| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1312231375-14398-3-git-send-email-rmody@brocade.com>
Date: Mon, 1 Aug 2011 13:42:51 -0700
From: Rasesh Mody <rmody@...cade.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>
CC: <adapter_linux_open_src_team@...cade.com>,
Rasesh Mody <rmody@...cade.com>
Subject: [PATCH 2/6] bna: Consolidated HW Registers for Supported HWs
Change details:
- Introducing new file bfi_reg.h for consolidating all supported hardware
registers. This file completely replaces bfi_ctreg.h.
- Updated ioc code as per register definition change.
Signed-off-by: Rasesh Mody <rmody@...cade.com>
---
drivers/net/bna/bfa_ioc.c | 2 +-
drivers/net/bna/bfa_ioc_ct.c | 78 ++++----
drivers/net/bna/bfi_reg.h | 452 ++++++++++++++++++++++++++++++++++++++++++
drivers/net/bna/bna_hw.h | 6 +-
4 files changed, 497 insertions(+), 41 deletions(-)
create mode 100644 drivers/net/bna/bfi_reg.h
diff --git a/drivers/net/bna/bfa_ioc.c b/drivers/net/bna/bfa_ioc.c
index 126b0aa..3cdea65 100644
--- a/drivers/net/bna/bfa_ioc.c
+++ b/drivers/net/bna/bfa_ioc.c
@@ -19,7 +19,7 @@
#include "bfa_ioc.h"
#include "cna.h"
#include "bfi.h"
-#include "bfi_ctreg.h"
+#include "bfi_reg.h"
#include "bfa_defs.h"
/**
diff --git a/drivers/net/bna/bfa_ioc_ct.c b/drivers/net/bna/bfa_ioc_ct.c
index 29b5fd0..209f1f3 100644
--- a/drivers/net/bna/bfa_ioc_ct.c
+++ b/drivers/net/bna/bfa_ioc_ct.c
@@ -19,7 +19,7 @@
#include "bfa_ioc.h"
#include "cna.h"
#include "bfi.h"
-#include "bfi_ctreg.h"
+#include "bfi_reg.h"
#include "bfa_defs.h"
#define bfa_ioc_ct_sync_pos(__ioc) \
@@ -172,7 +172,7 @@ bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc)
readl(ioc->ioc_regs.ll_halt);
readl(ioc->ioc_regs.alt_ll_halt);
} else {
- writel(__PSS_ERR_STATUS_SET, ioc->ioc_regs.err_set);
+ writel(~0U, ioc->ioc_regs.err_set);
readl(ioc->ioc_regs.err_set);
}
}
@@ -190,21 +190,21 @@ static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn; } iocreg_fnreg[] = {
/**
* Host <-> LPU mailbox command/status registers - port 0
*/
-static struct { u32 hfn, lpu; } iocreg_mbcmd_p0[] = {
- { HOSTFN0_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN0_MBOX0_CMD_STAT },
- { HOSTFN1_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN1_MBOX0_CMD_STAT },
- { HOSTFN2_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN2_MBOX0_CMD_STAT },
- { HOSTFN3_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN3_MBOX0_CMD_STAT }
+static struct { u32 hfn, lpu; } ct_p0reg[] = {
+ { HOSTFN0_LPU0_CMD_STAT, LPU0_HOSTFN0_CMD_STAT },
+ { HOSTFN1_LPU0_CMD_STAT, LPU0_HOSTFN1_CMD_STAT },
+ { HOSTFN2_LPU0_CMD_STAT, LPU0_HOSTFN2_CMD_STAT },
+ { HOSTFN3_LPU0_CMD_STAT, LPU0_HOSTFN3_CMD_STAT }
};
/**
* Host <-> LPU mailbox command/status registers - port 1
*/
-static struct { u32 hfn, lpu; } iocreg_mbcmd_p1[] = {
- { HOSTFN0_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN0_MBOX0_CMD_STAT },
- { HOSTFN1_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN1_MBOX0_CMD_STAT },
- { HOSTFN2_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN2_MBOX0_CMD_STAT },
- { HOSTFN3_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN3_MBOX0_CMD_STAT }
+static struct { u32 hfn, lpu; } ct_p1reg[] = {
+ { HOSTFN0_LPU1_CMD_STAT, LPU1_HOSTFN0_CMD_STAT },
+ { HOSTFN1_LPU1_CMD_STAT, LPU1_HOSTFN1_CMD_STAT },
+ { HOSTFN2_LPU1_CMD_STAT, LPU1_HOSTFN2_CMD_STAT },
+ { HOSTFN3_LPU1_CMD_STAT, LPU1_HOSTFN3_CMD_STAT }
};
static void
@@ -223,16 +223,16 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC1_STATE_REG;
- ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].hfn;
- ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].lpu;
+ ioc->ioc_regs.hfn_mbox_cmd = rb + ct_p0reg[pcifn].hfn;
+ ioc->ioc_regs.lpu_mbox_cmd = rb + ct_p0reg[pcifn].lpu;
ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1;
} else {
ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC0_STATE_REG;
- ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].hfn;
- ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].lpu;
+ ioc->ioc_regs.hfn_mbox_cmd = rb + ct_p1reg[pcifn].hfn;
+ ioc->ioc_regs.lpu_mbox_cmd = rb + ct_p1reg[pcifn].lpu;
ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0;
}
@@ -242,8 +242,8 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
*/
ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG);
ioc->ioc_regs.pss_err_status_reg = (rb + PSS_ERR_STATUS_REG);
- ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_425_CTL_REG);
- ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_312_CTL_REG);
+ ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_LCLK_CTL_REG);
+ ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_SCLK_CTL_REG);
/*
* IOC semaphore registers and serialization
@@ -440,14 +440,15 @@ bfa_ioc_ct_pll_init(void __iomem *rb, bool fcmode)
{
u32 pll_sclk, pll_fclk, r32;
- pll_sclk = __APP_PLL_312_LRESETN | __APP_PLL_312_ENARST |
- __APP_PLL_312_RSEL200500 | __APP_PLL_312_P0_1(3U) |
- __APP_PLL_312_JITLMT0_1(3U) |
- __APP_PLL_312_CNTLMT0_1(1U);
- pll_fclk = __APP_PLL_425_LRESETN | __APP_PLL_425_ENARST |
- __APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(3U) |
- __APP_PLL_425_JITLMT0_1(3U) |
- __APP_PLL_425_CNTLMT0_1(1U);
+ pll_sclk = __APP_PLL_SCLK_LRESETN | __APP_PLL_SCLK_ENARST |
+ __APP_PLL_SCLK_RSEL200500 | __APP_PLL_SCLK_P0_1(3U) |
+ __APP_PLL_SCLK_JITLMT0_1(3U) |
+ __APP_PLL_SCLK_CNTLMT0_1(1U);
+ pll_fclk = __APP_PLL_LCLK_LRESETN | __APP_PLL_LCLK_ENARST |
+ __APP_PLL_LCLK_RSEL200500 | __APP_PLL_LCLK_P0_1(3U) |
+ __APP_PLL_LCLK_JITLMT0_1(3U) |
+ __APP_PLL_LCLK_CNTLMT0_1(1U);
+
if (fcmode) {
writel(0, (rb + OP_MODE));
writel(__APP_EMS_CMLCKSEL |
@@ -468,27 +469,28 @@ bfa_ioc_ct_pll_init(void __iomem *rb, bool fcmode)
writel(0xffffffffU, (rb + HOSTFN0_INT_MSK));
writel(0xffffffffU, (rb + HOSTFN1_INT_MSK));
writel(pll_sclk |
- __APP_PLL_312_LOGIC_SOFT_RESET,
- rb + APP_PLL_312_CTL_REG);
+ __APP_PLL_SCLK_LOGIC_SOFT_RESET,
+ rb + APP_PLL_SCLK_CTL_REG);
writel(pll_fclk |
- __APP_PLL_425_LOGIC_SOFT_RESET,
- rb + APP_PLL_425_CTL_REG);
+ __APP_PLL_LCLK_LOGIC_SOFT_RESET,
+ rb + APP_PLL_LCLK_CTL_REG);
writel(pll_sclk |
- __APP_PLL_312_LOGIC_SOFT_RESET | __APP_PLL_312_ENABLE,
- rb + APP_PLL_312_CTL_REG);
+ __APP_PLL_SCLK_LOGIC_SOFT_RESET | __APP_PLL_SCLK_ENABLE,
+ rb + APP_PLL_SCLK_CTL_REG);
writel(pll_fclk |
- __APP_PLL_425_LOGIC_SOFT_RESET | __APP_PLL_425_ENABLE,
- rb + APP_PLL_425_CTL_REG);
+ __APP_PLL_LCLK_LOGIC_SOFT_RESET | __APP_PLL_LCLK_ENABLE,
+ rb + APP_PLL_LCLK_CTL_REG);
readl(rb + HOSTFN0_INT_MSK);
udelay(2000);
writel(0xffffffffU, (rb + HOSTFN0_INT_STATUS));
writel(0xffffffffU, (rb + HOSTFN1_INT_STATUS));
writel(pll_sclk |
- __APP_PLL_312_ENABLE,
- rb + APP_PLL_312_CTL_REG);
+ __APP_PLL_SCLK_ENABLE,
+ rb + APP_PLL_SCLK_CTL_REG);
writel(pll_fclk |
- __APP_PLL_425_ENABLE,
- rb + APP_PLL_425_CTL_REG);
+ __APP_PLL_LCLK_ENABLE,
+ rb + APP_PLL_LCLK_CTL_REG);
+
if (!fcmode) {
writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P0));
writel(__PMM_1T_RESET_P, (rb + PMM_1T_RESET_REG_P1));
diff --git a/drivers/net/bna/bfi_reg.h b/drivers/net/bna/bfi_reg.h
new file mode 100644
index 0000000..efacff3
--- /dev/null
+++ b/drivers/net/bna/bfi_reg.h
@@ -0,0 +1,452 @@
+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+/*
+ * bfi_reg.h ASIC register defines for all Brocade adapter ASICs
+ */
+
+#ifndef __BFI_REG_H__
+#define __BFI_REG_H__
+
+#define HOSTFN0_INT_STATUS 0x00014000 /* cb/ct */
+#define HOSTFN1_INT_STATUS 0x00014100 /* cb/ct */
+#define HOSTFN2_INT_STATUS 0x00014300 /* ct */
+#define HOSTFN3_INT_STATUS 0x00014400 /* ct */
+#define HOSTFN0_INT_MSK 0x00014004 /* cb/ct */
+#define HOSTFN1_INT_MSK 0x00014104 /* cb/ct */
+#define HOSTFN2_INT_MSK 0x00014304 /* ct */
+#define HOSTFN3_INT_MSK 0x00014404 /* ct */
+
+#define HOST_PAGE_NUM_FN0 0x00014008 /* cb/ct */
+#define HOST_PAGE_NUM_FN1 0x00014108 /* cb/ct */
+#define HOST_PAGE_NUM_FN2 0x00014308 /* ct */
+#define HOST_PAGE_NUM_FN3 0x00014408 /* ct */
+
+#define APP_PLL_LCLK_CTL_REG 0x00014204 /* cb/ct */
+#define __P_LCLK_PLL_LOCK 0x80000000
+#define __APP_PLL_LCLK_SRAM_USE_100MHZ 0x00100000
+#define __APP_PLL_LCLK_RESET_TIMER_MK 0x000e0000
+#define __APP_PLL_LCLK_RESET_TIMER_SH 17
+#define __APP_PLL_LCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_LCLK_RESET_TIMER_SH)
+#define __APP_PLL_LCLK_LOGIC_SOFT_RESET 0x00010000
+#define __APP_PLL_LCLK_CNTLMT0_1_MK 0x0000c000
+#define __APP_PLL_LCLK_CNTLMT0_1_SH 14
+#define __APP_PLL_LCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_LCLK_CNTLMT0_1_SH)
+#define __APP_PLL_LCLK_JITLMT0_1_MK 0x00003000
+#define __APP_PLL_LCLK_JITLMT0_1_SH 12
+#define __APP_PLL_LCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_LCLK_JITLMT0_1_SH)
+#define __APP_PLL_LCLK_HREF 0x00000800
+#define __APP_PLL_LCLK_HDIV 0x00000400
+#define __APP_PLL_LCLK_P0_1_MK 0x00000300
+#define __APP_PLL_LCLK_P0_1_SH 8
+#define __APP_PLL_LCLK_P0_1(_v) ((_v) << __APP_PLL_LCLK_P0_1_SH)
+#define __APP_PLL_LCLK_Z0_2_MK 0x000000e0
+#define __APP_PLL_LCLK_Z0_2_SH 5
+#define __APP_PLL_LCLK_Z0_2(_v) ((_v) << __APP_PLL_LCLK_Z0_2_SH)
+#define __APP_PLL_LCLK_RSEL200500 0x00000010
+#define __APP_PLL_LCLK_ENARST 0x00000008
+#define __APP_PLL_LCLK_BYPASS 0x00000004
+#define __APP_PLL_LCLK_LRESETN 0x00000002
+#define __APP_PLL_LCLK_ENABLE 0x00000001
+#define APP_PLL_SCLK_CTL_REG 0x00014208 /* cb/ct */
+#define __P_SCLK_PLL_LOCK 0x80000000
+#define __APP_PLL_SCLK_RESET_TIMER_MK 0x000e0000
+#define __APP_PLL_SCLK_RESET_TIMER_SH 17
+#define __APP_PLL_SCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_SCLK_RESET_TIMER_SH)
+#define __APP_PLL_SCLK_LOGIC_SOFT_RESET 0x00010000
+#define __APP_PLL_SCLK_CNTLMT0_1_MK 0x0000c000
+#define __APP_PLL_SCLK_CNTLMT0_1_SH 14
+#define __APP_PLL_SCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_SCLK_CNTLMT0_1_SH)
+#define __APP_PLL_SCLK_JITLMT0_1_MK 0x00003000
+#define __APP_PLL_SCLK_JITLMT0_1_SH 12
+#define __APP_PLL_SCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_SCLK_JITLMT0_1_SH)
+#define __APP_PLL_SCLK_HREF 0x00000800
+#define __APP_PLL_SCLK_HDIV 0x00000400
+#define __APP_PLL_SCLK_P0_1_MK 0x00000300
+#define __APP_PLL_SCLK_P0_1_SH 8
+#define __APP_PLL_SCLK_P0_1(_v) ((_v) << __APP_PLL_SCLK_P0_1_SH)
+#define __APP_PLL_SCLK_Z0_2_MK 0x000000e0
+#define __APP_PLL_SCLK_Z0_2_SH 5
+#define __APP_PLL_SCLK_Z0_2(_v) ((_v) << __APP_PLL_SCLK_Z0_2_SH)
+#define __APP_PLL_SCLK_RSEL200500 0x00000010
+#define __APP_PLL_SCLK_ENARST 0x00000008
+#define __APP_PLL_SCLK_BYPASS 0x00000004
+#define __APP_PLL_SCLK_LRESETN 0x00000002
+#define __APP_PLL_SCLK_ENABLE 0x00000001
+#define __ENABLE_MAC_AHB_1 0x00800000 /* ct */
+#define __ENABLE_MAC_AHB_0 0x00400000 /* ct */
+#define __ENABLE_MAC_1 0x00200000 /* ct */
+#define __ENABLE_MAC_0 0x00100000 /* ct */
+
+#define HOST_SEM0_REG 0x00014230 /* cb/ct */
+#define HOST_SEM1_REG 0x00014234 /* cb/ct */
+#define HOST_SEM2_REG 0x00014238 /* cb/ct */
+#define HOST_SEM3_REG 0x0001423c /* cb/ct */
+#define HOST_SEM4_REG 0x00014610 /* cb/ct */
+#define HOST_SEM5_REG 0x00014614 /* cb/ct */
+#define HOST_SEM6_REG 0x00014618 /* cb/ct */
+#define HOST_SEM7_REG 0x0001461c /* cb/ct */
+#define HOST_SEM0_INFO_REG 0x00014240 /* cb/ct */
+#define HOST_SEM1_INFO_REG 0x00014244 /* cb/ct */
+#define HOST_SEM2_INFO_REG 0x00014248 /* cb/ct */
+#define HOST_SEM3_INFO_REG 0x0001424c /* cb/ct */
+#define HOST_SEM4_INFO_REG 0x00014620 /* cb/ct */
+#define HOST_SEM5_INFO_REG 0x00014624 /* cb/ct */
+#define HOST_SEM6_INFO_REG 0x00014628 /* cb/ct */
+#define HOST_SEM7_INFO_REG 0x0001462c /* cb/ct */
+
+#define HOSTFN0_LPU0_CMD_STAT 0x00019000 /* cb/ct */
+#define HOSTFN0_LPU1_CMD_STAT 0x00019004 /* cb/ct */
+#define HOSTFN1_LPU0_CMD_STAT 0x00019010 /* cb/ct */
+#define HOSTFN1_LPU1_CMD_STAT 0x00019014 /* cb/ct */
+#define HOSTFN2_LPU0_CMD_STAT 0x00019150 /* ct */
+#define HOSTFN2_LPU1_CMD_STAT 0x00019154 /* ct */
+#define HOSTFN3_LPU0_CMD_STAT 0x00019160 /* ct */
+#define HOSTFN3_LPU1_CMD_STAT 0x00019164 /* ct */
+#define LPU0_HOSTFN0_CMD_STAT 0x00019008 /* cb/ct */
+#define LPU1_HOSTFN0_CMD_STAT 0x0001900c /* cb/ct */
+#define LPU0_HOSTFN1_CMD_STAT 0x00019018 /* cb/ct */
+#define LPU1_HOSTFN1_CMD_STAT 0x0001901c /* cb/ct */
+#define LPU0_HOSTFN2_CMD_STAT 0x00019158 /* ct */
+#define LPU1_HOSTFN2_CMD_STAT 0x0001915c /* ct */
+#define LPU0_HOSTFN3_CMD_STAT 0x00019168 /* ct */
+#define LPU1_HOSTFN3_CMD_STAT 0x0001916c /* ct */
+
+#define PSS_CTL_REG 0x00018800 /* cb/ct */
+#define __PSS_I2C_CLK_DIV_MK 0x007f0000
+#define __PSS_I2C_CLK_DIV_SH 16
+#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
+#define __PSS_LMEM_INIT_DONE 0x00001000
+#define __PSS_LMEM_RESET 0x00000200
+#define __PSS_LMEM_INIT_EN 0x00000100
+#define __PSS_LPU1_RESET 0x00000002
+#define __PSS_LPU0_RESET 0x00000001
+#define PSS_ERR_STATUS_REG 0x00018810 /* cb/ct */
+#define ERR_SET_REG 0x00018818 /* cb/ct */
+#define PSS_GPIO_OUT_REG 0x000188c0 /* cb/ct */
+#define __PSS_GPIO_OUT_REG 0x00000fff
+#define PSS_GPIO_OE_REG 0x000188c8 /* cb/ct */
+#define __PSS_GPIO_OE_REG 0x000000ff
+
+#define HOSTFN0_LPU_MBOX0_0 0x00019200 /* cb/ct */
+#define HOSTFN1_LPU_MBOX0_8 0x00019260 /* cb/ct */
+#define LPU_HOSTFN0_MBOX0_0 0x00019280 /* cb/ct */
+#define LPU_HOSTFN1_MBOX0_8 0x000192e0 /* cb/ct */
+#define HOSTFN2_LPU_MBOX0_0 0x00019400 /* ct */
+#define HOSTFN3_LPU_MBOX0_8 0x00019460 /* ct */
+#define LPU_HOSTFN2_MBOX0_0 0x00019480 /* ct */
+#define LPU_HOSTFN3_MBOX0_8 0x000194e0 /* ct */
+
+#define HOST_MSIX_ERR_INDEX_FN0 0x0001400c /* ct */
+#define HOST_MSIX_ERR_INDEX_FN1 0x0001410c /* ct */
+#define HOST_MSIX_ERR_INDEX_FN2 0x0001430c /* ct */
+#define HOST_MSIX_ERR_INDEX_FN3 0x0001440c /* ct */
+
+#define MBIST_CTL_REG 0x00014220 /* ct */
+#define __EDRAM_BISTR_START 0x00000004
+#define MBIST_STAT_REG 0x00014224 /* ct */
+#define ETH_MAC_SER_REG 0x00014288 /* ct */
+#define __APP_EMS_CKBUFAMPIN 0x00000020
+#define __APP_EMS_REFCLKSEL 0x00000010
+#define __APP_EMS_CMLCKSEL 0x00000008
+#define __APP_EMS_REFCKBUFEN2 0x00000004
+#define __APP_EMS_REFCKBUFEN1 0x00000002
+#define __APP_EMS_CHANNEL_SEL 0x00000001
+#define FNC_PERS_REG 0x00014604 /* ct */
+#define __F3_FUNCTION_ACTIVE 0x80000000
+#define __F3_FUNCTION_MODE 0x40000000
+#define __F3_PORT_MAP_MK 0x30000000
+#define __F3_PORT_MAP_SH 28
+#define __F3_PORT_MAP(_v) ((_v) << __F3_PORT_MAP_SH)
+#define __F3_VM_MODE 0x08000000
+#define __F3_INTX_STATUS_MK 0x07000000
+#define __F3_INTX_STATUS_SH 24
+#define __F3_INTX_STATUS(_v) ((_v) << __F3_INTX_STATUS_SH)
+#define __F2_FUNCTION_ACTIVE 0x00800000
+#define __F2_FUNCTION_MODE 0x00400000
+#define __F2_PORT_MAP_MK 0x00300000
+#define __F2_PORT_MAP_SH 20
+#define __F2_PORT_MAP(_v) ((_v) << __F2_PORT_MAP_SH)
+#define __F2_VM_MODE 0x00080000
+#define __F2_INTX_STATUS_MK 0x00070000
+#define __F2_INTX_STATUS_SH 16
+#define __F2_INTX_STATUS(_v) ((_v) << __F2_INTX_STATUS_SH)
+#define __F1_FUNCTION_ACTIVE 0x00008000
+#define __F1_FUNCTION_MODE 0x00004000
+#define __F1_PORT_MAP_MK 0x00003000
+#define __F1_PORT_MAP_SH 12
+#define __F1_PORT_MAP(_v) ((_v) << __F1_PORT_MAP_SH)
+#define __F1_VM_MODE 0x00000800
+#define __F1_INTX_STATUS_MK 0x00000700
+#define __F1_INTX_STATUS_SH 8
+#define __F1_INTX_STATUS(_v) ((_v) << __F1_INTX_STATUS_SH)
+#define __F0_FUNCTION_ACTIVE 0x00000080
+#define __F0_FUNCTION_MODE 0x00000040
+#define __F0_PORT_MAP_MK 0x00000030
+#define __F0_PORT_MAP_SH 4
+#define __F0_PORT_MAP(_v) ((_v) << __F0_PORT_MAP_SH)
+#define __F0_VM_MODE 0x00000008
+#define __F0_INTX_STATUS 0x00000007
+enum {
+ __F0_INTX_STATUS_MSIX = 0x0,
+ __F0_INTX_STATUS_INTA = 0x1,
+ __F0_INTX_STATUS_INTB = 0x2,
+ __F0_INTX_STATUS_INTC = 0x3,
+ __F0_INTX_STATUS_INTD = 0x4,
+};
+
+#define OP_MODE 0x0001460c
+#define __APP_ETH_CLK_LOWSPEED 0x00000004
+#define __GLOBAL_CORECLK_HALFSPEED 0x00000002
+#define __GLOBAL_FCOE_MODE 0x00000001
+#define FW_INIT_HALT_P0 0x000191ac
+#define __FW_INIT_HALT_P 0x00000001
+#define FW_INIT_HALT_P1 0x000191bc
+#define PMM_1T_RESET_REG_P0 0x0002381c
+#define __PMM_1T_RESET_P 0x00000001
+#define PMM_1T_RESET_REG_P1 0x00023c1c
+
+/**
+ * Brocade 1860 Adapter specific defines
+ */
+#define CT2_PCI_CPQ_BASE 0x00030000
+#define CT2_PCI_APP_BASE 0x00030100
+#define CT2_PCI_ETH_BASE 0x00030400
+
+/*
+ * APP block registers
+ */
+#define CT2_HOSTFN_INT_STATUS (CT2_PCI_APP_BASE + 0x00)
+#define CT2_HOSTFN_INTR_MASK (CT2_PCI_APP_BASE + 0x04)
+#define CT2_HOSTFN_PERSONALITY0 (CT2_PCI_APP_BASE + 0x08)
+#define __PME_STATUS_ 0x00200000
+#define __PF_VF_BAR_SIZE_MODE__MK 0x00180000
+#define __PF_VF_BAR_SIZE_MODE__SH 19
+#define __PF_VF_BAR_SIZE_MODE_(_v) ((_v) << __PF_VF_BAR_SIZE_MODE__SH)
+#define __FC_LL_PORT_MAP__MK 0x00060000
+#define __FC_LL_PORT_MAP__SH 17
+#define __FC_LL_PORT_MAP_(_v) ((_v) << __FC_LL_PORT_MAP__SH)
+#define __PF_VF_ACTIVE_ 0x00010000
+#define __PF_VF_CFG_RDY_ 0x00008000
+#define __PF_VF_ENABLE_ 0x00004000
+#define __PF_DRIVER_ACTIVE_ 0x00002000
+#define __PF_PME_SEND_ENABLE_ 0x00001000
+#define __PF_EXROM_OFFSET__MK 0x00000ff0
+#define __PF_EXROM_OFFSET__SH 4
+#define __PF_EXROM_OFFSET_(_v) ((_v) << __PF_EXROM_OFFSET__SH)
+#define __FC_LL_MODE_ 0x00000008
+#define __PF_INTX_PIN_ 0x00000007
+#define CT2_HOSTFN_PERSONALITY1 (CT2_PCI_APP_BASE + 0x0C)
+#define __PF_NUM_QUEUES1__MK 0xff000000
+#define __PF_NUM_QUEUES1__SH 24
+#define __PF_NUM_QUEUES1_(_v) ((_v) << __PF_NUM_QUEUES1__SH)
+#define __PF_VF_QUE_OFFSET1__MK 0x00ff0000
+#define __PF_VF_QUE_OFFSET1__SH 16
+#define __PF_VF_QUE_OFFSET1_(_v) ((_v) << __PF_VF_QUE_OFFSET1__SH)
+#define __PF_VF_NUM_QUEUES__MK 0x0000ff00
+#define __PF_VF_NUM_QUEUES__SH 8
+#define __PF_VF_NUM_QUEUES_(_v) ((_v) << __PF_VF_NUM_QUEUES__SH)
+#define __PF_VF_QUE_OFFSET_ 0x000000ff
+#define CT2_HOSTFN_PAGE_NUM (CT2_PCI_APP_BASE + 0x18)
+#define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR (CT2_PCI_APP_BASE + 0x38)
+
+/*
+ * Brocade 1860 adapter CPQ block registers
+ */
+#define CT2_HOSTFN_LPU0_MBOX0 (CT2_PCI_CPQ_BASE + 0x00)
+#define CT2_HOSTFN_LPU1_MBOX0 (CT2_PCI_CPQ_BASE + 0x20)
+#define CT2_LPU0_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x40)
+#define CT2_LPU1_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x60)
+#define CT2_HOSTFN_LPU0_CMD_STAT (CT2_PCI_CPQ_BASE + 0x80)
+#define CT2_HOSTFN_LPU1_CMD_STAT (CT2_PCI_CPQ_BASE + 0x84)
+#define CT2_LPU0_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x88)
+#define CT2_LPU1_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x8c)
+#define CT2_HOSTFN_LPU0_READ_STAT (CT2_PCI_CPQ_BASE + 0x90)
+#define CT2_HOSTFN_LPU1_READ_STAT (CT2_PCI_CPQ_BASE + 0x94)
+#define CT2_LPU0_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x98)
+#define CT2_LPU1_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x9C)
+#define CT2_HOST_SEM0_REG 0x000148f0
+#define CT2_HOST_SEM1_REG 0x000148f4
+#define CT2_HOST_SEM2_REG 0x000148f8
+#define CT2_HOST_SEM3_REG 0x000148fc
+#define CT2_HOST_SEM4_REG 0x00014900
+#define CT2_HOST_SEM5_REG 0x00014904
+#define CT2_HOST_SEM6_REG 0x00014908
+#define CT2_HOST_SEM7_REG 0x0001490c
+#define CT2_HOST_SEM0_INFO_REG 0x000148b0
+#define CT2_HOST_SEM1_INFO_REG 0x000148b4
+#define CT2_HOST_SEM2_INFO_REG 0x000148b8
+#define CT2_HOST_SEM3_INFO_REG 0x000148bc
+#define CT2_HOST_SEM4_INFO_REG 0x000148c0
+#define CT2_HOST_SEM5_INFO_REG 0x000148c4
+#define CT2_HOST_SEM6_INFO_REG 0x000148c8
+#define CT2_HOST_SEM7_INFO_REG 0x000148cc
+
+#define CT2_APP_PLL_LCLK_CTL_REG 0x00014808
+#define __APP_LPUCLK_HALFSPEED 0x40000000
+#define __APP_PLL_LCLK_LOAD 0x20000000
+#define __APP_PLL_LCLK_FBCNT_MK 0x1fe00000
+#define __APP_PLL_LCLK_FBCNT_SH 21
+#define __APP_PLL_LCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH)
+enum {
+ __APP_PLL_LCLK_FBCNT_425_MHZ = 6,
+ __APP_PLL_LCLK_FBCNT_468_MHZ = 4,
+};
+#define __APP_PLL_LCLK_EXTFB 0x00000800
+#define __APP_PLL_LCLK_ENOUTS 0x00000400
+#define __APP_PLL_LCLK_RATE 0x00000010
+#define CT2_APP_PLL_SCLK_CTL_REG 0x0001480c
+#define __P_SCLK_PLL_LOCK 0x80000000
+#define __APP_PLL_SCLK_REFCLK_SEL 0x40000000
+#define __APP_PLL_SCLK_CLK_DIV2 0x20000000
+#define __APP_PLL_SCLK_LOAD 0x10000000
+#define __APP_PLL_SCLK_FBCNT_MK 0x0ff00000
+#define __APP_PLL_SCLK_FBCNT_SH 20
+#define __APP_PLL_SCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH)
+enum {
+ __APP_PLL_SCLK_FBCNT_NORM = 6,
+ __APP_PLL_SCLK_FBCNT_10G_FC = 10,
+};
+#define __APP_PLL_SCLK_EXTFB 0x00000800
+#define __APP_PLL_SCLK_ENOUTS 0x00000400
+#define __APP_PLL_SCLK_RATE 0x00000010
+#define CT2_PCIE_MISC_REG 0x00014804
+#define __ETH_CLK_ENABLE_PORT1 0x00000010
+#define CT2_CHIP_MISC_PRG 0x000148a4
+#define __ETH_CLK_ENABLE_PORT0 0x00004000
+#define __APP_LPU_SPEED 0x00000002
+#define CT2_MBIST_STAT_REG 0x00014818
+#define CT2_MBIST_CTL_REG 0x0001481c
+#define CT2_PMM_1T_CONTROL_REG_P0 0x0002381c
+#define __PMM_1T_PNDB_P 0x00000002
+#define CT2_PMM_1T_CONTROL_REG_P1 0x00023c1c
+#define CT2_WGN_STATUS 0x00014990
+#define __A2T_AHB_LOAD 0x00000800
+#define __WGN_READY 0x00000400
+#define __GLBL_PF_VF_CFG_RDY 0x00000200
+#define CT2_NFC_CSR_SET_REG 0x00027424
+#define __HALT_NFC_CONTROLLER 0x00000002
+#define __NFC_CONTROLLER_HALTED 0x00001000
+
+#define CT2_CSI_MAC0_CONTROL_REG 0x000270d0
+#define __CSI_MAC_RESET 0x00000010
+#define __CSI_MAC_AHB_RESET 0x00000008
+#define CT2_CSI_MAC1_CONTROL_REG 0x000270d4
+#define CT2_CSI_MAC_CONTROL_REG(__n) \
+ (CT2_CSI_MAC0_CONTROL_REG + \
+ (__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG))
+
+/*
+ * Name semaphore registers based on usage
+ */
+#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
+#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
+#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
+#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
+#define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG
+#define BFA_IOC_FAIL_SYNC HOST_SEM5_INFO_REG
+
+/*
+ * CT2 semaphore register locations changed
+ */
+#define CT2_BFA_IOC0_HBEAT_REG CT2_HOST_SEM0_INFO_REG
+#define CT2_BFA_IOC0_STATE_REG CT2_HOST_SEM1_INFO_REG
+#define CT2_BFA_IOC1_HBEAT_REG CT2_HOST_SEM2_INFO_REG
+#define CT2_BFA_IOC1_STATE_REG CT2_HOST_SEM3_INFO_REG
+#define CT2_BFA_FW_USE_COUNT CT2_HOST_SEM4_INFO_REG
+#define CT2_BFA_IOC_FAIL_SYNC CT2_HOST_SEM5_INFO_REG
+
+#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
+#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
+
+/*
+ * And corresponding host interrupt status bit field defines
+ */
+#define __HFN_INT_CPE_Q0 0x00000001U
+#define __HFN_INT_CPE_Q1 0x00000002U
+#define __HFN_INT_CPE_Q2 0x00000004U
+#define __HFN_INT_CPE_Q3 0x00000008U
+#define __HFN_INT_CPE_Q4 0x00000010U
+#define __HFN_INT_CPE_Q5 0x00000020U
+#define __HFN_INT_CPE_Q6 0x00000040U
+#define __HFN_INT_CPE_Q7 0x00000080U
+#define __HFN_INT_RME_Q0 0x00000100U
+#define __HFN_INT_RME_Q1 0x00000200U
+#define __HFN_INT_RME_Q2 0x00000400U
+#define __HFN_INT_RME_Q3 0x00000800U
+#define __HFN_INT_RME_Q4 0x00001000U
+#define __HFN_INT_RME_Q5 0x00002000U
+#define __HFN_INT_RME_Q6 0x00004000U
+#define __HFN_INT_RME_Q7 0x00008000U
+#define __HFN_INT_ERR_EMC 0x00010000U
+#define __HFN_INT_ERR_LPU0 0x00020000U
+#define __HFN_INT_ERR_LPU1 0x00040000U
+#define __HFN_INT_ERR_PSS 0x00080000U
+#define __HFN_INT_MBOX_LPU0 0x00100000U
+#define __HFN_INT_MBOX_LPU1 0x00200000U
+#define __HFN_INT_MBOX1_LPU0 0x00400000U
+#define __HFN_INT_MBOX1_LPU1 0x00800000U
+#define __HFN_INT_LL_HALT 0x01000000U
+#define __HFN_INT_CPE_MASK 0x000000ffU
+#define __HFN_INT_RME_MASK 0x0000ff00U
+#define __HFN_INT_ERR_MASK \
+ (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 | \
+ __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT)
+#define __HFN_INT_FN0_MASK \
+ (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
+ __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
+ __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0)
+#define __HFN_INT_FN1_MASK \
+ (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
+ __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
+ __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1)
+
+/*
+ * Host interrupt status defines for 1860
+ */
+#define __HFN_INT_MBOX_LPU0_CT2 0x00010000U
+#define __HFN_INT_MBOX_LPU1_CT2 0x00020000U
+#define __HFN_INT_ERR_PSS_CT2 0x00040000U
+#define __HFN_INT_ERR_LPU0_CT2 0x00080000U
+#define __HFN_INT_ERR_LPU1_CT2 0x00100000U
+#define __HFN_INT_CPQ_HALT_CT2 0x00200000U
+#define __HFN_INT_ERR_WGN_CT2 0x00400000U
+#define __HFN_INT_ERR_LEHRX_CT2 0x00800000U
+#define __HFN_INT_ERR_LEHTX_CT2 0x01000000U
+#define __HFN_INT_ERR_MASK_CT2 \
+ (__HFN_INT_ERR_PSS_CT2 | __HFN_INT_ERR_LPU0_CT2 | \
+ __HFN_INT_ERR_LPU1_CT2 | __HFN_INT_CPQ_HALT_CT2 | \
+ __HFN_INT_ERR_WGN_CT2 | __HFN_INT_ERR_LEHRX_CT2 | \
+ __HFN_INT_ERR_LEHTX_CT2)
+#define __HFN_INT_FN0_MASK_CT2 \
+ (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
+ __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
+ __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0_CT2)
+#define __HFN_INT_FN1_MASK_CT2 \
+ (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
+ __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
+ __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1_CT2)
+
+/*
+ * asic memory map.
+ */
+#define PSS_SMEM_PAGE_START 0x8000
+#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
+#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
+
+#endif /* __BFI_REG_H__ */
diff --git a/drivers/net/bna/bna_hw.h b/drivers/net/bna/bna_hw.h
index cad233d..16a5eed 100644
--- a/drivers/net/bna/bna_hw.h
+++ b/drivers/net/bna/bna_hw.h
@@ -14,14 +14,16 @@
* Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
* All rights reserved
* www.brocade.com
- *
+ */
+
+/**
* File for interrupt macros and functions
*/
#ifndef __BNA_HW_H__
#define __BNA_HW_H__
-#include "bfi_ctreg.h"
+#include "bfi_reg.h"
/**
*
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists