| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1308938676-31121-4-git-send-email-shawn.guo@linaro.org>
Date: Sat, 25 Jun 2011 02:04:34 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
linux-serial@...r.kernel.org, devicetree-discuss@...ts.ozlabs.org,
patches@...aro.org, Shawn Guo <shawn.guo@...aro.org>,
Jeremy Kerr <jeremy.kerr@...onical.com>,
Jason Liu <jason.hui@...aro.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Alan Cox <alan@...rguk.ukuu.org.uk>
Subject: [PATCH v2 3/5] serial/imx: add device tree support
It adds device tree data parsing support for imx tty/serial driver.
Signed-off-by: Jeremy Kerr <jeremy.kerr@...onical.com>
Signed-off-by: Jason Liu <jason.hui@...aro.org>
Signed-off-by: Shawn Guo <shawn.guo@...aro.org>
Cc: Sascha Hauer <s.hauer@...gutronix.de>
Cc: Alan Cox <alan@...rguk.ukuu.org.uk>
---
.../bindings/tty/serial/fsl-imx-uart.txt | 20 +++++
drivers/tty/serial/imx.c | 82 +++++++++++++++++---
2 files changed, 92 insertions(+), 10 deletions(-)
create mode 100644 Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
new file mode 100644
index 0000000..9aafe0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt
@@ -0,0 +1,20 @@
+* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible : should be "fsl,<soc>-uart"
+- reg : address and length of the register set for the device
+- interrupts : should contain uart interrupt
+- id : should be the port ID defined by soc
+
+Optional properties:
+- fsl,uart-has-rtscts : indicate the uart has rts and cts
+- fsl,irda-mode : support irda mode
+
+Example:
+
+uart@...bc000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fbc000 0x4000>;
+ interrupts = <31>;
+ fsl,uart-has-rtscts;
+};
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 8a6f4e1..bef27b3 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -45,6 +45,8 @@
#include <linux/delay.h>
#include <linux/rational.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -227,6 +229,12 @@ static struct imx_uart_data imx_uart_devdata[] = {
#define IS_IMX1_UART(sport) (sport->devdata->type == IMX1_UART)
#define IS_IMX2_UART(sport) (sport->devdata->type == IMX2_UART)
+static struct of_device_id imx_uart_dt_ids[] = {
+ { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], },
+ { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX2_UART], },
+ { /* sentinel */ },
+};
+
/*
* Handle any change of modem status signal since we were last called.
*/
@@ -1250,6 +1258,58 @@ static int serial_imx_resume(struct platform_device *dev)
return 0;
}
+#ifdef CONFIG_OF
+static int serial_imx_probe_dt(struct imx_port *sport,
+ struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ const struct of_device_id *of_id =
+ of_match_device(imx_uart_dt_ids, &pdev->dev);
+
+ if (!node)
+ return -ENODEV;
+
+ pdev->id = of_alias_get_id(node, "serial");
+ if (pdev->id < 0)
+ return -ENODEV;
+
+ if (of_get_property(node, "fsl,uart-has-rtscts", NULL))
+ sport->have_rtscts = 1;
+
+ if (of_get_property(node, "fsl,irda-mode", NULL))
+ sport->use_irda = 1;
+
+ sport->devdata = of_id->data;
+
+ return 0;
+}
+#else
+static int serial_imx_probe_dt(struct imx_port *sport,
+ struct platform_device *pdev)
+{
+ return -ENODEV;
+}
+#endif
+
+static int serial_imx_probe_pdata(struct imx_port *sport,
+ struct platform_device *pdev)
+{
+ struct imxuart_platform_data *pdata = pdev->dev.platform_data;
+
+ if (!pdata)
+ return 0;
+
+ if (pdata->flags & IMXUART_HAVE_RTSCTS)
+ sport->have_rtscts = 1;
+
+ if (pdata->flags & IMXUART_IRDA)
+ sport->use_irda = 1;
+
+ sport->devdata = &imx_uart_devdata[pdev->id_entry->driver_data];
+
+ return 0;
+}
+
static int serial_imx_probe(struct platform_device *pdev)
{
struct imx_port *sport;
@@ -1262,6 +1322,12 @@ static int serial_imx_probe(struct platform_device *pdev)
if (!sport)
return -ENOMEM;
+ ret = serial_imx_probe_dt(sport, pdev);
+ if (ret == -ENODEV)
+ ret = serial_imx_probe_pdata(sport, pdev);
+ if (ret)
+ goto free;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
ret = -ENODEV;
@@ -1290,7 +1356,6 @@ static int serial_imx_probe(struct platform_device *pdev)
init_timer(&sport->timer);
sport->timer.function = imx_timeout;
sport->timer.data = (unsigned long)sport;
- sport->devdata = &imx_uart_devdata[pdev->id_entry->driver_data];
sport->clk = clk_get(&pdev->dev, "uart");
if (IS_ERR(sport->clk)) {
@@ -1301,17 +1366,13 @@ static int serial_imx_probe(struct platform_device *pdev)
sport->port.uartclk = clk_get_rate(sport->clk);
- imx_ports[pdev->id] = sport;
+ if (imx_ports[sport->port.line]) {
+ ret = -EBUSY;
+ goto clkput;
+ }
+ imx_ports[sport->port.line] = sport;
pdata = pdev->dev.platform_data;
- if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
- sport->have_rtscts = 1;
-
-#ifdef CONFIG_IRDA
- if (pdata && (pdata->flags & IMXUART_IRDA))
- sport->use_irda = 1;
-#endif
-
if (pdata && pdata->init) {
ret = pdata->init(pdev);
if (ret)
@@ -1386,6 +1447,7 @@ static struct platform_driver serial_imx_driver = {
.driver = {
.name = "imx-uart",
.owner = THIS_MODULE,
+ .of_match_table = imx_uart_dt_ids,
},
};
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists