[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 08 Aug 2011 14:07:32 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Robin Holt <holt@....com>
CC: Wolfgang Grandegger <wg@...ndegger.com>,
U Bhaskar-B22300 <B22300@...escale.com>,
socketcan-core@...ts.berlios.de, netdev@...r.kernel.org
Subject: Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source.
On 08/08/2011 01:31 PM, Robin Holt wrote:
> On Mon, Aug 08, 2011 at 10:37:58AM +0200, Wolfgang Grandegger wrote:
>> On 08/06/2011 04:34 PM, Robin Holt wrote:
>>> flexcan driver needs the clk_get, clk_get_rate, etc functions
>>> to work. This patch provides the minimum functionality.
>>
>> This needs some more general thoughts... apart from the question where
>> the code should go.
>>
>> Like for the MSCAN on the MPC5200, the user should be *able* to select
>> an appropriate clock source and divider via DTS node properties.
>> Currently it seems, that the DTS properties must match some
>> pre-configured values, most likely set by the boot loader. Please
>> correct me if I'm wrong. For me this is generic and should go into the
>> Flexcan driver. From there, a platform specific function, e.g.
>> flexcan_set_clock() might be called.
>
> OK. Dug a bit more. The p1010 built-in clocksource seems to be the
> periphereal clock frequency which is system bus frequency divided
> by 2. The clock source can not be changed, but the clock divider can
> by freezing the interface and setting the CTRL register. This appears
Which bit(s) in the CTRL register is/are this?
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Download attachment "signature.asc" of type "application/pgp-signature" (263 bytes)
Powered by blists - more mailing lists