| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 11 Jul 2011 19:15:13 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Carolyn Wyborny <carolyn.wyborny@...el.com>,
netdev@...r.kernel.org, gospo@...hat.com, sassmann@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 3/4] igb: Add support of SerDes Forced mode for certain hardware
From: Carolyn Wyborny <carolyn.wyborny@...el.com>
This patch changes the serdes link code to support a forced mode for
some hardware, based on bit set in EEPROM.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@...el.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/igb/e1000_82575.c | 19 +++++++++++++++++--
drivers/net/igb/e1000_82575.h | 2 ++
drivers/net/igb/e1000_defines.h | 5 +++--
3 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index 7b7e157..c0857bd 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -1156,10 +1156,13 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
{
u32 ctrl_ext, ctrl_reg, reg;
bool pcs_autoneg;
+ s32 ret_val = E1000_SUCCESS;
+ u16 data;
if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
!igb_sgmii_active_82575(hw))
- return 0;
+ return ret_val;
+
/*
* On the 82575, SerDes loopback mode persists until it is
@@ -1203,6 +1206,18 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
/* disable PCS autoneg and support parallel detect only */
pcs_autoneg = false;
default:
+ if (hw->mac.type == e1000_82575 ||
+ hw->mac.type == e1000_82576) {
+ ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
+ if (ret_val) {
+ printk(KERN_DEBUG "NVM Read Error\n\n");
+ return ret_val;
+ }
+
+ if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT)
+ pcs_autoneg = false;
+ }
+
/*
* non-SGMII modes only supports a speed of 1000/Full for the
* link so it is best to just force the MAC and let the pcs
@@ -1250,7 +1265,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
if (!igb_sgmii_active_82575(hw))
igb_force_mac_fc(hw);
- return 0;
+ return ret_val;
}
/**
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index fd28d62..786e110 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -243,6 +243,8 @@ struct e1000_adv_tx_context_desc {
#define E1000_DTXCTL_MDP_EN 0x0020
#define E1000_DTXCTL_SPOOF_INT 0x0040
+#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT (1 << 14)
+
#define ALL_QUEUES 0xFFFF
/* RX packet buffer size defines */
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index 446eb5c..2cd4082 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -437,6 +437,7 @@
#define E1000_RAH_POOL_1 0x00040000
/* Error Codes */
+#define E1000_SUCCESS 0
#define E1000_ERR_NVM 1
#define E1000_ERR_PHY 2
#define E1000_ERR_CONFIG 3
@@ -587,8 +588,8 @@
#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
/* NVM Word Offsets */
-#define NVM_ID_LED_SETTINGS 0x0004
-/* For SERDES output amplitude adjustment. */
+#define NVM_COMPAT 0x0003
+#define NVM_ID_LED_SETTINGS 0x0004 /* SERDES output amplitude */
#define NVM_INIT_CONTROL2_REG 0x000F
#define NVM_INIT_CONTROL3_PORT_B 0x0014
#define NVM_INIT_CONTROL3_PORT_A 0x0024
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists