| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1312082850-24914-29-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Sat, 30 Jul 2011 20:26:47 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Realtek linux nic maintainers <nic_swsd@...ltek.com>,
Francois Romieu <romieu@...zoreil.com>,
Jeff Garzik <jgarzik@...ox.com>,
Donald Becker <becker@...ld.com>
Subject: [net-next v2 28/71] 8139*/atp/r8169/sc92031: Move the Realtek drivers
Move the Realtek drivers into drivers/net/ethernet/realtek/ and make
the necessary Kconfig and Makefile changes.
CC: Realtek linux nic maintainers <nic_swsd@...ltek.com>
CC: Francois Romieu <romieu@...zoreil.com>
CC: Jeff Garzik <jgarzik@...ox.com>
CC: Donald Becker <becker@...ld.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
MAINTAINERS | 2 +-
drivers/net/Kconfig | 106 ------------------
drivers/net/Makefile | 5 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/{ => ethernet/realtek}/8139cp.c | 0
drivers/net/{ => ethernet/realtek}/8139too.c | 0
drivers/net/ethernet/realtek/Kconfig | 122 +++++++++++++++++++++
drivers/net/ethernet/realtek/Makefile | 9 ++
drivers/net/{ => ethernet/realtek}/atp.c | 0
drivers/net/{ => ethernet/realtek}/atp.h | 0
drivers/net/{ => ethernet/realtek}/pci-skeleton.c | 0
drivers/net/{ => ethernet/realtek}/r8169.c | 0
drivers/net/{ => ethernet/realtek}/sc92031.c | 0
14 files changed, 134 insertions(+), 112 deletions(-)
rename drivers/net/{ => ethernet/realtek}/8139cp.c (100%)
rename drivers/net/{ => ethernet/realtek}/8139too.c (100%)
create mode 100644 drivers/net/ethernet/realtek/Kconfig
create mode 100644 drivers/net/ethernet/realtek/Makefile
rename drivers/net/{ => ethernet/realtek}/atp.c (100%)
rename drivers/net/{ => ethernet/realtek}/atp.h (100%)
rename drivers/net/{ => ethernet/realtek}/pci-skeleton.c (100%)
rename drivers/net/{ => ethernet/realtek}/r8169.c (100%)
rename drivers/net/{ => ethernet/realtek}/sc92031.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 40eb3ce..486470e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -156,7 +156,7 @@ M: Realtek linux nic maintainers <nic_swsd@...ltek.com>
M: Francois Romieu <romieu@...zoreil.com>
L: netdev@...r.kernel.org
S: Maintained
-F: drivers/net/r8169.c
+F: drivers/net/ethernet/realtek/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
M: Greg Kroah-Hartman <gregkh@...e.de>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8da9f96..42408d7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -594,73 +594,6 @@ config FEALNX
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
cards. <http://www.myson.com.tw/>
-config 8139CP
- tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
- depends on NET_PCI && PCI && EXPERIMENTAL
- select CRC32
- select MII
- help
- This is a driver for the Fast Ethernet PCI network cards based on
- the RTL8139C+ chips. If you have one of those, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the module
- will be called 8139cp. This is recommended.
-
-config 8139TOO
- tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- ---help---
- This is a driver for the Fast Ethernet PCI network cards based on
- the RTL 8129/8130/8139 chips. If you have one of those, say Y and
- read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the module
- will be called 8139too. This is recommended.
-
-config 8139TOO_PIO
- bool "Use PIO instead of MMIO"
- default y
- depends on 8139TOO
- help
- This instructs the driver to use programmed I/O ports (PIO) instead
- of PCI shared memory (MMIO). This can possibly solve some problems
- in case your mainboard has memory consistency issues. If unsure,
- say N.
-
-config 8139TOO_TUNE_TWISTER
- bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
- depends on 8139TOO
- help
- This implements a function which might come in handy in case you
- are using low quality on long cabling. It is required for RealTek
- RTL-8139 revision K boards, and totally unused otherwise. It tries
- to match the transceiver to the cable characteristics. This is
- experimental since hardly documented by the manufacturer.
- If unsure, say Y.
-
-config 8139TOO_8129
- bool "Support for older RTL-8129/8130 boards"
- depends on 8139TOO
- help
- This enables support for the older and uncommon RTL-8129 and
- RTL-8130 chips, which support MII via an external transceiver,
- instead of an internal one. Disabling this option will save some
- memory by making the code size smaller. If unsure, say Y.
-
-config 8139_OLD_RX_RESET
- bool "Use older RX-reset method"
- depends on 8139TOO
- help
- The 8139too driver was recently updated to contain a more rapid
- reset sequence, in the face of severe receive errors. This "new"
- RX-reset method should be adequate for all boards. But if you
- experience problems, you can enable this option to restore the
- old RX-reset behavior. If unsure, say N.
-
config R6040
tristate "RDC R6040 Fast Ethernet Adapter support"
depends on NET_PCI && PCI
@@ -776,18 +709,6 @@ config VIA_RHINE_MMIO
If unsure, say Y.
-config SC92031
- tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
- depends on NET_PCI && PCI && EXPERIMENTAL
- select CRC32
- ---help---
- This is a driver for the Fast Ethernet PCI network cards based on
- the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
- have one of these, say Y here.
-
- To compile this driver as a module, choose M here: the module
- will be called sc92031. This is recommended.
-
config CPMAC
tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
depends on NET_ETHERNET && EXPERIMENTAL && AR7
@@ -819,21 +740,6 @@ config NET_POCKET
the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
-config ATP
- tristate "AT-LAN-TEC/RealTek pocket adapter support"
- depends on NET_POCKET && PARPORT && X86
- select CRC32
- ---help---
- This is a network (Ethernet) device which attaches to your parallel
- port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>, if you
- want to use this. If you intend to use this driver, you should have
- said N to the "Parallel printer support", because the two drivers
- don't like each other.
-
- To compile this driver as a module, choose M here: the module
- will be called atp.
-
config DE600
tristate "D-Link DE600 pocket adapter support"
depends on NET_POCKET && PARPORT
@@ -1006,18 +912,6 @@ config YELLOWFIN
To compile this driver as a module, choose M here: the module
will be called yellowfin. This is recommended.
-config R8169
- tristate "Realtek 8169 gigabit ethernet support"
- depends on PCI
- select FW_LOADER
- select CRC32
- select MII
- ---help---
- Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
-
- To compile this driver as a module, choose M here: the module
- will be called r8169. This is recommended.
-
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 0b341dc..d142fc5 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -112,12 +112,8 @@ obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_8139CP) += 8139cp.o
-obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_EWRK3) += ewrk3.o
-obj-$(CONFIG_ATP) += atp.o
-obj-$(CONFIG_SC92031) += sc92031.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_EQUALIZER) += eql.o
@@ -128,7 +124,6 @@ obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
obj-$(CONFIG_DL2K) += dl2k.o
-obj-$(CONFIG_R8169) += r8169.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 110071e..fecac79 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -32,6 +32,7 @@ source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
+source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
source "drivers/net/ethernet/smsc/Kconfig"
source "drivers/net/ethernet/stmicro/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 4a6edf7..0092c30 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
+obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SFC) += sfc/
obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
diff --git a/drivers/net/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
similarity index 100%
rename from drivers/net/8139cp.c
rename to drivers/net/ethernet/realtek/8139cp.c
diff --git a/drivers/net/8139too.c b/drivers/net/ethernet/realtek/8139too.c
similarity index 100%
rename from drivers/net/8139too.c
rename to drivers/net/ethernet/realtek/8139too.c
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
new file mode 100644
index 0000000..69bff40
--- /dev/null
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -0,0 +1,122 @@
+#
+# Realtek device configuration
+#
+
+config NET_VENDOR_REALTEK
+ bool "Realtek devices"
+ depends on X86 || PCI || PARPORT
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Realtek devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+config ATP
+ tristate "AT-LAN-TEC/RealTek pocket adapter support"
+ depends on NET_VENDOR_REALTEK && PARPORT && X86
+ select CRC32
+ ---help---
+ This is a network (Ethernet) device which attaches to your parallel
+ port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>, if you
+ want to use this. If you intend to use this driver, you should have
+ said N to the "Parallel printer support", because the two drivers
+ don't like each other.
+
+ To compile this driver as a module, choose M here: the module
+ will be called atp.
+
+config 8139CP
+ tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
+ depends on NET_VENDOR_REALTEK && PCI && EXPERIMENTAL
+ select CRC32
+ select MII
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the RTL8139C+ chips. If you have one of those, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8139cp. This is recommended.
+
+config 8139TOO
+ tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
+ depends on NET_VENDOR_REALTEK && PCI
+ select CRC32
+ select MII
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the RTL 8129/8130/8139 chips. If you have one of those, say Y and
+ read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8139too. This is recommended.
+
+config 8139TOO_PIO
+ bool "Use PIO instead of MMIO"
+ default y
+ depends on 8139TOO
+ ---help---
+ This instructs the driver to use programmed I/O ports (PIO) instead
+ of PCI shared memory (MMIO). This can possibly solve some problems
+ in case your mainboard has memory consistency issues. If unsure,
+ say N.
+
+config 8139TOO_TUNE_TWISTER
+ bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
+ depends on 8139TOO
+ ---help---
+ This implements a function which might come in handy in case you
+ are using low quality on long cabling. It is required for RealTek
+ RTL-8139 revision K boards, and totally unused otherwise. It tries
+ to match the transceiver to the cable characteristics. This is
+ experimental since hardly documented by the manufacturer.
+ If unsure, say Y.
+
+config 8139TOO_8129
+ bool "Support for older RTL-8129/8130 boards"
+ depends on 8139TOO
+ ---help---
+ This enables support for the older and uncommon RTL-8129 and
+ RTL-8130 chips, which support MII via an external transceiver,
+ instead of an internal one. Disabling this option will save some
+ memory by making the code size smaller. If unsure, say Y.
+
+config 8139_OLD_RX_RESET
+ bool "Use older RX-reset method"
+ depends on 8139TOO
+ ---help---
+ The 8139too driver was recently updated to contain a more rapid
+ reset sequence, in the face of severe receive errors. This "new"
+ RX-reset method should be adequate for all boards. But if you
+ experience problems, you can enable this option to restore the
+ old RX-reset behavior. If unsure, say N.
+
+config R8169
+ tristate "Realtek 8169 gigabit ethernet support"
+ depends on NET_VENDOR_REALTEK && PCI
+ select FW_LOADER
+ select CRC32
+ select MII
+ ---help---
+ Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
+
+ To compile this driver as a module, choose M here: the module
+ will be called r8169. This is recommended.
+
+config SC92031
+ tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+ depends on NET_VENDOR_REALTEK && PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+ have one of these, say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sc92031. This is recommended.
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
new file mode 100644
index 0000000..e48cfb6
--- /dev/null
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Realtek network device drivers.
+#
+
+obj-$(CONFIG_8139CP) += 8139cp.o
+obj-$(CONFIG_8139TOO) += 8139too.o
+obj-$(CONFIG_ATP) += atp.o
+obj-$(CONFIG_R8169) += r8169.o
+obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/atp.c b/drivers/net/ethernet/realtek/atp.c
similarity index 100%
rename from drivers/net/atp.c
rename to drivers/net/ethernet/realtek/atp.c
diff --git a/drivers/net/atp.h b/drivers/net/ethernet/realtek/atp.h
similarity index 100%
rename from drivers/net/atp.h
rename to drivers/net/ethernet/realtek/atp.h
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/ethernet/realtek/pci-skeleton.c
similarity index 100%
rename from drivers/net/pci-skeleton.c
rename to drivers/net/ethernet/realtek/pci-skeleton.c
diff --git a/drivers/net/r8169.c b/drivers/net/ethernet/realtek/r8169.c
similarity index 100%
rename from drivers/net/r8169.c
rename to drivers/net/ethernet/realtek/r8169.c
diff --git a/drivers/net/sc92031.c b/drivers/net/ethernet/realtek/sc92031.c
similarity index 100%
rename from drivers/net/sc92031.c
rename to drivers/net/ethernet/realtek/sc92031.c
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists