri_load_lanai(mp)) {
- printk(KERN_ERR "MyriCOM: Cannot Load LANAI firmware.\n");
- goto err_free_irq;
- }
-
- if (register_netdev(dev)) {
- printk("MyriCOM: Cannot register device.\n");
- goto err_free_irq;
- }
-
- dev_set_drvdata(&op->dev, mp);
-
- num++;
-
- printk("%s: MyriCOM MyriNET Ethernet %pM\n",
- dev->name, dev->dev_addr);
-
- return 0;
-
-err_free_irq:
- free_irq(dev->irq, dev);
-err:
- /* This will also free the co-allocated private data*/
- free_netdev(dev);
- return -ENODEV;
-}
-
-static int __devexit myri_sbus_remove(struct platform_device *op)
-{
- struct myri_eth *mp = dev_get_drvdata(&op->dev);
- struct net_device *net_dev = mp->dev;
-
- unregister_netdev(net_dev);
-
- free_irq(net_dev->irq, net_dev);
-
- if (mp->eeprom.cpuvers < CPUVERS_4_0) {
- of_iounmap(&op->resource[0], mp->regs, mp->reg_size);
- } else {
- of_iounmap(&op->resource[0], mp->cregs, PAGE_SIZE);
- of_iounmap(&op->resource[0], mp->lregs, (256 * 1024));
- of_iounmap(&op->resource[0], mp->lanai, (512 * 1024));
- }
-
- free_netdev(net_dev);
-
- dev_set_drvdata(&op->dev, NULL);
-
- return 0;
-}
-
-static const struct of_device_id myri_sbus_match[] = {
- {
- .name = "MYRICOM,mlanai",
- },
- {
- .name = "myri",
- },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, myri_sbus_match);
-
-static struct platform_driver myri_sbus_driver = {
- .driver = {
- .name = "myri",
- .owner = THIS_MODULE,
- .of_match_table = myri_sbus_match,
- },
- .probe = myri_sbus_probe,
- .remove = __devexit_p(myri_sbus_remove),
-};
-
-static int __init myri_sbus_init(void)
-{
- return platform_driver_register(&myri_sbus_driver);
-}
-
-static void __exit myri_sbus_exit(void)
-{
- platform_driver_unregister(&myri_sbus_driver);
-}
-
-module_init(myri_sbus_init);
-module_exit(myri_sbus_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE(FWNAME);
diff --git a/drivers/net/myri_sbus.h b/drivers/net/myri_sbus.h
deleted file mode 100644
index 80a2fa5..0000000
--- a/drivers/net/myri_sbus.h
+++ /dev/null
@@ -1,311 +0,0 @@
-/* myri_sbus.h: Defines for MyriCOM MyriNET SBUS card driver.
- *
- * Copyright (C) 1996 David S. Miller (davem@...p.rutgers.edu)
- */
-
-#ifndef _MYRI_SBUS_H
-#define _MYRI_SBUS_H
-
-/* LANAI Registers */
-#define LANAI_IPF0 0x00UL /* Context zero state registers.*/
-#define LANAI_CUR0 0x04UL
-#define LANAI_PREV0 0x08UL
-#define LANAI_DATA0 0x0cUL
-#define LANAI_DPF0 0x10UL
-#define LANAI_IPF1 0x14UL /* Context one state registers. */
-#define LANAI_CUR1 0x18UL
-#define LANAI_PREV1 0x1cUL
-#define LANAI_DATA1 0x20UL
-#define LANAI_DPF1 0x24UL
-#define LANAI_ISTAT 0x28UL /* Interrupt status. */
-#define LANAI_EIMASK 0x2cUL /* External IRQ mask. */
-#define LANAI_ITIMER 0x30UL /* IRQ timer. */
-#define LANAI_RTC 0x34UL /* Real Time Clock */
-#define LANAI_CSUM 0x38UL /* Checksum. */
-#define LANAI_DMAXADDR 0x3cUL /* SBUS DMA external address. */
-#define LANAI_DMALADDR 0x40UL /* SBUS DMA local address. */
-#define LANAI_DMACTR 0x44UL /* SBUS DMA counter. */
-#define LANAI_RXDMAPTR 0x48UL /* Receive DMA pointer. */
-#define LANAI_RXDMALIM 0x4cUL /* Receive DMA limit. */
-#define LANAI_TXDMAPTR 0x50UL /* Transmit DMA pointer. */
-#define LANAI_TXDMALIM 0x54UL /* Transmit DMA limit. */
-#define LANAI_TXDMALIMT 0x58UL /* Transmit DMA limit w/tail. */
- /* 0x5cUL, reserved */
-#define LANAI_RBYTE 0x60UL /* Receive byte. */
- /* 0x64-->0x6c, reserved */
-#define LANAI_RHALF 0x70UL /* Receive half-word. */
- /* 0x72UL, reserved */
-#define LANAI_RWORD 0x74UL /* Receive word. */
-#define LANAI_SALIGN 0x78UL /* Send align. */
-#define LANAI_SBYTE 0x7cUL /* SingleSend send-byte. */
-#define LANAI_SHALF 0x80UL /* SingleSend send-halfword. */
-#define LANAI_SWORD 0x84UL /* SingleSend send-word. */
-#define LANAI_SSENDT 0x88UL /* SingleSend special. */
-#define LANAI_DMADIR 0x8cUL /* DMA direction. */
-#define LANAI_DMASTAT 0x90UL /* DMA status. */
-#define LANAI_TIMEO 0x94UL /* Timeout register. */
-#define LANAI_MYRINET 0x98UL /* XXX MAGIC myricom thing */
-#define LANAI_HWDEBUG 0x9cUL /* Hardware debugging reg. */
-#define LANAI_LEDS 0xa0UL /* LED control. */
-#define LANAI_VERS 0xa4UL /* Version register. */
-#define LANAI_LINKON 0xa8UL /* Link activation reg. */
- /* 0xac-->0x104, reserved */
-#define LANAI_CVAL 0x108UL /* Clock value register. */
-#define LANAI_REG_SIZE 0x10cUL
-
-/* Interrupt status bits. */
-#define ISTAT_DEBUG 0x80000000
-#define ISTAT_HOST 0x40000000
-#define ISTAT_LAN7 0x00800000
-#define ISTAT_LAN6 0x00400000
-#define ISTAT_LAN5 0x00200000
-#define ISTAT_LAN4 0x00100000
-#define ISTAT_LAN3 0x00080000
-#define ISTAT_LAN2 0x00040000
-#define ISTAT_LAN1 0x00020000
-#define ISTAT_LAN0 0x00010000
-#define ISTAT_WRDY 0x00008000
-#define ISTAT_HRDY 0x00004000
-#define ISTAT_SRDY 0x00002000
-#define ISTAT_LINK 0x00001000
-#define ISTAT_FRES 0x00000800
-#define ISTAT_NRES 0x00000800
-#define ISTAT_WAKE 0x00000400
-#define ISTAT_OB2 0x00000200
-#define ISTAT_OB1 0x00000100
-#define ISTAT_TAIL 0x00000080
-#define ISTAT_WDOG 0x00000040
-#define ISTAT_TIME 0x00000020
-#define ISTAT_DMA 0x00000010
-#define ISTAT_SEND 0x00000008
-#define ISTAT_BUF 0x00000004
-#define ISTAT_RECV 0x00000002
-#define ISTAT_BRDY 0x00000001
-
-/* MYRI Registers */
-#define MYRI_RESETOFF 0x00UL
-#define MYRI_RESETON 0x04UL
-#define MYRI_IRQOFF 0x08UL
-#define MYRI_IRQON 0x0cUL
-#define MYRI_WAKEUPOFF 0x10UL
-#define MYRI_WAKEUPON 0x14UL
-#define MYRI_IRQREAD 0x18UL
- /* 0x1c-->0x3ffc, reserved */
-#define MYRI_LOCALMEM 0x4000UL
-#define MYRI_REG_SIZE 0x25000UL
-
-/* Shared memory interrupt mask. */
-#define SHMEM_IMASK_RX 0x00000002
-#define SHMEM_IMASK_TX 0x00000001
-
-/* Just to make things readable. */
-#define KERNEL_CHANNEL 0
-
-/* The size of this must be >= 129 bytes. */
-struct myri_eeprom {
- unsigned int cval;
- unsigned short cpuvers;
- unsigned char id[6];
- unsigned int ramsz;
- unsigned char fvers[32];
- unsigned char mvers[16];
- unsigned short dlval;
- unsigned short brd_type;
- unsigned short bus_type;
- unsigned short prod_code;
- unsigned int serial_num;
- unsigned short _reserved[24];
- unsigned int _unused[2];
-};
-
-/* EEPROM bus types, only SBUS is valid in this driver. */
-#define BUS_TYPE_SBUS 1
-
-/* EEPROM CPU revisions. */
-#define CPUVERS_2_3 0x0203
-#define CPUVERS_3_0 0x0300
-#define CPUVERS_3_1 0x0301
-#define CPUVERS_3_2 0x0302
-#define CPUVERS_4_0 0x0400
-#define CPUVERS_4_1 0x0401
-#define CPUVERS_4_2 0x0402
-#define CPUVERS_5_0 0x0500
-
-/* MYRI Control Registers */
-#define MYRICTRL_CTRL 0x00UL
-#define MYRICTRL_IRQLVL 0x02UL
-#define MYRICTRL_REG_SIZE 0x04UL
-
-/* Global control register defines. */
-#define CONTROL_ROFF 0x8000 /* Reset OFF. */
-#define CONTROL_RON 0x4000 /* Reset ON. */
-#define CONTROL_EIRQ 0x2000 /* Enable IRQ's. */
-#define CONTROL_DIRQ 0x1000 /* Disable IRQ's. */
-#define CONTROL_WON 0x0800 /* Wake-up ON. */
-
-#define MYRI_SCATTER_ENTRIES 8
-#define MYRI_GATHER_ENTRIES 16
-
-struct myri_sglist {
- u32 addr;
- u32 len;
-};
-
-struct myri_rxd {
- struct myri_sglist myri_scatters[MYRI_SCATTER_ENTRIES]; /* DMA scatter list.*/
- u32 csum; /* HW computed checksum. */
- u32 ctx;
- u32 num_sg; /* Total scatter entries. */
-};
-
-struct myri_txd {
- struct myri_sglist myri_gathers[MYRI_GATHER_ENTRIES]; /* DMA scatter list. */
- u32 num_sg; /* Total scatter entries. */
- u16 addr[4]; /* XXX address */
- u32 chan;
- u32 len; /* Total length of packet. */
- u32 csum_off; /* Where data to csum is. */
- u32 csum_field; /* Where csum goes in pkt. */
-};
-
-#define MYRINET_MTU 8432
-#define RX_ALLOC_SIZE 8448
-#define MYRI_PAD_LEN 2
-#define RX_COPY_THRESHOLD 256
-
-/* These numbers are cast in stone, new firmware is needed if
- * you want to change them.
- */
-#define TX_RING_MAXSIZE 16
-#define RX_RING_MAXSIZE 16
-
-#define TX_RING_SIZE 16
-#define RX_RING_SIZE 16
-
-/* GRRR... */
-static __inline__ int NEXT_RX(int num)
-{
- /* XXX >=??? */
- if(++num > RX_RING_SIZE)
- num = 0;
- return num;
-}
-
-static __inline__ int PREV_RX(int num)
-{
- if(--num < 0)
- num = RX_RING_SIZE;
- return num;
-}
-
-#define NEXT_TX(num) (((num) + 1) & (TX_RING_SIZE - 1))
-#define PREV_TX(num) (((num) - 1) & (TX_RING_SIZE - 1))
-
-#define TX_BUFFS_AVAIL(head, tail) \
- ((head) <= (tail) ? \
- (head) + (TX_RING_SIZE - 1) - (tail) : \
- (head) - (tail) - 1)
-
-struct sendq {
- u32 tail;
- u32 head;
- u32 hdebug;
- u32 mdebug;
- struct myri_txd myri_txd[TX_RING_MAXSIZE];
-};
-
-struct recvq {
- u32 head;
- u32 tail;
- u32 hdebug;
- u32 mdebug;
- struct myri_rxd myri_rxd[RX_RING_MAXSIZE + 1];
-};
-
-#define MYRI_MLIST_SIZE 8
-
-struct mclist {
- u32 maxlen;
- u32 len;
- u32 cache;
- struct pair {
- u8 addr[8];
- u32 val;
- } mc_pairs[MYRI_MLIST_SIZE];
- u8 bcast_addr[8];
-};
-
-struct myri_channel {
- u32 state; /* State of the channel. */
- u32 busy; /* Channel is busy. */
- struct sendq sendq; /* Device tx queue. */
- struct recvq recvq; /* Device rx queue. */
- struct recvq recvqa; /* Device rx queue acked. */
- u32 rbytes; /* Receive bytes. */
- u32 sbytes; /* Send bytes. */
- u32 rmsgs; /* Receive messages. */
- u32 smsgs; /* Send messages. */
- struct mclist mclist; /* Device multicast list. */
-};
-
-/* Values for per-channel state. */
-#define STATE_WFH 0 /* Waiting for HOST. */
-#define STATE_WFN 1 /* Waiting for NET. */
-#define STATE_READY 2 /* Ready. */
-
-struct myri_shmem {
- u8 addr[8]; /* Board's address. */
- u32 nchan; /* Number of channels. */
- u32 burst; /* SBUS dma burst enable. */
- u32 shakedown; /* DarkkkkStarrr Crashesss... */
- u32 send; /* Send wanted. */
- u32 imask; /* Interrupt enable mask. */
- u32 mlevel; /* Map level. */
- u32 debug[4]; /* Misc. debug areas. */
- struct myri_channel channel; /* Only one channel on a host. */
-};
-
-struct myri_eth {
- /* These are frequently accessed, keep together
- * to obtain good cache hit rates.
- */
- spinlock_t irq_lock;
- struct myri_shmem __iomem *shmem; /* Shared data structures. */
- void __iomem *cregs; /* Control register space. */
- struct recvq __iomem *rqack; /* Where we ack rx's. */
- struct recvq __iomem *rq; /* Where we put buffers. */
- struct sendq __iomem *sq; /* Where we stuff tx's. */
- struct net_device *dev; /* Linux/NET dev struct. */
- int tx_old; /* To speed up tx cleaning. */
- void __iomem *lregs; /* Quick ptr to LANAI regs. */
- struct sk_buff *rx_skbs[RX_RING_SIZE+1];/* RX skb's */
- struct sk_buff *tx_skbs[TX_RING_SIZE]; /* TX skb's */
-
- /* These are less frequently accessed. */
- void __iomem *regs; /* MyriCOM register space. */
- void __iomem *lanai; /* View 2 of register space. */
- unsigned int myri_bursts; /* SBUS bursts. */
- struct myri_eeprom eeprom; /* Local copy of EEPROM. */
- unsigned int reg_size; /* Size of register space. */
- unsigned int shmem_base; /* Offset to shared ram. */
- struct platform_device *myri_op; /* Our OF device struct. */
-};
-
-/* We use this to acquire receive skb's that we can DMA directly into. */
-#define ALIGNED_RX_SKB_ADDR(addr) \
- ((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr))
-static inline struct sk_buff *myri_alloc_skb(unsigned int length, gfp_t gfp_flags)
-{
- struct sk_buff *skb;
-
- skb = alloc_skb(length + 64, gfp_flags);
- if(skb) {
- int offset = ALIGNED_RX_SKB_ADDR(skb->data);
-
- if(offset)
- skb_reserve(skb, offset);
- }
- return skb;
-}
-
-#endif /* !(_MYRI_SBUS_H) */
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists