| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1312050360-15767-1-git-send-email-shawn.guo@linaro.org>
Date: Sun, 31 Jul 2011 02:26:00 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: netdev@...r.kernel.org
Cc: devicetree-discuss@...ts.ozlabs.org,
linux-arm-kernel@...ts.infradead.org, patches@...aro.org,
Shawn Guo <shawn.guo@...aro.org>,
Grant Likely <grant.likely@...retlab.ca>,
Steve Glendinning <steve.glendinning@...c.com>,
"David S. Miller" <davem@...emloft.net>
Subject: [PATCH v3] net/smsc911x: add device tree probe support
It adds device tree probe support for smsc911x driver.
Signed-off-by: Shawn Guo <shawn.guo@...aro.org>
Cc: Grant Likely <grant.likely@...retlab.ca>
Cc: Steve Glendinning <steve.glendinning@...c.com>
Cc: David S. Miller <davem@...emloft.net>
Reviewed-by: Grant Likely <grant.likely@...retlab.ca>
---
Changes since v2:
* Fix a typo in smsc911x.txt
Changes since v1:
* Instead of getting irq line from gpio number, it use irq domain
to keep platform_get_resource(IORESOURCE_IRQ) works for dt too.
* Use 'lan9115' the first model that smsc911x supports in the match
table
* Use reg-shift and reg-io-width which already used in of_serial for
shift and access size binding
Documentation/devicetree/bindings/net/smsc911x.txt | 38 +++++++++
drivers/net/smsc911x.c | 85 +++++++++++++++++---
2 files changed, 112 insertions(+), 11 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/smsc911x.txt
diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt
new file mode 100644
index 0000000..adb5b57
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc911x.txt
@@ -0,0 +1,38 @@
+* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
+
+Required properties:
+- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
+- reg : Address and length of the io space for SMSC LAN
+- interrupts : Should contain SMSC LAN interrupt line
+- interrupt-parent : Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- phy-mode : String, operation mode of the PHY interface.
+ Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
+ "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
+
+Optional properties:
+- reg-shift : Specify the quantity to shift the register offsets by
+- reg-io-width : Specify the size (in bytes) of the IO accesses that
+ should be performed on the device. Valid value for SMSC LAN is
+ 2 or 4. If it's omitted or invalid, the size would be 2.
+- smsc,irq-active-high : Indicates the IRQ polarity is active-high
+- smsc,irq-push-pull : Indicates the IRQ type is push-pull
+- smsc,force-internal-phy : Forces SMSC LAN controller to use
+ internal PHY
+- smsc,force-external-phy : Forces SMSC LAN controller to use
+ external PHY
+- smsc,save-mac-address : Indicates that mac address needs to be saved
+ before resetting the controller
+- local-mac-address : 6 bytes, mac address
+
+Examples:
+
+lan9220@...00000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0xf4000000 0x2000000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio1>;
+ interrupts = <31>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+};
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b9016a3..75c08a5 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -53,6 +53,10 @@
#include <linux/phy.h>
#include <linux/smsc911x.h>
#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_net.h>
#include "smsc911x.h"
#define SMSC_CHIPNAME "smsc911x"
@@ -2095,8 +2099,58 @@ static const struct smsc911x_ops shifted_smsc911x_ops = {
.tx_writefifo = smsc911x_tx_writefifo_shift,
};
+#ifdef CONFIG_OF
+static int __devinit smsc911x_probe_config_dt(
+ struct smsc911x_platform_config *config,
+ struct device_node *np)
+{
+ const char *mac;
+ u32 width = 0;
+
+ if (!np)
+ return -ENODEV;
+
+ config->phy_interface = of_get_phy_mode(np);
+
+ mac = of_get_mac_address(np);
+ if (mac)
+ memcpy(config->mac, mac, ETH_ALEN);
+
+ of_property_read_u32(np, "reg-shift", &config->shift);
+
+ of_property_read_u32(np, "reg-io-width", &width);
+ if (width == 4)
+ config->flags |= SMSC911X_USE_32BIT;
+
+ if (of_get_property(np, "smsc,irq-active-high", NULL))
+ config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
+
+ if (of_get_property(np, "smsc,irq-push-pull", NULL))
+ config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
+
+ if (of_get_property(np, "smsc,force-internal-phy", NULL))
+ config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
+
+ if (of_get_property(np, "smsc,force-external-phy", NULL))
+ config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
+
+ if (of_get_property(np, "smsc,save-mac-address", NULL))
+ config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
+
+ return 0;
+}
+#else
+static inline int smsc911x_probe_config_dt(
+ struct smsc911x_platform_config *config,
+ struct device_node *np)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct net_device *dev;
struct smsc911x_data *pdata;
struct smsc911x_platform_config *config = pdev->dev.platform_data;
@@ -2107,13 +2161,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
pr_info("Driver version %s\n", SMSC_DRV_VERSION);
- /* platform data specifies irq & dynamic bus configuration */
- if (!pdev->dev.platform_data) {
- pr_warn("platform_data not provided\n");
- retval = -ENODEV;
- goto out_0;
- }
-
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"smsc911x-memory");
if (!res)
@@ -2152,9 +2199,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
irq_flags = irq_res->flags & IRQF_TRIGGER_MASK;
pdata->ioaddr = ioremap_nocache(res->start, res_size);
- /* copy config parameters across to pdata */
- memcpy(&pdata->config, config, sizeof(pdata->config));
-
pdata->dev = dev;
pdata->msg_enable = ((1 << debug) - 1);
@@ -2164,10 +2208,22 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
goto out_free_netdev_2;
}
+ retval = smsc911x_probe_config_dt(&pdata->config, np);
+ if (retval && config) {
+ /* copy config parameters across to pdata */
+ memcpy(&pdata->config, config, sizeof(pdata->config));
+ retval = 0;
+ }
+
+ if (retval) {
+ SMSC_WARN(pdata, probe, "Error smsc911x config not found");
+ goto out_unmap_io_3;
+ }
+
/* assume standard, non-shifted, access to HW registers */
pdata->ops = &standard_smsc911x_ops;
/* apply the right access if shifting is needed */
- if (config->shift)
+ if (pdata->config.shift)
pdata->ops = &shifted_smsc911x_ops;
retval = smsc911x_init(dev);
@@ -2314,6 +2370,12 @@ static const struct dev_pm_ops smsc911x_pm_ops = {
#define SMSC911X_PM_OPS NULL
#endif
+static const struct of_device_id smsc911x_dt_ids[] = {
+ { .compatible = "smsc,lan9115", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
+
static struct platform_driver smsc911x_driver = {
.probe = smsc911x_drv_probe,
.remove = __devexit_p(smsc911x_drv_remove),
@@ -2321,6 +2383,7 @@ static struct platform_driver smsc911x_driver = {
.name = SMSC_CHIPNAME,
.owner = THIS_MODULE,
.pm = SMSC911X_PM_OPS,
+ .of_match_table = smsc911x_dt_ids,
},
};
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists