| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110628035727.GA23979@myri.com>
Date: Mon, 27 Jun 2011 22:57:28 -0500
From: Jon Mason <mason@...i.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, Andrew Gallatin <gallatin@...i.com>
Subject: [PATCH 3/9 v3] myri10ge: rework parity error check and cleanup
Clean up watchdog reset code:
- move code that checks for stuck slice to a common routine
- unless there is a confirmed h/w fault, verify that a stuck
slice is still stuck in the watchdog worker; if the slice is no
longer stuck, abort the reset.
- this removes an egregious 2000ms pause in the watchdog worker that
was a diagnostic aid (to look for spurious resets) the snuck into
production code.
v3 includes corrections from Joe Perches
Signed-off-by: Jon Mason <mason@...i.com>
---
drivers/net/myri10ge/myri10ge.c | 100 +++++++++++++++++++++++---------------
1 files changed, 60 insertions(+), 40 deletions(-)
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 0f0f83d..ca03457 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -193,6 +193,7 @@ struct myri10ge_slice_state {
int watchdog_tx_done;
int watchdog_tx_req;
int watchdog_rx_done;
+ int stuck;
#ifdef CONFIG_MYRI10GE_DCA
int cached_dca_tag;
int cpu;
@@ -3442,6 +3443,42 @@ static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
return reboot;
}
+static void
+myri10ge_check_slice(struct myri10ge_slice_state *ss, int *reset_needed,
+ int *busy_slice_cnt, u32 rx_pause_cnt)
+{
+ struct myri10ge_priv *mgp = ss->mgp;
+ int slice = ss - mgp->ss;
+
+ if (ss->tx.req != ss->tx.done &&
+ ss->tx.done == ss->watchdog_tx_done &&
+ ss->watchdog_tx_req != ss->watchdog_tx_done) {
+ /* nic seems like it might be stuck.. */
+ if (rx_pause_cnt != mgp->watchdog_pause) {
+ if (net_ratelimit())
+ netdev_warn(mgp->dev, "slice %d: TX paused, "
+ "check link partner\n", slice);
+ } else {
+ netdev_warn(mgp->dev,
+ "slice %d: TX stuck %d %d %d %d %d %d\n",
+ slice, ss->tx.queue_active, ss->tx.req,
+ ss->tx.done, ss->tx.pkt_start,
+ ss->tx.pkt_done,
+ (int)ntohl(mgp->ss[slice].fw_stats->
+ send_done_count));
+ *reset_needed = 1;
+ ss->stuck = 1;
+ }
+ }
+ if (ss->watchdog_tx_done != ss->tx.done ||
+ ss->watchdog_rx_done != ss->rx_done.cnt) {
+ *busy_slice_cnt += 1;
+ }
+ ss->watchdog_tx_done = ss->tx.done;
+ ss->watchdog_tx_req = ss->tx.req;
+ ss->watchdog_rx_done = ss->rx_done.cnt;
+}
+
/*
* This watchdog is used to check whether the board has suffered
* from a parity error and needs to be recovered.
@@ -3450,10 +3487,12 @@ static void myri10ge_watchdog(struct work_struct *work)
{
struct myri10ge_priv *mgp =
container_of(work, struct myri10ge_priv, watchdog_work);
- struct myri10ge_tx_buf *tx;
- u32 reboot;
+ struct myri10ge_slice_state *ss;
+ u32 reboot, rx_pause_cnt;
int status, rebooted;
int i;
+ int reset_needed = 0;
+ int busy_slice_cnt = 0;
u16 cmd, vendor;
mgp->watchdog_resets++;
@@ -3465,8 +3504,7 @@ static void myri10ge_watchdog(struct work_struct *work)
* For now, just report it */
reboot = myri10ge_read_reboot(mgp);
netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
- reboot,
- myri10ge_reset_recover ? "" : " not");
+ reboot, myri10ge_reset_recover ? "" : " not");
if (myri10ge_reset_recover == 0)
return;
rtnl_lock();
@@ -3498,23 +3536,24 @@ static void myri10ge_watchdog(struct work_struct *work)
return;
}
}
- /* Perhaps it is a software error. Try to reset */
-
- netdev_err(mgp->dev, "device timeout, resetting\n");
+ /* Perhaps it is a software error. See if stuck slice
+ * has recovered, reset if not */
+ rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
for (i = 0; i < mgp->num_slices; i++) {
- tx = &mgp->ss[i].tx;
- netdev_err(mgp->dev, "(%d): %d %d %d %d %d %d\n",
- i, tx->queue_active, tx->req,
- tx->done, tx->pkt_start, tx->pkt_done,
- (int)ntohl(mgp->ss[i].fw_stats->
- send_done_count));
- msleep(2000);
- netdev_info(mgp->dev, "(%d): %d %d %d %d %d %d\n",
- i, tx->queue_active, tx->req,
- tx->done, tx->pkt_start, tx->pkt_done,
- (int)ntohl(mgp->ss[i].fw_stats->
- send_done_count));
+ ss = mgp->ss;
+ if (ss->stuck) {
+ myri10ge_check_slice(ss, &reset_needed,
+ &busy_slice_cnt,
+ rx_pause_cnt);
+ ss->stuck = 0;
+ }
}
+ if (!reset_needed) {
+ netdev_dbg(mgp->dev, "not resetting\n");
+ return;
+ }
+
+ netdev_err(mgp->dev, "device timeout, resetting\n");
}
if (!rebooted) {
@@ -3567,27 +3606,8 @@ static void myri10ge_watchdog_timer(unsigned long arg)
myri10ge_fill_thresh)
ss->rx_big.watchdog_needed = 0;
}
-
- if (ss->tx.req != ss->tx.done &&
- ss->tx.done == ss->watchdog_tx_done &&
- ss->watchdog_tx_req != ss->watchdog_tx_done) {
- /* nic seems like it might be stuck.. */
- if (rx_pause_cnt != mgp->watchdog_pause) {
- if (net_ratelimit())
- netdev_err(mgp->dev, "slice %d: TX paused, check link partner\n",
- i);
- } else {
- netdev_warn(mgp->dev, "slice %d stuck:", i);
- reset_needed = 1;
- }
- }
- if (ss->watchdog_tx_done != ss->tx.done ||
- ss->watchdog_rx_done != ss->rx_done.cnt) {
- busy_slice_cnt++;
- }
- ss->watchdog_tx_done = ss->tx.done;
- ss->watchdog_tx_req = ss->tx.req;
- ss->watchdog_rx_done = ss->rx_done.cnt;
+ myri10ge_check_slice(ss, &reset_needed, &busy_slice_cnt,
+ rx_pause_cnt);
}
/* if we've sent or received no traffic, poll the NIC to
* ensure it is still there. Otherwise, we risk not noticing
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists