| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1309010363-22750-30-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Sat, 25 Jun 2011 06:58:40 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
Bjorn Ekwall <bj0rn@...x.se>, Donald Becker <becker@...ld.com>,
Edward Peng <edward_peng@...nk.com.tw>
Subject: [RFC 29/72] de6*/dl2k: Move the D-Link drivers
Move the D-Link drivers into drivers/net/ethernet/dlink/ and
make the necessary Kconfig and Makefile changes.
CC: Bjorn Ekwall <bj0rn@...x.se>
CC: Donald Becker <becker@...ld.com>
CC: Edward Peng <edward_peng@...nk.com.tw>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/Kconfig | 44 ----------------------
drivers/net/Makefile | 3 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/dlink/Kconfig | 60 ++++++++++++++++++++++++++++++
drivers/net/ethernet/dlink/Makefile | 7 +++
drivers/net/{ => ethernet/dlink}/de600.c | 0
drivers/net/{ => ethernet/dlink}/de600.h | 0
drivers/net/{ => ethernet/dlink}/de620.c | 0
drivers/net/{ => ethernet/dlink}/de620.h | 0
drivers/net/{ => ethernet/dlink}/dl2k.c | 0
drivers/net/{ => ethernet/dlink}/dl2k.h | 0
12 files changed, 69 insertions(+), 47 deletions(-)
create mode 100644 drivers/net/ethernet/dlink/Kconfig
create mode 100644 drivers/net/ethernet/dlink/Makefile
rename drivers/net/{ => ethernet/dlink}/de600.c (100%)
rename drivers/net/{ => ethernet/dlink}/de600.h (100%)
rename drivers/net/{ => ethernet/dlink}/de620.c (100%)
rename drivers/net/{ => ethernet/dlink}/de620.h (100%)
rename drivers/net/{ => ethernet/dlink}/dl2k.c (100%)
rename drivers/net/{ => ethernet/dlink}/dl2k.h (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 03bf50b..3961949 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -850,36 +850,6 @@ config NET_POCKET
the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
-config DE600
- tristate "D-Link DE600 pocket adapter support"
- depends on NET_POCKET && PARPORT
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:Documentation/networking/DLINK.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, if you want to use
- this. It is possible to have several devices share a single parallel
- port and it is safe to compile the corresponding drivers into the
- kernel.
-
- To compile this driver as a module, choose M here: the module
- will be called de600.
-
-config DE620
- tristate "D-Link DE620 pocket adapter support"
- depends on NET_POCKET && PARPORT
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:Documentation/networking/DLINK.txt> as well as the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, if you want to use
- this. It is possible to have several devices share a single parallel
- port and it is safe to compile the corresponding drivers into the
- kernel.
-
- To compile this driver as a module, choose M here: the module
- will be called de620.
-
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
depends on SGI_HAS_SEEQ
@@ -979,20 +949,6 @@ menuconfig NETDEV_1000
if NETDEV_1000
-config DL2K
- tristate "DL2000/TC902x-based Gigabit Ethernet support"
- depends on PCI
- select CRC32
- help
- This driver supports DL2000/TC902x-based Gigabit ethernet cards,
- which includes
- D-Link DGE-550T Gigabit Ethernet Adapter.
- D-Link DL2000-based Gigabit Ethernet Adapter.
- Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
-
- To compile this driver as a module, choose M here: the
- module will be called dl2k.
-
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 74beb4a..8cdf289 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -104,8 +104,6 @@ obj-$(CONFIG_DUMMY) += dummy.o
obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_DE600) += de600.o
-obj-$(CONFIG_DE620) += de620.o
obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
@@ -137,7 +135,6 @@ obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
-obj-$(CONFIG_DL2K) += dl2k.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 3613d2d..b665c32 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -19,6 +19,7 @@ source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/dlink/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/faraday/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index c1b6275..e3c7243 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
+obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
new file mode 100644
index 0000000..a4f51b7
--- /dev/null
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -0,0 +1,60 @@
+#
+# D-Link device configuration
+#
+
+config NET_VENDOR_DLINK
+ bool "D-Link devices"
+ depends on PCI || PARPORT
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about D-Link devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+config DE600
+ tristate "D-Link DE600 pocket adapter support"
+ depends on NET_VENDOR_DLINK && PARPORT
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de600.
+
+config DE620
+ tristate "D-Link DE620 pocket adapter support"
+ depends on NET_VENDOR_DLINK && PARPORT
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:Documentation/networking/DLINK.txt> as well as the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, if you want to use
+ this. It is possible to have several devices share a single parallel
+ port and it is safe to compile the corresponding drivers into the
+ kernel.
+
+ To compile this driver as a module, choose M here: the module
+ will be called de620.
+
+config DL2K
+ tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ depends on NET_VENDOR_DLINK && PCI
+ select CRC32
+ ---help---
+ This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+ which includes
+ D-Link DGE-550T Gigabit Ethernet Adapter.
+ D-Link DL2000-based Gigabit Ethernet Adapter.
+ Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dl2k.
diff --git a/drivers/net/ethernet/dlink/Makefile b/drivers/net/ethernet/dlink/Makefile
new file mode 100644
index 0000000..7ab33bc
--- /dev/null
+++ b/drivers/net/ethernet/dlink/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the D-Link network device drivers.
+#
+
+obj-$(CONFIG_DE600) += de600.o
+obj-$(CONFIG_DE620) += de620.o
+obj-$(CONFIG_DL2K) += dl2k.o
diff --git a/drivers/net/de600.c b/drivers/net/ethernet/dlink/de600.c
similarity index 100%
rename from drivers/net/de600.c
rename to drivers/net/ethernet/dlink/de600.c
diff --git a/drivers/net/de600.h b/drivers/net/ethernet/dlink/de600.h
similarity index 100%
rename from drivers/net/de600.h
rename to drivers/net/ethernet/dlink/de600.h
diff --git a/drivers/net/de620.c b/drivers/net/ethernet/dlink/de620.c
similarity index 100%
rename from drivers/net/de620.c
rename to drivers/net/ethernet/dlink/de620.c
diff --git a/drivers/net/de620.h b/drivers/net/ethernet/dlink/de620.h
similarity index 100%
rename from drivers/net/de620.h
rename to drivers/net/ethernet/dlink/de620.h
diff --git a/drivers/net/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
similarity index 100%
rename from drivers/net/dl2k.c
rename to drivers/net/ethernet/dlink/dl2k.c
diff --git a/drivers/net/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
similarity index 100%
rename from drivers/net/dl2k.h
rename to drivers/net/ethernet/dlink/dl2k.h
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists