lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 08 Aug 2011 15:08:25 +0200 From: Wolfgang Grandegger <wg@...ndegger.com> To: Robin Holt <holt@....com> CC: socketcan-core@...ts.berlios.de, U Bhaskar-B22300 <B22300@...escale.com>, Marc Kleine-Budde <mkl@...gutronix.de>, netdev@...r.kernel.org Subject: Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source. On 08/08/2011 01:31 PM, Robin Holt wrote: > On Mon, Aug 08, 2011 at 10:37:58AM +0200, Wolfgang Grandegger wrote: >> On 08/06/2011 04:34 PM, Robin Holt wrote: >>> flexcan driver needs the clk_get, clk_get_rate, etc functions >>> to work. This patch provides the minimum functionality. >> >> This needs some more general thoughts... apart from the question where >> the code should go. >> >> Like for the MSCAN on the MPC5200, the user should be *able* to select >> an appropriate clock source and divider via DTS node properties. >> Currently it seems, that the DTS properties must match some >> pre-configured values, most likely set by the boot loader. Please >> correct me if I'm wrong. For me this is generic and should go into the >> Flexcan driver. From there, a platform specific function, e.g. >> flexcan_set_clock() might be called. > > OK. Dug a bit more. The p1010 built-in clocksource seems to be the > periphereal clock frequency which is system bus frequency divided > by 2. The clock source can not be changed, but the clock divider can > by freezing the interface and setting the CTRL register. This appears > to only be done by the boot loader. I do not see why we can not leave And likely Freescale's bootloader does also fixup the DTS Flexcan node. Ah, oh, there's already someting in the mainline U-BOOT: commit 65bb8b060a873fa4f5188f2951081f6011259614 Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@...escale.com> Date: Fri Mar 4 20:27:58 2011 +0530 powerpc/85xx: Fix up clock_freq property in CAN node of dts Fix up the device tree property associated with the Flexcan clock frequency. This property is used to calculate the bit timing parameters for Flexcan. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@...escale.com> Signed-off-by: Kumar Gala <galak@...nel.crashing.org> > that functionality in the boot loader and then go back to a variation > on my earlier flexcan_clk_* patch. Is that close to the direction you > think we should go or have I completely misunderstood your wishes? The boot loader might not chose the optimum clock source and frequency, which might even be application dependent. Therefore it would be nice to allow the user to change it if necessary. Some CAN interfaces do even allow to use an external clock source. The main question is where we add that functionality. As more as I think of it, the clock interface would not be that bad, especially if it's available. Furthermore, if the bootloader sets the clock source and divider, we do not need device tree properties for it. A simply register lookup would reveal what values are used. We may just need the input clock source. Wolfgang. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists