netdev - Re: [PATCH] net/fec: gasket needs to be enabled for some i.mx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sat, 9 Jul 2011 13:45:26 +0800
From:	Shawn Guo <shawn.guo@...escale.com>
To:	Troy Kisky <troy.kisky@...ndarydevices.com>
CC:	Shawn Guo <shawn.guo@...aro.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	<netdev@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
	<u.kleine-koenig@...gutronix.de>, <LW@...O-electronics.de>,
	"David S. Miller" <davem@...emloft.net>
Subject: Re: [PATCH] net/fec: gasket needs to be enabled for some i.mx

On Fri, Jul 08, 2011 at 11:38:09AM -0700, Troy Kisky wrote:
> On 7/8/2011 3:18 AM, Sascha Hauer wrote:
> > On Fri, Jul 01, 2011 at 06:11:22PM +0800, Shawn Guo wrote:
> >> On the recent i.mx (mx25/50/53), there is a gasket inside fec
> >> controller which needs to be enabled no matter phy works in MII
> >> or RMII mode.
> >>
> >> The current code enables the gasket only when phy interface is RMII.
> >> It's broken when the driver works with a MII phy.  The patch uses
> >> platform_device_id to distinguish the SoCs that have the gasket and
> >> enables it on these SoCs for both MII and RMII mode.
> >>
> >> Signed-off-by: Troy Kisky <troy.kisky@...ndarydevices.com>
> 
> While you're making changes, you can change this to
> Reported-by: Troy Kisky
> 
Ok.

-- 
Regards,
Shawn

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html