| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1312082850-24914-48-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Sat, 30 Jul 2011 20:27:06 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com,
Donald Becker <becker@...ld.com>
Subject: [net-next v2 47/71] hamachi/yellowfin: Move the packet engine drivers
Move the packet engine drivers to drivers/net/ethernet/packetengines/
and the necessary Kconfig and Makefile changes.
CC: Donald Becker <becker@...ld.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/Kconfig | 26 ------------
drivers/net/Makefile | 2 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/packetengines/Kconfig | 42 ++++++++++++++++++++
drivers/net/ethernet/packetengines/Makefile | 6 +++
drivers/net/{ => ethernet/packetengines}/hamachi.c | 0
.../net/{ => ethernet/packetengines}/yellowfin.c | 0
8 files changed, 50 insertions(+), 28 deletions(-)
create mode 100644 drivers/net/ethernet/packetengines/Kconfig
create mode 100644 drivers/net/ethernet/packetengines/Makefile
rename drivers/net/{ => ethernet/packetengines}/hamachi.c (100%)
rename drivers/net/{ => ethernet/packetengines}/yellowfin.c (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 698b5e7..eb50af7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -541,32 +541,6 @@ config IP1000
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
-config HAMACHI
- tristate "Packet Engines Hamachi GNIC-II support"
- depends on PCI
- select MII
- help
- If you have a Gigabit Ethernet card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module will be
- called hamachi.
-
-config YELLOWFIN
- tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
- select CRC32
- ---help---
- Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
- adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
- used by the Beowulf Linux cluster project. See
- <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
- information about this driver in particular and Beowulf in general.
-
- To compile this driver as a module, choose M here: the module
- will be called yellowfin. This is recommended.
-
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
depends on PPC || MICROBLAZE
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 96112dd..d8c286e 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_PLIP) += plip.o
obj-$(CONFIG_ROADRUNNER) += rrunner.o
obj-$(CONFIG_R6040) += r6040.o
-obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
@@ -30,7 +29,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
# end link order section
#
-obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_HP100) += hp100.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 3983e70..140dd73 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -39,6 +39,7 @@ source "drivers/net/ethernet/natsemi/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/nuvoton/Kconfig"
source "drivers/net/ethernet/oki-semi/Kconfig"
+source "drivers/net/ethernet/packetengines/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 873d275..8a97b19 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
+obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
new file mode 100644
index 0000000..3fa8d39
--- /dev/null
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -0,0 +1,42 @@
+#
+# Packet engine device configuration
+#
+
+config NET_PACKET_ENGINE
+ bool "Packet Engine devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about packet engine devices. If you say Y, you will
+ be asked for your specific card in the following questions.
+
+config HAMACHI
+ tristate "Packet Engines Hamachi GNIC-II support"
+ depends on NET_PACKET_ENGINE && PCI
+ select MII
+ ---help---
+ If you have a Gigabit Ethernet card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module will be
+ called hamachi.
+
+config YELLOWFIN
+ tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
+ depends on NET_PACKET_ENGINE && PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
+ adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
+ used by the Beowulf Linux cluster project. See
+ <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
+ information about this driver in particular and Beowulf in general.
+
+ To compile this driver as a module, choose M here: the module
+ will be called yellowfin. This is recommended.
diff --git a/drivers/net/ethernet/packetengines/Makefile b/drivers/net/ethernet/packetengines/Makefile
new file mode 100644
index 0000000..995ccd0
--- /dev/null
+++ b/drivers/net/ethernet/packetengines/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Packet Engine network device drivers.
+#
+
+obj-$(CONFIG_HAMACHI) += hamachi.o
+obj-$(CONFIG_YELLOWFIN) += yellowfin.o
diff --git a/drivers/net/hamachi.c b/drivers/net/ethernet/packetengines/hamachi.c
similarity index 100%
rename from drivers/net/hamachi.c
rename to drivers/net/ethernet/packetengines/hamachi.c
diff --git a/drivers/net/yellowfin.c b/drivers/net/ethernet/packetengines/yellowfin.c
similarity index 100%
rename from drivers/net/yellowfin.c
rename to drivers/net/ethernet/packetengines/yellowfin.c
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists