| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 27 Jun 2011 15:50:44 +0200 From: Kurt Van Dijck <kurt.van.dijck@....be> To: Marc Kleine-Budde <mkl@...gutronix.de> Cc: davem@...emloft.net, netdev@...r.kernel.org, socketcan-users@...ts.berlios.de, wg@...ndegger.com Subject: Re: [Socketcan-users] [PATCH] net/can: activate bit-timing calculation and netlink based drivers by default Is this modification then also the right thing to do? diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 1d699e3..ac48574 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -4,7 +4,6 @@ menu "CAN Device Drivers" config CAN_VCAN tristate "Virtual Local CAN Interface (vcan)" depends on CAN - default N ---help--- Similar to the network loopback devices, vcan offers a virtual local CAN interface. @@ -15,7 +14,6 @@ config CAN_VCAN config CAN_SLCAN tristate "Serial / USB serial CAN Adaptors (slcan)" depends on CAN - default N ---help--- CAN driver for several 'low cost' CAN interfaces that are attached via serial lines or via USB-to-serial adapters using the LAWICEL @@ -124,7 +122,6 @@ source "drivers/net/can/softing/Kconfig" config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN - default N ---help--- Say Y here if you want the CAN device drivers to produce a bunch of debug messages to the system log. Select this if you are having -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists