| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1312082850-24914-35-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Sat, 30 Jul 2011 20:26:53 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Tomoya <tomoya-linux@....okisemi.com>,
Toshiharu Okada <toshiharu-linux@....okisemi.com>
Subject: [net-next v2 34/71] pch_gbe: Move the OKI Semiconductor driver
Move the OKI Semiconductor driver into driver/net/ethernet/oki-semi/
and make the necessary Kconfig and Makefile changes.
Note: there is no documented maintainer for this driver, so I CC'd
the last 2 major contributors.
CC: Tomoya <tomoya-linux@....okisemi.com>
CC: Toshiharu Okada <toshiharu-linux@....okisemi.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/Kconfig | 19 -------------------
drivers/net/Makefile | 1 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/oki-semi/Kconfig | 18 ++++++++++++++++++
drivers/net/ethernet/oki-semi/Makefile | 5 +++++
drivers/net/ethernet/oki-semi/pch_gbe/Kconfig | 20 ++++++++++++++++++++
.../net/{ => ethernet/oki-semi}/pch_gbe/Makefile | 0
.../net/{ => ethernet/oki-semi}/pch_gbe/pch_gbe.h | 0
.../{ => ethernet/oki-semi}/pch_gbe/pch_gbe_api.c | 0
.../{ => ethernet/oki-semi}/pch_gbe/pch_gbe_api.h | 0
.../oki-semi}/pch_gbe/pch_gbe_ethtool.c | 0
.../{ => ethernet/oki-semi}/pch_gbe/pch_gbe_main.c | 0
.../oki-semi}/pch_gbe/pch_gbe_param.c | 0
.../{ => ethernet/oki-semi}/pch_gbe/pch_gbe_phy.c | 0
.../{ => ethernet/oki-semi}/pch_gbe/pch_gbe_phy.h | 0
16 files changed, 45 insertions(+), 20 deletions(-)
create mode 100644 drivers/net/ethernet/oki-semi/Kconfig
create mode 100644 drivers/net/ethernet/oki-semi/Makefile
create mode 100644 drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
rename drivers/net/{ => ethernet/oki-semi}/pch_gbe/Makefile (100%)
rename drivers/net/{ => ethernet/oki-semi}/pch_gbe/pch_gbe.h (100%)
rename drivers/net/{ => ethernet/oki-semi}/pch_gbe/pch_gbe_api.c (100%)
rename drivers/net/{ => ethernet/oki-semi}/pch_gbe/pch_gbe_api.h (100%)
rename drivers/net/{ => ethernet/oki-semi}/pch_gbe/pch_gbe_ethtool.c (100%)
rename drivers/net/{ => ethernet/oki-semi}/pch_gbe/pch_gbe_main.c (100%)
rename drivers/net/{ => ethernet/oki-semi}/pch_gbe/pch_gbe_param.c (100%)
rename drivers/net/{ => ethernet/oki-semi}/pch_gbe/pch_gbe_phy.c (100%)
rename drivers/net/{ => ethernet/oki-semi}/pch_gbe/pch_gbe_phy.h (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 37e0cd7..7001b0d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -995,25 +995,6 @@ config S6GMAC
To compile this driver as a module, choose M here. The module
will be called s6gmac.
-config PCH_GBE
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
- depends on PCI
- select MII
- ---help---
- This is a gigabit ethernet driver for EG20T PCH.
- EG20T PCH is the platform controller hub that is used in Intel's
- general embedded platform.
- EG20T PCH has Gigabit Ethernet interface.
- Using this interface, it is able to access system devices connected
- to Gigabit Ethernet.
- This driver enables Gigabit Ethernet function.
-
- This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7223.
- ML7223 IOH is for MP(Media Phone) use.
- ML7223 is companion chip for Intel Atom E6xx series.
- ML7223 is completely compatible for Intel EG20T PCH.
-
endif # NETDEV_1000
#
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a368e29..d60c838 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -156,5 +156,4 @@ obj-$(CONFIG_WIMAX) += wimax/
obj-$(CONFIG_CAIF) += caif/
obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
-obj-$(CONFIG_PCH_GBE) += pch_gbe/
obj-$(CONFIG_TILE_NET) += tile/
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 35ed4c2..0eaf957 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -32,6 +32,7 @@ source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
source "drivers/net/ethernet/natsemi/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
+source "drivers/net/ethernet/oki-semi/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index ea0999f..b5ca872 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
+obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
diff --git a/drivers/net/ethernet/oki-semi/Kconfig b/drivers/net/ethernet/oki-semi/Kconfig
new file mode 100644
index 0000000..f831a81
--- /dev/null
+++ b/drivers/net/ethernet/oki-semi/Kconfig
@@ -0,0 +1,18 @@
+#
+# OKI Semiconductor device configuration
+#
+
+config NET_VENDOR_OKI
+ bool "OKI Semiconductor devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about OKI Semiconductor cards. If you say Y, you will
+ be asked for your specific card in the following questions.
+
+source "drivers/net/ethernet/oki-semi/pch_gbe/Kconfig"
diff --git a/drivers/net/ethernet/oki-semi/Makefile b/drivers/net/ethernet/oki-semi/Makefile
new file mode 100644
index 0000000..b6780c8
--- /dev/null
+++ b/drivers/net/ethernet/oki-semi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the OKI Semiconductor device drivers.
+#
+
+obj-$(CONFIG_PCH_GBE) += pch_gbe/
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
new file mode 100644
index 0000000..f66fefa
--- /dev/null
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
@@ -0,0 +1,20 @@
+#
+# OKI Semiconductor device configuration
+#
+
+config PCH_GBE
+ tristate "OKI SEMICONDUCTOR ML7223 IOH GbE (Intel EG20T PCH)"
+ depends on NET_VENDOR_OKI && PCI
+ select MII
+ ---help---
+ This is a gigabit ethernet driver for EG20T PCH.
+ EG20T PCH is the platform controller hub that is used in Intel's
+ general embedded platform. EG20T PCH has Gigabit Ethernet interface.
+ Using this interface, it is able to access system devices connected
+ to Gigabit Ethernet. This driver enables Gigabit Ethernet function.
+
+ This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
+ Output Hub), ML7223.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7223 is companion chip for Intel Atom E6xx series.
+ ML7223 is completely compatible for Intel EG20T PCH.
diff --git a/drivers/net/pch_gbe/Makefile b/drivers/net/ethernet/oki-semi/pch_gbe/Makefile
similarity index 100%
rename from drivers/net/pch_gbe/Makefile
rename to drivers/net/ethernet/oki-semi/pch_gbe/Makefile
diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
similarity index 100%
rename from drivers/net/pch_gbe/pch_gbe.h
rename to drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
diff --git a/drivers/net/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
similarity index 100%
rename from drivers/net/pch_gbe/pch_gbe_api.c
rename to drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
diff --git a/drivers/net/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
similarity index 100%
rename from drivers/net/pch_gbe/pch_gbe_api.h
rename to drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
diff --git a/drivers/net/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
similarity index 100%
rename from drivers/net/pch_gbe/pch_gbe_ethtool.c
rename to drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
similarity index 100%
rename from drivers/net/pch_gbe/pch_gbe_main.c
rename to drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
diff --git a/drivers/net/pch_gbe/pch_gbe_param.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
similarity index 100%
rename from drivers/net/pch_gbe/pch_gbe_param.c
rename to drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c
diff --git a/drivers/net/pch_gbe/pch_gbe_phy.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
similarity index 100%
rename from drivers/net/pch_gbe/pch_gbe_phy.c
rename to drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
diff --git a/drivers/net/pch_gbe/pch_gbe_phy.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
similarity index 100%
rename from drivers/net/pch_gbe/pch_gbe_phy.h
rename to drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists