lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 20 Jul 2011 16:54:03 +0200
From:	Jiri Pirko <jpirko@...hat.com>
To:	netdev@...r.kernel.org
Cc:	davem@...emloft.net, shemminger@...ux-foundation.org,
	eric.dumazet@...il.com, greearb@...delatech.com, mirqus@...il.com,
	Sebastian Poehn <sebastian.poehn@...den.com>
Subject: [patch net-next-2.6 01/47] gianfar: rx parser

Only let the rx parser be enabled if it is necessary (if VLAN extraction,
IP or TCP checksumming or the rx queue filer are enabled). Otherwise
disable it.

The new routine gfar_check_rx_parser_mode should be run after every
change on this features and will enable/disable the parser as necessary.

Signed-off-by: Jiri Pirko <jpirko@...hat.com>
Signed-off-by: Sebastian Poehn <sebastian.poehn@...den.com>
---
 drivers/net/gianfar.c |   24 +++++++++++++++++++-----
 drivers/net/gianfar.h |    3 ++-
 2 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 3321d71..d265c6e 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -2287,6 +2287,23 @@ static int gfar_set_mac_address(struct net_device *dev)
 	return 0;
 }
 
+/* Check if rx parser should be activated */
+void gfar_check_rx_parser_mode(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs;
+	u32 tempval;
+
+	regs = priv->gfargrp[0].regs;
+
+	tempval = gfar_read(&regs->rctrl);
+	/* If parse is no longer required, then disable parser */
+	if (tempval & RCTRL_REQ_PARSER)
+		tempval |= RCTRL_PRSDEP_INIT;
+	else
+		tempval &= ~RCTRL_PRSDEP_INIT;
+	gfar_write(&regs->rctrl, tempval);
+}
+
 
 /* Enables and disables VLAN insertion/extraction */
 static void gfar_vlan_rx_register(struct net_device *dev,
@@ -2323,12 +2340,9 @@ static void gfar_vlan_rx_register(struct net_device *dev,
 		/* Disable VLAN tag extraction */
 		tempval = gfar_read(&regs->rctrl);
 		tempval &= ~RCTRL_VLEX;
-		/* If parse is no longer required, then disable parser */
-		if (tempval & RCTRL_REQ_PARSER)
-			tempval |= RCTRL_PRSDEP_INIT;
-		else
-			tempval &= ~RCTRL_PRSDEP_INIT;
 		gfar_write(&regs->rctrl, tempval);
+
+		gfar_check_rx_parser_mode(priv);
 	}
 
 	gfar_change_mtu(dev, dev->mtu);
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 27499c6..87c1d86 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -286,7 +286,7 @@ extern const char gfar_driver_version[];
 #define RCTRL_PROM		0x00000008
 #define RCTRL_EMEN		0x00000002
 #define RCTRL_REQ_PARSER	(RCTRL_VLEX | RCTRL_IPCSEN | \
-				 RCTRL_TUCSEN)
+				 RCTRL_TUCSEN | RCTRL_FILREN)
 #define RCTRL_CHECKSUMMING	(RCTRL_IPCSEN | RCTRL_TUCSEN | \
 				RCTRL_PRSDEP_INIT)
 #define RCTRL_EXTHASH		(RCTRL_GHTX)
@@ -1182,6 +1182,7 @@ extern void gfar_configure_coalescing(struct gfar_private *priv,
 		unsigned long tx_mask, unsigned long rx_mask);
 void gfar_init_sysfs(struct net_device *dev);
 int gfar_set_features(struct net_device *dev, u32 features);
+extern void gfar_check_rx_parser_mode(struct gfar_private *priv);
 
 extern const struct ethtool_ops gfar_ethtool_ops;
 
-- 
1.7.6

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists