[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1309010363-22750-10-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Sat, 25 Jun 2011 06:58:20 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
Nicolas Pitre <nico@...xnic.net>,
Donald Becker <becker@...ld.com>, Erik Stahlman <erik@...edu>
Subject: [RFC 09/72] smc: Move the SMC drivers
Moves the SMC drivers into drivers/net/ethernet/smc/ and the
necessary Kconfig and Makefile changes. Also did some cleanup
of NET_VENDOR_SMC Kconfig tag for the 8390 based drivers.
CC: Nicolas Pitre <nico@...xnic.net>
CC: Donald Becker <becker@...ld.com>
CC: Erik Stahlman <erik@...edu>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
MAINTAINERS | 2 +-
drivers/net/Kconfig | 51 -------------------------
drivers/net/Makefile | 4 --
drivers/net/ethernet/8390/Kconfig | 21 ++--------
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/smc/Kconfig | 61 ++++++++++++++++++++++++++++++
drivers/net/ethernet/smc/Makefile | 7 +++
drivers/net/{ => ethernet/smc}/epic100.c | 0
drivers/net/{ => ethernet/smc}/smc9194.c | 0
drivers/net/{ => ethernet/smc}/smc9194.h | 0
drivers/net/{ => ethernet/smc}/smc91x.c | 0
drivers/net/{ => ethernet/smc}/smc91x.h | 0
13 files changed, 75 insertions(+), 73 deletions(-)
create mode 100644 drivers/net/ethernet/smc/Kconfig
create mode 100644 drivers/net/ethernet/smc/Makefile
rename drivers/net/{ => ethernet/smc}/epic100.c (100%)
rename drivers/net/{ => ethernet/smc}/smc9194.c (100%)
rename drivers/net/{ => ethernet/smc}/smc9194.h (100%)
rename drivers/net/{ => ethernet/smc}/smc91x.c (100%)
rename drivers/net/{ => ethernet/smc}/smc91x.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4929f4a..4dcfdc8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5778,7 +5778,7 @@ F: mm/sl?b.c
SMC91x ETHERNET DRIVER
M: Nicolas Pitre <nico@...xnic.net>
S: Odd Fixes
-F: drivers/net/smc91x.*
+F: drivers/net/ethernet/smc/smc91x.*
SMM665 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@...ck-us.net>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 802be52..c3399a5 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -538,39 +538,6 @@ config BFIN_MAC_USE_HWSTAMP
help
To support the IEEE 1588 Precision Time Protocol (PTP), select y here
-config SMC9194
- tristate "SMC 9194 support"
- depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
- select CRC32
- ---help---
- This is support for the SMC9xxx based Ethernet cards. Choose this
- option if you have a DELL laptop with the docking station, or
- another SMC9192/9194 based chipset. Say Y if you want it compiled
- into the kernel, and read the file
- <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called smc9194.
-
-config SMC91X
- tristate "SMC 91C9x/91C1xxx support"
- select CRC32
- select MII
- depends on ARM || M32R || SUPERH || \
- MIPS || BLACKFIN || MN10300 || COLDFIRE
- help
- This is a driver for SMC's 91x series of Ethernet chipsets,
- including the SMC91C94 and the SMC91C111. Say Y if you want it
- compiled into the kernel, and read the file
- <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called smc91x. If you want to compile it as a
- module, say M here and read <file:Documentation/kbuild/modules.txt>.
-
config PXA168_ETH
tristate "Marvell pxa168 ethernet support"
depends on CPU_PXA168
@@ -1145,17 +1112,6 @@ config SIS900
To compile this driver as a module, choose M here: the module
will be called sis900. This is recommended.
-config EPIC100
- tristate "SMC EtherPower II"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
- which is based on the SMC83c17x (EPIC/100).
- More specific information and updates are available from
- <http://www.scyld.com/network/epic100.html>.
-
config SMSC9420
tristate "SMSC LAN9420 PCI ethernet adapter support"
depends on NET_PCI && PCI
@@ -1886,13 +1842,6 @@ config MYRI10GE_DCA
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
-config NETXEN_NIC
- tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
- depends on PCI
- select FW_LOADER
- help
- This enables the support for NetXen's Gigabit Ethernet card.
-
config NIU
tristate "Sun Neptune 10Gbit Ethernet support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 9dcbcc7..aa3296f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -55,7 +55,6 @@ obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
obj-$(CONFIG_TLAN) += tlan.o
-obj-$(CONFIG_EPIC100) += epic100.o
obj-$(CONFIG_SMSC9420) += smsc9420.o
obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
@@ -95,7 +94,6 @@ obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_HP100) += hp100.o
-obj-$(CONFIG_SMC9194) += smc9194.o
obj-$(CONFIG_FEC) += fec.o
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
@@ -184,7 +182,6 @@ obj-$(CONFIG_IBMVETH) += ibmveth.o
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_VXGE) += vxge/
obj-$(CONFIG_MYRI10GE) += myri10ge/
-obj-$(CONFIG_SMC91X) += smc91x.o
obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_SMSC911X) += smsc911x.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
@@ -232,7 +229,6 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-$(CONFIG_FS_ENET) += fs_enet/
-obj-$(CONFIG_NETXEN_NIC) += netxen/
obj-$(CONFIG_NIU) += niu.o
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
obj-$(CONFIG_SFC) += sfc/
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index 3c20f26..db03f52 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -242,22 +242,9 @@ config STNIC
If unsure, say N.
-config NET_VENDOR_SMC
- bool "Western Digital/SMC cards"
- depends on NET_VENDOR_8390 && (ISA || MCA || EISA || MAC)
- ---help---
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about Western Digital cards. If you say Y, you will be
- asked for your specific card in the following questions.
-
config ULTRAMCA
tristate "SMC Ultra MCA support"
- depends on NET_VENDOR_SMC && MCA
+ depends on NET_VENDOR_8390 && MCA
select CRC32
---help---
If you have a network (Ethernet) card of this type and are running
@@ -269,7 +256,7 @@ config ULTRAMCA
config ULTRA
tristate "SMC Ultra support"
- depends on NET_VENDOR_SMC && ISA
+ depends on NET_VENDOR_8390 && ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
@@ -288,7 +275,7 @@ config ULTRA
config ULTRA32
tristate "SMC Ultra32 EISA support"
- depends on NET_VENDOR_SMC && EISA
+ depends on NET_VENDOR_8390 && EISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
@@ -300,7 +287,7 @@ config ULTRA32
config WD80x3
tristate "WD80*3 support"
- depends on NET_VENDOR_SMC && ISA
+ depends on NET_VENDOR_8390 && ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index ab591bb..ca75c40 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -18,5 +18,6 @@ source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
+source "drivers/net/ethernet/smc/Kconfig"
endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index d8cf120..125b332 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+obj-$(CONFIG_NET_VENDOR_SMC) += smc/
diff --git a/drivers/net/ethernet/smc/Kconfig b/drivers/net/ethernet/smc/Kconfig
new file mode 100644
index 0000000..492ac29
--- /dev/null
+++ b/drivers/net/ethernet/smc/Kconfig
@@ -0,0 +1,61 @@
+#
+# Western Digital/SMC network device configuration
+#
+
+config NET_VENDOR_SMC
+ bool "SMC/Western Digital devices"
+ depends on ISA || MAC || ARM || MIPS || M32R || SUPERH || \
+ BLACKFIN || MN10300 || COLDFIRE || PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Western Digital cards. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+config SMC9194
+ tristate "SMC 9194 support"
+ depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
+ select CRC32
+ ---help---
+ This is support for the SMC9xxx based Ethernet cards. Choose this
+ option if you have a DELL laptop with the docking station, or
+ another SMC9192/9194 based chipset. Say Y if you want it compiled
+ into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called smc9194.
+
+config SMC91X
+ tristate "SMC 91C9x/91C1xxx support"
+ select CRC32
+ select MII
+ depends on NET_VENDOR_SMC && (ARM || M32R || SUPERH || \
+ MIPS || BLACKFIN || MN10300 || COLDFIRE)
+ ---help---
+ This is a driver for SMC's 91x series of Ethernet chipsets,
+ including the SMC91C94 and the SMC91C111. Say Y if you want it
+ compiled into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called smc91x. If you want to compile it as a
+ module, say M here and read <file:Documentation/kbuild/modules.txt>.
+
+config EPIC100
+ tristate "SMC EtherPower II"
+ depends on NET_VENDOR_SMC && PCI
+ select CRC32
+ select MII
+ ---help---
+ This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
+ which is based on the SMC83c17x (EPIC/100).
+ More specific information and updates are available from
+ <http://www.scyld.com/network/epic100.html>.
diff --git a/drivers/net/ethernet/smc/Makefile b/drivers/net/ethernet/smc/Makefile
new file mode 100644
index 0000000..b414266
--- /dev/null
+++ b/drivers/net/ethernet/smc/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the SMC network device drivers.
+#
+
+obj-$(CONFIG_SMC9194) += smc9194.o
+obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_EPIC100) += epic100.o
diff --git a/drivers/net/epic100.c b/drivers/net/ethernet/smc/epic100.c
similarity index 100%
rename from drivers/net/epic100.c
rename to drivers/net/ethernet/smc/epic100.c
diff --git a/drivers/net/smc9194.c b/drivers/net/ethernet/smc/smc9194.c
similarity index 100%
rename from drivers/net/smc9194.c
rename to drivers/net/ethernet/smc/smc9194.c
diff --git a/drivers/net/smc9194.h b/drivers/net/ethernet/smc/smc9194.h
similarity index 100%
rename from drivers/net/smc9194.h
rename to drivers/net/ethernet/smc/smc9194.h
diff --git a/drivers/net/smc91x.c b/drivers/net/ethernet/smc/smc91x.c
similarity index 100%
rename from drivers/net/smc91x.c
rename to drivers/net/ethernet/smc/smc91x.c
diff --git a/drivers/net/smc91x.h b/drivers/net/ethernet/smc/smc91x.h
similarity index 100%
rename from drivers/net/smc91x.h
rename to drivers/net/ethernet/smc/smc91x.h
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists