| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1309010363-22750-27-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Sat, 25 Jun 2011 06:58:37 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
Sriram <srk@...com>, Vinay Hegde <vinay.hegde@...com>,
Cyril Chemparathy <cyril@...com>,
Russell King <linux@....linux.org.uk>,
Wan ZongShun <mcuos.com@...il.com>,
Lennert Buytenhek <kernel@...tstofly.org>,
Krzysztof Halasa <khc@...waw.pl>
Subject: [RFC 26/72] arm: Move the ARM/ACORN drivers
Move the ARM/ACORN drivers into drivers/net/ethernet/arm/ and make the
necessary Kconfig and Makefile changes.
There were 4 drivers (TI Davinci & ftmac100) not in the
drivers/net/arm/ which should have been since they are only supported
under ARM, so they were added to the new directory structure.
NOTE: There are no "maintainers" for the TI Davinci drivers, so I am
CC'ing the last 3 major contributors from TI.
CC: Sriram <srk@...com>
CC: Vinay Hegde <vinay.hegde@...com>
CC: Cyril Chemparathy <cyril@...com>
CC: Russell King <linux@....linux.org.uk>
CC: Wan ZongShun <mcuos.com@...il.com>
CC: Lennert Buytenhek <kernel@...tstofly.org>
CC: Krzysztof Halasa <khc@...waw.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
MAINTAINERS | 10 +-
drivers/net/Kconfig | 33 -------
drivers/net/Makefile | 5 -
drivers/net/arm/Kconfig | 74 ---------------
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/arm/Kconfig | 120 ++++++++++++++++++++++++
drivers/net/{ => ethernet}/arm/Makefile | 4 +-
drivers/net/{ => ethernet}/arm/am79c961a.c | 0
drivers/net/{ => ethernet}/arm/am79c961a.h | 0
drivers/net/{ => ethernet}/arm/at91_ether.c | 0
drivers/net/{ => ethernet}/arm/at91_ether.h | 0
drivers/net/{ => ethernet/arm}/davinci_cpdma.c | 0
drivers/net/{ => ethernet/arm}/davinci_cpdma.h | 0
drivers/net/{ => ethernet/arm}/davinci_emac.c | 0
drivers/net/{ => ethernet/arm}/davinci_mdio.c | 0
drivers/net/{ => ethernet}/arm/ep93xx_eth.c | 0
drivers/net/{ => ethernet}/arm/ether1.c | 0
drivers/net/{ => ethernet}/arm/ether1.h | 0
drivers/net/{ => ethernet}/arm/ether3.c | 0
drivers/net/{ => ethernet}/arm/ether3.h | 0
drivers/net/{ => ethernet}/arm/etherh.c | 0
drivers/net/{ => ethernet}/arm/ixp4xx_eth.c | 0
drivers/net/{ => ethernet}/arm/ks8695net.c | 0
drivers/net/{ => ethernet}/arm/ks8695net.h | 0
drivers/net/{ => ethernet}/arm/w90p910_ether.c | 0
26 files changed, 130 insertions(+), 118 deletions(-)
delete mode 100644 drivers/net/arm/Kconfig
create mode 100644 drivers/net/ethernet/arm/Kconfig
rename drivers/net/{ => ethernet}/arm/Makefile (74%)
rename drivers/net/{ => ethernet}/arm/am79c961a.c (100%)
rename drivers/net/{ => ethernet}/arm/am79c961a.h (100%)
rename drivers/net/{ => ethernet}/arm/at91_ether.c (100%)
rename drivers/net/{ => ethernet}/arm/at91_ether.h (100%)
rename drivers/net/{ => ethernet/arm}/davinci_cpdma.c (100%)
rename drivers/net/{ => ethernet/arm}/davinci_cpdma.h (100%)
rename drivers/net/{ => ethernet/arm}/davinci_emac.c (100%)
rename drivers/net/{ => ethernet/arm}/davinci_mdio.c (100%)
rename drivers/net/{ => ethernet}/arm/ep93xx_eth.c (100%)
rename drivers/net/{ => ethernet}/arm/ether1.c (100%)
rename drivers/net/{ => ethernet}/arm/ether1.h (100%)
rename drivers/net/{ => ethernet}/arm/ether3.c (100%)
rename drivers/net/{ => ethernet}/arm/ether3.h (100%)
rename drivers/net/{ => ethernet}/arm/etherh.c (100%)
rename drivers/net/{ => ethernet}/arm/ixp4xx_eth.c (100%)
rename drivers/net/{ => ethernet}/arm/ks8695net.c (100%)
rename drivers/net/{ => ethernet}/arm/ks8695net.h (100%)
rename drivers/net/{ => ethernet}/arm/w90p910_ether.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 90925d9..7469e6c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -726,7 +726,7 @@ L: linux-arm-kernel@...ts.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
S: Maintained
F: arch/arm/mach-ebsa110/
-F: drivers/net/arm/am79c961a.*
+F: drivers/net/ethernet/arm/am79c961a.*
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
M: Daniel Ribeiro <drwyrm@...il.com>
@@ -995,7 +995,7 @@ F: arch/arm/include/asm/hardware/ioc.h
F: arch/arm/include/asm/hardware/iomd.h
F: arch/arm/include/asm/hardware/memc.h
F: arch/arm/mach-rpc/
-F: drivers/net/arm/ether*
+F: drivers/net/ethernet/arm/ether*
F: drivers/scsi/arm/
ARM/SHARK MACHINE SUPPORT
@@ -1107,7 +1107,7 @@ F: arch/arm/mach-nuc93x/
F: drivers/input/keyboard/w90p910_keypad.c
F: drivers/input/touchscreen/w90p910_ts.c
F: drivers/watchdog/nuc900_wdt.c
-F: drivers/net/arm/w90p910_ether.c
+F: drivers/net/ethernet/arm/w90p910_ether.c
F: drivers/mtd/nand/nuc900_nand.c
F: drivers/rtc/rtc-nuc900.c
F: drivers/spi/spi_nuc900.c
@@ -1741,7 +1741,7 @@ CIRRUS LOGIC EP93XX ETHERNET DRIVER
M: Hartley Sweeten <hsweeten@...ionengravers.com>
L: netdev@...r.kernel.org
S: Maintained
-F: drivers/net/arm/ep93xx_eth.c
+F: drivers/net/ethernet/arm/ep93xx_eth.c
CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
M: Lennert Buytenhek <kernel@...tstofly.org>
@@ -3287,7 +3287,7 @@ F: arch/arm/mach-ixp4xx/include/mach/qmgr.h
F: arch/arm/mach-ixp4xx/include/mach/npe.h
F: arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
F: arch/arm/mach-ixp4xx/ixp4xx_npe.c
-F: drivers/net/arm/ixp4xx_eth.c
+F: drivers/net/ethernet/arm/ixp4xx_eth.c
F: drivers/net/wan/ixp4xx_hss.c
INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a2c032c..3568fc2 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -235,8 +235,6 @@ config MACB
To compile this driver as a module, choose M here: the module
will be called macb.
-source "drivers/net/arm/Kconfig"
-
config ARIADNE
tristate "Ariadne support"
depends on ZORRO
@@ -409,37 +407,6 @@ config NET_NETX
To compile this driver as a module, choose M here. The module
will be called netx-eth.
-config TI_DAVINCI_EMAC
- tristate "TI DaVinci EMAC Support"
- depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
- select TI_DAVINCI_MDIO
- select TI_DAVINCI_CPDMA
- select PHYLIB
- help
- This driver supports TI's DaVinci Ethernet .
-
- To compile this driver as a module, choose M here: the module
- will be called davinci_emac_driver. This is recommended.
-
-config TI_DAVINCI_MDIO
- tristate "TI DaVinci MDIO Support"
- depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
- select PHYLIB
- help
- This driver supports TI's DaVinci MDIO module.
-
- To compile this driver as a module, choose M here: the module
- will be called davinci_mdio. This is recommended.
-
-config TI_DAVINCI_CPDMA
- tristate "TI DaVinci CPDMA Support"
- depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
- help
- This driver supports TI's DaVinci CPDMA dma engine.
-
- To compile this driver as a module, choose M here: the module
- will be called davinci_cpdma. This is recommended.
-
config DM9000
tristate "DM9000 support"
depends on ARM || BLACKFIN || MIPS
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 0d016c1..d3eb443 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -6,10 +6,6 @@ obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_PHYLIB) += phy/
-obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
-obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
-obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
-
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
@@ -160,7 +156,6 @@ obj-$(CONFIG_DNET) += dnet.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_S6GMAC) += s6gmac.o
-obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_TR) += tokenring/
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
deleted file mode 100644
index 39e1c0d..0000000
--- a/drivers/net/arm/Kconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-# Acorn Network device configuration
-# These are for Acorn's Expansion card network interfaces
-#
-config ARM_AM79C961A
- bool "ARM EBSA110 AM79C961A support"
- depends on ARM && ARCH_EBSA110
- select CRC32
- help
- If you wish to compile a kernel for the EBSA-110, then you should
- always answer Y to this.
-
-config ARM_ETHER1
- tristate "Acorn Ether1 support"
- depends on ARM && ARCH_ACORN
- help
- If you have an Acorn system with one of these (AKA25) network cards,
- you should say Y to this option if you wish to use it with Linux.
-
-config ARM_ETHER3
- tristate "Acorn/ANT Ether3 support"
- depends on ARM && ARCH_ACORN
- help
- If you have an Acorn system with one of these network cards, you
- should say Y to this option if you wish to use it with Linux.
-
-config ARM_ETHERH
- tristate "I-cubed EtherH/ANT EtherM support"
- depends on ARM && ARCH_ACORN
- select CRC32
- help
- If you have an Acorn system with one of these network cards, you
- should say Y to this option if you wish to use it with Linux.
-
-config ARM_AT91_ETHER
- tristate "AT91RM9200 Ethernet support"
- depends on ARM && ARCH_AT91RM9200
- select MII
- help
- If you wish to compile a kernel for the AT91RM9200 and enable
- ethernet support, then you should always answer Y to this.
-
-config ARM_KS8695_ETHER
- tristate "KS8695 Ethernet support"
- depends on ARM && ARCH_KS8695
- select MII
- help
- If you wish to compile a kernel for the KS8695 and want to
- use the internal ethernet then you should answer Y to this.
-
-config EP93XX_ETH
- tristate "EP93xx Ethernet support"
- depends on ARM && ARCH_EP93XX
- select MII
- help
- This is a driver for the ethernet hardware included in EP93xx CPUs.
- Say Y if you are building a kernel for EP93xx based devices.
-
-config IXP4XX_ETH
- tristate "Intel IXP4xx Ethernet support"
- depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
- select PHYLIB
- help
- Say Y here if you want to use built-in Ethernet ports
- on IXP4xx processor.
-
-config W90P910_ETH
- tristate "Nuvoton w90p910 Ethernet support"
- depends on ARM && ARCH_W90X900
- select PHYLIB
- select MII
- help
- Say Y here if you want to use built-in Ethernet ports
- on w90p910 processor.
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 4daf50d..76fcaae 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -14,6 +14,7 @@ if ETHERNET
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/apple/Kconfig"
+source "drivers/net/ethernet/arm/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 2bce3e6..0bdb3ed 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
+obj-$(CONFIG_NET_ARM) += arm/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
diff --git a/drivers/net/ethernet/arm/Kconfig b/drivers/net/ethernet/arm/Kconfig
new file mode 100644
index 0000000..73e66b7
--- /dev/null
+++ b/drivers/net/ethernet/arm/Kconfig
@@ -0,0 +1,120 @@
+#
+# ARM/Acorn Network device configuration
+#
+
+config NET_ARM
+ bool "ARM devices"
+ depends on ARM
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y.
+ Make sure you know the name of your card. Read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ If unsure, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the remaining ARM network card questions. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+config ARM_AM79C961A
+ bool "ARM EBSA110 AM79C961A support"
+ depends on NET_ARM && ARM && ARCH_EBSA110
+ select CRC32
+ ---help---
+ If you wish to compile a kernel for the EBSA-110, then you should
+ always answer Y to this.
+
+config ARM_ETHER1
+ tristate "Acorn Ether1 support"
+ depends on NET_ARM && ARM && ARCH_ACORN
+ ---help---
+ If you have an Acorn system with one of these (AKA25) network cards,
+ you should say Y to this option if you wish to use it with Linux.
+
+config ARM_ETHER3
+ tristate "Acorn/ANT Ether3 support"
+ depends on NET_ARM && ARM && ARCH_ACORN
+ ---help---
+ If you have an Acorn system with one of these network cards, you
+ should say Y to this option if you wish to use it with Linux.
+
+config ARM_AT91_ETHER
+ tristate "AT91RM9200 Ethernet support"
+ depends on NET_ARM && ARM && ARCH_AT91RM9200
+ select MII
+ ---help---
+ If you wish to compile a kernel for the AT91RM9200 and enable
+ ethernet support, then you should always answer Y to this.
+
+config EP93XX_ETH
+ tristate "EP93xx Ethernet support"
+ depends on NET_ARM && ARM && ARCH_EP93XX
+ select MII
+ ---help---
+ This is a driver for the ethernet hardware included in EP93xx CPUs.
+ Say Y if you are building a kernel for EP93xx based devices.
+
+config ARM_ETHERH
+ tristate "I-cubed EtherH/ANT EtherM support"
+ depends on NET_ARM && ARM && ARCH_ACORN
+ select CRC32
+ ---help---
+ If you have an Acorn system with one of these network cards, you
+ should say Y to this option if you wish to use it with Linux.
+
+config IXP4XX_ETH
+ tristate "Intel IXP4xx Ethernet support"
+ depends on NET_ARM && ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+ select PHYLIB
+ ---help---
+ Say Y here if you want to use built-in Ethernet ports
+ on IXP4xx processor.
+
+config ARM_KS8695_ETHER
+ tristate "KS8695 Ethernet support"
+ depends on NET_ARM && ARM && ARCH_KS8695
+ select MII
+ ---help---
+ If you wish to compile a kernel for the KS8695 and want to
+ use the internal ethernet then you should answer Y to this.
+
+config W90P910_ETH
+ tristate "Nuvoton w90p910 Ethernet support"
+ depends on NET_ARM && ARM && ARCH_W90X900
+ select PHYLIB
+ select MII
+ ---help---
+ Say Y here if you want to use built-in Ethernet ports
+ on w90p910 processor.
+
+config TI_DAVINCI_EMAC
+ tristate "TI DaVinci EMAC Support"
+ depends on NET_ARM && ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+ select TI_DAVINCI_MDIO
+ select TI_DAVINCI_CPDMA
+ select PHYLIB
+ ---help---
+ This driver supports TI's DaVinci Ethernet .
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_emac_driver. This is recommended.
+
+config TI_DAVINCI_MDIO
+ tristate "TI DaVinci MDIO Support"
+ depends on NET_ARM && ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+ select PHYLIB
+ ---help---
+ This driver supports TI's DaVinci MDIO module.
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_mdio. This is recommended.
+
+config TI_DAVINCI_CPDMA
+ tristate "TI DaVinci CPDMA Support"
+ depends on NET_ARM && ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+ ---help---
+ This driver supports TI's DaVinci CPDMA dma engine.
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_cpdma. This is recommended.
diff --git a/drivers/net/arm/Makefile b/drivers/net/ethernet/arm/Makefile
similarity index 74%
rename from drivers/net/arm/Makefile
rename to drivers/net/ethernet/arm/Makefile
index 303171f..f2fb6ad 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/ethernet/arm/Makefile
@@ -1,4 +1,3 @@
-# File: drivers/net/arm/Makefile
#
# Makefile for the ARM network device drivers
#
@@ -12,3 +11,6 @@ obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
+obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
+obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
+obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/ethernet/arm/am79c961a.c
similarity index 100%
rename from drivers/net/arm/am79c961a.c
rename to drivers/net/ethernet/arm/am79c961a.c
diff --git a/drivers/net/arm/am79c961a.h b/drivers/net/ethernet/arm/am79c961a.h
similarity index 100%
rename from drivers/net/arm/am79c961a.h
rename to drivers/net/ethernet/arm/am79c961a.h
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/ethernet/arm/at91_ether.c
similarity index 100%
rename from drivers/net/arm/at91_ether.c
rename to drivers/net/ethernet/arm/at91_ether.c
diff --git a/drivers/net/arm/at91_ether.h b/drivers/net/ethernet/arm/at91_ether.h
similarity index 100%
rename from drivers/net/arm/at91_ether.h
rename to drivers/net/ethernet/arm/at91_ether.h
diff --git a/drivers/net/davinci_cpdma.c b/drivers/net/ethernet/arm/davinci_cpdma.c
similarity index 100%
rename from drivers/net/davinci_cpdma.c
rename to drivers/net/ethernet/arm/davinci_cpdma.c
diff --git a/drivers/net/davinci_cpdma.h b/drivers/net/ethernet/arm/davinci_cpdma.h
similarity index 100%
rename from drivers/net/davinci_cpdma.h
rename to drivers/net/ethernet/arm/davinci_cpdma.h
diff --git a/drivers/net/davinci_emac.c b/drivers/net/ethernet/arm/davinci_emac.c
similarity index 100%
rename from drivers/net/davinci_emac.c
rename to drivers/net/ethernet/arm/davinci_emac.c
diff --git a/drivers/net/davinci_mdio.c b/drivers/net/ethernet/arm/davinci_mdio.c
similarity index 100%
rename from drivers/net/davinci_mdio.c
rename to drivers/net/ethernet/arm/davinci_mdio.c
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/ethernet/arm/ep93xx_eth.c
similarity index 100%
rename from drivers/net/arm/ep93xx_eth.c
rename to drivers/net/ethernet/arm/ep93xx_eth.c
diff --git a/drivers/net/arm/ether1.c b/drivers/net/ethernet/arm/ether1.c
similarity index 100%
rename from drivers/net/arm/ether1.c
rename to drivers/net/ethernet/arm/ether1.c
diff --git a/drivers/net/arm/ether1.h b/drivers/net/ethernet/arm/ether1.h
similarity index 100%
rename from drivers/net/arm/ether1.h
rename to drivers/net/ethernet/arm/ether1.h
diff --git a/drivers/net/arm/ether3.c b/drivers/net/ethernet/arm/ether3.c
similarity index 100%
rename from drivers/net/arm/ether3.c
rename to drivers/net/ethernet/arm/ether3.c
diff --git a/drivers/net/arm/ether3.h b/drivers/net/ethernet/arm/ether3.h
similarity index 100%
rename from drivers/net/arm/ether3.h
rename to drivers/net/ethernet/arm/ether3.h
diff --git a/drivers/net/arm/etherh.c b/drivers/net/ethernet/arm/etherh.c
similarity index 100%
rename from drivers/net/arm/etherh.c
rename to drivers/net/ethernet/arm/etherh.c
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/ethernet/arm/ixp4xx_eth.c
similarity index 100%
rename from drivers/net/arm/ixp4xx_eth.c
rename to drivers/net/ethernet/arm/ixp4xx_eth.c
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/ethernet/arm/ks8695net.c
similarity index 100%
rename from drivers/net/arm/ks8695net.c
rename to drivers/net/ethernet/arm/ks8695net.c
diff --git a/drivers/net/arm/ks8695net.h b/drivers/net/ethernet/arm/ks8695net.h
similarity index 100%
rename from drivers/net/arm/ks8695net.h
rename to drivers/net/ethernet/arm/ks8695net.h
diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/ethernet/arm/w90p910_ether.c
similarity index 100%
rename from drivers/net/arm/w90p910_ether.c
rename to drivers/net/ethernet/arm/w90p910_ether.c
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists