| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1312082850-24914-38-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Sat, 30 Jul 2011 20:26:56 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Shingo Fujimoto <shingo@...b.fujitsu.co.jp>,
Yutaka Tamiya <tamy@...b.fujitsu.co.jp>,
Rene Schmit <rene@....lu>, Mika Kuoppala <miku@....fi>
Subject: [net-next v2 37/71] eth16i: Move the Allied Telesis/Fujitsu drivers
Move the Allied Telesis/Fujitsu drivers into drivers/net/ethernet/fujitsu/
and make the necessary Kconfig and Makefile changes.
CC: Shingo Fujimoto <shingo@...b.fujitsu.co.jp>
CC: Yutaka Tamiya <tamy@...b.fujitsu.co.jp>
CC: Rene Schmit <rene@....lu>
CC: Mika Kuoppala <miku@....fi>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
MAINTAINERS | 2 +-
drivers/net/Kconfig | 40 ----------------
drivers/net/Makefile | 3 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/fujitsu/Kconfig | 49 ++++++++++++++++++++
drivers/net/ethernet/fujitsu/Makefile | 7 +++
drivers/net/{ => ethernet/fujitsu}/at1700.c | 0
drivers/net/{ => ethernet/fujitsu}/eth16i.c | 0
.../net/{pcmcia => ethernet/fujitsu}/fmvj18x_cs.c | 0
drivers/net/pcmcia/Kconfig | 10 ----
drivers/net/pcmcia/Makefile | 1 -
12 files changed, 59 insertions(+), 55 deletions(-)
create mode 100644 drivers/net/ethernet/fujitsu/Kconfig
create mode 100644 drivers/net/ethernet/fujitsu/Makefile
rename drivers/net/{ => ethernet/fujitsu}/at1700.c (100%)
rename drivers/net/{ => ethernet/fujitsu}/eth16i.c (100%)
rename drivers/net/{pcmcia => ethernet/fujitsu}/fmvj18x_cs.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7acba11..9e4a6b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2512,7 +2512,7 @@ F: net/bridge/
ETHERTEAM 16I DRIVER
M: Mika Kuoppala <miku@....fi>
S: Maintained
-F: drivers/net/eth16i.c
+F: drivers/net/ethernet/fujitsu/eth16i.c
EXT2 FILE SYSTEM
M: Jan Kara <jack@...e.cz>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 349c6e1..91a498e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -428,18 +428,6 @@ config DNET
To compile this driver as a module, choose M here: the module
will be called dnet.
-config AT1700
- tristate "AT1700/1720 support (EXPERIMENTAL)"
- depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called at1700.
-
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
depends on ISA || EISA || PCI
@@ -451,34 +439,6 @@ config HP100
To compile this driver as a module, choose M here. The module
will be called hp100.
-config NET_ISA
- bool "Other ISA cards"
- depends on ISA
- ---help---
- If your network (Ethernet) card hasn't been mentioned yet and its
- bus system (that's the way the cards talks to the other components
- of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
- Make sure you know the name of your card. Read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- If unsure, say Y.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the remaining ISA network card questions. If you say Y, you will be
- asked for your specific card in the following questions.
-
-config ETH16I
- tristate "ICL EtherTeam 16i/32 support"
- depends on NET_ISA
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called eth16i.
-
config NET_PCI
bool "EISA, VLB, PCI and on board controllers"
depends on ISA || EISA || PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index ad3b8a8..00a180c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -96,10 +96,7 @@ obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_DEFXX) += defxx.o
-obj-$(CONFIG_AT1700) += at1700.o
obj-$(CONFIG_CPMAC) += cpmac.o
-
-obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index bdc0df8..d3aff74 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -24,6 +24,7 @@ source "drivers/net/ethernet/dlink/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/faraday/Kconfig"
+source "drivers/net/ethernet/fujitsu/Kconfig"
source "drivers/net/ethernet/ibm/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index ac60ac9..b098c5e 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
+obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/
obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
new file mode 100644
index 0000000..980c81c
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -0,0 +1,49 @@
+#
+# Fujitsu Network device configuration
+#
+
+config NET_VENDOR_FUJITSU
+ bool "Fujitsu devices"
+ depends on ISA || PCMCIA || (ISA || MCA_LEGACY) && EXPERIMENTAL
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ the questions about Fujitsu cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+config AT1700
+ tristate "AT1700/1720 support (EXPERIMENTAL)"
+ depends on NET_VENDOR_FUJITSU && (ISA || MCA_LEGACY) && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called at1700.
+
+config PCMCIA_FMVJ18X
+ tristate "Fujitsu FMV-J18x PCMCIA support"
+ depends on NET_VENDOR_FUJITSU && PCMCIA
+ select CRC32
+ ---help---
+ Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
+ PCMCIA (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called fmvj18x_cs. If unsure, say N.
+
+config ETH16I
+ tristate "ICL EtherTeam 16i/32 support"
+ depends on NET_VENDOR_FUJITSU && ISA
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called eth16i.
diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile
new file mode 100644
index 0000000..2730ae6
--- /dev/null
+++ b/drivers/net/ethernet/fujitsu/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Fujitsu network device drivers.
+#
+
+obj-$(CONFIG_AT1700) += at1700.o
+obj-$(CONFIG_ETH16I) += eth16i.o
+obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
diff --git a/drivers/net/at1700.c b/drivers/net/ethernet/fujitsu/at1700.c
similarity index 100%
rename from drivers/net/at1700.c
rename to drivers/net/ethernet/fujitsu/at1700.c
diff --git a/drivers/net/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c
similarity index 100%
rename from drivers/net/eth16i.c
rename to drivers/net/ethernet/fujitsu/eth16i.c
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
similarity index 100%
rename from drivers/net/pcmcia/fmvj18x_cs.c
rename to drivers/net/ethernet/fujitsu/fmvj18x_cs.c
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index f5a738f..80d291e 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -21,16 +21,6 @@ menuconfig NET_PCMCIA
if NET_PCMCIA && PCMCIA
-config PCMCIA_FMVJ18X
- tristate "Fujitsu FMV-J18x PCMCIA support"
- select CRC32
- help
- Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
- PCMCIA (PC-card) Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called fmvj18x_cs. If unsure, say N.
-
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
help
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
index f9c9883..ccf5535 100644
--- a/drivers/net/pcmcia/Makefile
+++ b/drivers/net/pcmcia/Makefile
@@ -3,7 +3,6 @@
#
# 16-bit client drivers
-obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists