| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1309859095-32031-3-git-send-email-hayeswang@realtek.com>
Date: Tue, 5 Jul 2011 17:44:52 +0800
From: Hayes Wang <hayeswang@...ltek.com>
To: <romieu@...zoreil.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Hayes Wang <hayeswang@...ltek.com>
Subject: [PATCH net-next 3/6] r8169: adjust the settings about RxConfig
Set the init value before reset in probe function. And then just
modify the relative bits and keep the init settings.
Signed-off-by: Hayes Wang <hayeswang@...ltek.com>
---
drivers/net/r8169.c | 63 +++++++++++++++++++++++++++++++++++++-------------
1 files changed, 46 insertions(+), 17 deletions(-)
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index cdbbe47..3aeae68 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -71,7 +71,7 @@ static const int multicast_filter_limit = 32;
#define MAX_READ_REQUEST_SHIFT 12
#define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */
-#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
+#define RX_DMA_BURST 7 /* Maximum PCI burst, '7' is Unlimited */
#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
#define SafeMtu 0x1c20 /* ... actually life sucks beyond ~7k */
#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */
@@ -272,9 +272,6 @@ enum rtl_registers {
IntrStatus = 0x3e,
TxConfig = 0x40,
RxConfig = 0x44,
-
-#define RTL_RX_CONFIG_MASK 0xff7e1880u
-
RxMissed = 0x4c,
Cfg9346 = 0x50,
Config0 = 0x51,
@@ -727,10 +724,6 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu);
static void rtl8169_down(struct net_device *dev);
static void rtl8169_rx_clear(struct rtl8169_private *tp);
static int rtl8169_poll(struct napi_struct *napi, int budget);
-
-static const unsigned int rtl8169_rx_config =
- (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
-
static void rtl8169_init_ring_indexes(struct rtl8169_private *tp);
static u32 ocp_read(struct rtl8169_private *tp, u8 mask, u16 reg)
@@ -3337,6 +3330,45 @@ static void __devinit rtl_init_pll_power_ops(struct rtl8169_private *tp)
}
}
+static void rtl_init_rxcfg(struct rtl8169_private *tp)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_01:
+ case RTL_GIGA_MAC_VER_02:
+ case RTL_GIGA_MAC_VER_03:
+ case RTL_GIGA_MAC_VER_04:
+ case RTL_GIGA_MAC_VER_05:
+ case RTL_GIGA_MAC_VER_06:
+ case RTL_GIGA_MAC_VER_10:
+ case RTL_GIGA_MAC_VER_11:
+ case RTL_GIGA_MAC_VER_12:
+ case RTL_GIGA_MAC_VER_13:
+ case RTL_GIGA_MAC_VER_14:
+ case RTL_GIGA_MAC_VER_15:
+ case RTL_GIGA_MAC_VER_16:
+ case RTL_GIGA_MAC_VER_17:
+ RTL_W32(RxConfig, (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift));
+ break;
+ case RTL_GIGA_MAC_VER_18:
+ case RTL_GIGA_MAC_VER_19:
+ case RTL_GIGA_MAC_VER_20:
+ case RTL_GIGA_MAC_VER_21:
+ case RTL_GIGA_MAC_VER_22:
+ case RTL_GIGA_MAC_VER_23:
+ case RTL_GIGA_MAC_VER_24:
+ RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN |
+ (RX_DMA_BURST << RxCfgDMAShift));
+ break;
+ default:
+ RTL_W32(RxConfig, RX128_INT_EN |
+ (RX_DMA_BURST << RxCfgDMAShift));
+ break;
+ }
+}
+
static void rtl_hw_reset(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
@@ -3459,6 +3491,11 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!pci_is_pcie(pdev))
netif_info(tp, probe, dev, "not PCI Express\n");
+ /* Identify chip attached to board */
+ rtl8169_get_mac_version(tp, dev, cfg->default_ver);
+
+ rtl_init_rxcfg(tp);
+
RTL_W16(IntrMask, 0x0000);
rtl_hw_reset(tp);
@@ -3467,9 +3504,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_master(pdev);
- /* Identify chip attached to board */
- rtl8169_get_mac_version(tp, dev, cfg->default_ver);
-
/*
* Pretend we are using VLANs; This bypasses a nasty bug where
* Interrupts stop flowing on high load on 8110SCd controllers.
@@ -3770,10 +3804,6 @@ static void rtl8169_hw_reset(struct rtl8169_private *tp)
static void rtl_set_rx_tx_config_registers(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
- u32 cfg = rtl8169_rx_config;
-
- cfg |= (RTL_R32(RxConfig) & RTL_RX_CONFIG_MASK);
- RTL_W32(RxConfig, cfg);
/* Set DMA burst size and Interframe Gap Time */
RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
@@ -5343,8 +5373,7 @@ static void rtl_set_rx_mode(struct net_device *dev)
spin_lock_irqsave(&tp->lock, flags);
- tmp = rtl8169_rx_config | rx_mode |
- (RTL_R32(RxConfig) & RTL_RX_CONFIG_MASK);
+ tmp = RTL_R32(RxConfig) | rx_mode;
if (tp->mac_version > RTL_GIGA_MAC_VER_06) {
u32 data = mc_filter[0];
--
1.7.3.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists