Message-ID: <1312856502-31242-5-git-send-email-rmody@brocade.com>
Date:	Mon, 8 Aug 2011 19:21:38 -0700
From:	Rasesh Mody <rmody@...cade.com>
To:	<davem@...emloft.net>, <netdev@...r.kernel.org>
CC:	<adapter_linux_open_src_team@...cade.com>,
	Rasesh Mody <rmody@...cade.com>
Subject: [PATCH 4/8] bna: Add New HW Defs

Change details:
 - Add new file bna_hw_defs.h to support new code MSGQ, ENET and TX RX redign.
   This makes bna_hw.h obsolete and is removed in a later patch. bna_hw_defs.h
   removes all unused HW register definition that were part of bna_hw.h.

Signed-off-by: Rasesh Mody <rmody@...cade.com>
---
 drivers/net/bna/bna_hw_defs.h |  413 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 413 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/bna/bna_hw_defs.h

diff --git a/drivers/net/bna/bna_hw_defs.h b/drivers/net/bna/bna_hw_defs.h
new file mode 100644
index 0000000..07bb792
--- /dev/null
+++ b/drivers/net/bna/bna_hw_defs.h
@@ -0,0 +1,413 @@
+/*
+ * Linux network driver for Brocade Converged Network Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+/*
+ * Copyright (c) 2005-2011 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ */
+
+/**
+ * File for interrupt macros and functions
+ */
+
+#ifndef __BNA_HW_DEFS_H__
+#define __BNA_HW_DEFS_H__
+
+#include "bfi_reg.h"
+
+/**
+ *
+ * SW imposed limits
+ *
+ */
+
+#define BFI_ENET_MAX_MCAM		256
+
+#define BFI_INVALID_RID			-1
+
+#define BFI_IBIDX_SIZE			4
+
+#define BFI_VLAN_WORD_SHIFT		5	/* 32 bits */
+#define BFI_VLAN_WORD_MASK		0x1F
+#define BFI_VLAN_BLOCK_SHIFT		9	/* 512 bits */
+#define BFI_VLAN_BMASK_ALL		0xFF
+
+#define BFI_COALESCING_TIMER_UNIT	5	/* 5us */
+#define BFI_MAX_COALESCING_TIMEO	0xFF	/* in 5us units */
+#define BFI_MAX_INTERPKT_COUNT		0xFF
+#define BFI_MAX_INTERPKT_TIMEO		0xF	/* in 0.5us units */
+#define BFI_TX_COALESCING_TIMEO		20	/* 20 * 5 = 100us */
+#define BFI_TX_INTERPKT_COUNT		32
+#define	BFI_RX_COALESCING_TIMEO		12	/* 12 * 5 = 60us */
+#define	BFI_RX_INTERPKT_COUNT		6	/* Pkt Cnt = 6 */
+#define	BFI_RX_INTERPKT_TIMEO		3	/* 3 * 0.5 = 1.5us */
+
+#define BFI_TXQ_WI_SIZE			64	/* bytes */
+#define BFI_RXQ_WI_SIZE			8	/* bytes */
+#define BFI_CQ_WI_SIZE			16	/* bytes */
+#define BFI_TX_MAX_WRR_QUOTA		0xFFF
+
+#define BFI_TX_MAX_VECTORS_PER_WI	4
+#define BFI_TX_MAX_VECTORS_PER_PKT	0xFF
+#define BFI_TX_MAX_DATA_PER_VECTOR	0xFFFF
+#define BFI_TX_MAX_DATA_PER_PKT		0xFFFFFF
+
+/* Small Q buffer size */
+#define BFI_SMALL_RXBUF_SIZE		128
+
+#define BFI_TX_MAX_PRIO			8
+#define BFI_TX_PRIO_MAP_ALL		0xFF
+
+/*
+ *
+ * Register definitions and macros
+ *
+ */
+
+#define BNA_PCI_REG_CT_ADDRSZ		(0x40000)
+
+#define ct_reg_addr_init(_bna, _pcidev)					\
+{									\
+	struct bna_reg_offset reg_offset[] =				\
+	{{HOSTFN0_INT_STATUS, HOSTFN0_INT_MSK},				\
+	 {HOSTFN1_INT_STATUS, HOSTFN1_INT_MSK},				\
+	 {HOSTFN2_INT_STATUS, HOSTFN2_INT_MSK},				\
+	 {HOSTFN3_INT_STATUS, HOSTFN3_INT_MSK} };			\
+									\
+	(_bna)->regs.fn_int_status = (_pcidev)->pci_bar_kva +		\
+				reg_offset[(_pcidev)->pci_func].fn_int_status;\
+	(_bna)->regs.fn_int_mask = (_pcidev)->pci_bar_kva +		\
+				reg_offset[(_pcidev)->pci_func].fn_int_mask;\
+}
+
+#define ct_bit_defn_init(_bna, _pcidev)					\
+{									\
+	(_bna)->bits.mbox_status_bits = (__HFN_INT_MBOX_LPU0 |		\
+					__HFN_INT_MBOX_LPU1);		\
+	(_bna)->bits.mbox_mask_bits = (__HFN_INT_MBOX_LPU0 |		\
+					__HFN_INT_MBOX_LPU1);		\
+	(_bna)->bits.error_status_bits = (__HFN_INT_ERR_MASK);		\
+	(_bna)->bits.error_mask_bits = (__HFN_INT_ERR_MASK);		\
+	(_bna)->bits.halt_status_bits = __HFN_INT_LL_HALT;		\
+}
+
+#define ct2_reg_addr_init(_bna, _pcidev)				\
+{									\
+	(_bna)->regs.fn_int_status = (_pcidev)->pci_bar_kva +		\
+				CT2_HOSTFN_INT_STATUS;			\
+	(_bna)->regs.fn_int_mask = (_pcidev)->pci_bar_kva +		\
+				CT2_HOSTFN_INTR_MASK;			\
+}
+
+#define ct2_bit_defn_init(_bna, _pcidev)				\
+{									\
+	(_bna)->bits.mbox_status_bits = (__HFN_INT_MBOX_LPU0_CT2 |	\
+					__HFN_INT_MBOX_LPU1_CT2);	\
+	(_bna)->bits.mbox_mask_bits = (__HFN_INT_MBOX_LPU0_CT2 |	\
+					__HFN_INT_MBOX_LPU1_CT2);	\
+	(_bna)->bits.error_status_bits = (__HFN_INT_ERR_MASK_CT2);	\
+	(_bna)->bits.error_mask_bits = (__HFN_INT_ERR_MASK_CT2);	\
+	(_bna)->bits.halt_status_bits = __HFN_INT_CPQ_HALT_CT2;		\
+	(_bna)->bits.halt_mask_bits = __HFN_INT_CPQ_HALT_CT2;		\
+}
+
+#define bna_reg_addr_init(_bna, _pcidev)				\
+{									\
+	switch ((_pcidev)->device_id) {					\
+	case PCI_DEVICE_ID_BROCADE_CT:					\
+		ct_reg_addr_init((_bna), (_pcidev));			\
+		ct_bit_defn_init((_bna), (_pcidev));			\
+		break;							\
+	}								\
+}
+
+#define bna_port_id_get(_bna) ((_bna)->ioceth.ioc.port_id)
+/**
+ *
+ *  Interrupt related bits, flags and macros
+ *
+ */
+
+#define IB_STATUS_BITS		0x0000ffff
+
+#define BNA_IS_MBOX_INTR(_bna, _intr_status)				\
+	((_intr_status) & (_bna)->bits.mbox_status_bits)
+
+#define BNA_IS_HALT_INTR(_bna, _intr_status)				\
+	((_intr_status) & (_bna)->bits.halt_status_bits)
+
+#define BNA_IS_ERR_INTR(_bna, _intr_status)	\
+	((_intr_status) & (_bna)->bits.error_status_bits)
+
+#define BNA_IS_MBOX_ERR_INTR(_bna, _intr_status)	\
+	(BNA_IS_MBOX_INTR(_bna, _intr_status) |		\
+	BNA_IS_ERR_INTR(_bna, _intr_status))
+
+#define BNA_IS_INTX_DATA_INTR(_intr_status)		\
+		((_intr_status) & IB_STATUS_BITS)
+
+#define bna_halt_clear(_bna)						\
+do {									\
+	u32 init_halt;						\
+	init_halt = readl((_bna)->ioceth.ioc.ioc_regs.ll_halt);	\
+	init_halt &= ~__FW_INIT_HALT_P;					\
+	writel(init_halt, (_bna)->ioceth.ioc.ioc_regs.ll_halt);	\
+	init_halt = readl((_bna)->ioceth.ioc.ioc_regs.ll_halt);	\
+} while (0)
+
+#define bna_intx_disable(_bna, _cur_mask)				\
+{									\
+	(_cur_mask) = readl((_bna)->regs.fn_int_mask);		\
+	writel(0xffffffff, (_bna)->regs.fn_int_mask);		\
+}
+
+#define bna_intx_enable(bna, new_mask)					\
+	writel((new_mask), (bna)->regs.fn_int_mask)
+#define bna_mbox_intr_disable(bna)					\
+do {									\
+	u32 mask;							\
+	mask = readl((bna)->regs.fn_int_mask);				\
+	writel((mask | (bna)->bits.mbox_mask_bits |			\
+		(bna)->bits.error_mask_bits), (bna)->regs.fn_int_mask); \
+	mask = readl((bna)->regs.fn_int_mask);				\
+} while (0)
+
+#define bna_mbox_intr_enable(bna)					\
+do {									\
+	u32 mask;							\
+	mask = readl((bna)->regs.fn_int_mask);				\
+	writel((mask & ~((bna)->bits.mbox_mask_bits |			\
+		(bna)->bits.error_mask_bits)), (bna)->regs.fn_int_mask);\
+	mask = readl((bna)->regs.fn_int_mask);				\
+} while (0)
+
+#define bna_intr_status_get(_bna, _status)				\
+{									\
+	(_status) = readl((_bna)->regs.fn_int_status);			\
+	if (_status) {							\
+		writel(((_status) & ~(_bna)->bits.mbox_status_bits),	\
+			(_bna)->regs.fn_int_status);			\
+	}								\
+}
+
+/*
+ * MAX ACK EVENTS : No. of acks that can be accumulated in driver,
+ * before acking to h/w. The no. of bits is 16 in the doorbell register,
+ * however we keep this limited to 15 bits.
+ * This is because around the edge of 64K boundary (16 bits), one
+ * single poll can make the accumulated ACK counter cross the 64K boundary,
+ * causing problems, when we try to ack with a value greater than 64K.
+ * 15 bits (32K) should  be large enough to accumulate, anyways, and the max.
+ * acked events to h/w can be (32K + max poll weight) (currently 64).
+ */
+#define	BNA_IB_MAX_ACK_EVENTS		(1 << 15)
+
+/* These macros build the data portion of the TxQ/RxQ doorbell */
+#define BNA_DOORBELL_Q_PRD_IDX(_pi)	(0x80000000 | (_pi))
+#define BNA_DOORBELL_Q_STOP		(0x40000000)
+
+/* These macros build the data portion of the IB doorbell */
+#define BNA_DOORBELL_IB_INT_ACK(_timeout, _events)			\
+	(0x80000000 | ((_timeout) << 16) | (_events))
+#define BNA_DOORBELL_IB_INT_DISABLE	(0x40000000)
+
+/* Set the coalescing timer for the given ib */
+#define bna_ib_coalescing_timer_set(_i_dbell, _cls_timer)		\
+	((_i_dbell)->doorbell_ack = BNA_DOORBELL_IB_INT_ACK((_cls_timer), 0));
+
+/* Acks 'events' # of events for a given ib while disabling interrupts */
+#define bna_ib_ack_disable_irq(_i_dbell, _events)			\
+	(writel(BNA_DOORBELL_IB_INT_ACK(0, (_events)), \
+		(_i_dbell)->doorbell_addr));
+
+/* Acks 'events' # of events for a given ib */
+#define bna_ib_ack(_i_dbell, _events)					\
+	(writel(((_i_dbell)->doorbell_ack | (_events)), \
+		(_i_dbell)->doorbell_addr));
+
+#define bna_ib_start(_bna, _ib, _is_regular)				\
+{									\
+	u32 intx_mask;						\
+	struct bna_ib *ib = _ib;					\
+	if ((ib->intr_type == BNA_INTR_T_INTX)) {			\
+		bna_intx_disable((_bna), intx_mask);			\
+		intx_mask &= ~(ib->intr_vector);			\
+		bna_intx_enable((_bna), intx_mask);			\
+	}								\
+	bna_ib_coalescing_timer_set(&ib->door_bell,			\
+			ib->coalescing_timeo);				\
+	if (_is_regular)						\
+		bna_ib_ack(&ib->door_bell, 0);				\
+}
+
+#define bna_ib_stop(_bna, _ib)						\
+{									\
+	u32 intx_mask;						\
+	struct bna_ib *ib = _ib;					\
+	writel(BNA_DOORBELL_IB_INT_DISABLE,				\
+		ib->door_bell.doorbell_addr);				\
+	if (ib->intr_type == BNA_INTR_T_INTX) {				\
+		bna_intx_disable((_bna), intx_mask);			\
+		intx_mask |= ib->intr_vector;				\
+		bna_intx_enable((_bna), intx_mask);			\
+	}								\
+}
+
+#define bna_txq_prod_indx_doorbell(_tcb)				\
+	(writel(BNA_DOORBELL_Q_PRD_IDX((_tcb)->producer_index), \
+		(_tcb)->q_dbell));
+
+#define bna_rxq_prod_indx_doorbell(_rcb)				\
+	(writel(BNA_DOORBELL_Q_PRD_IDX((_rcb)->producer_index), \
+		(_rcb)->q_dbell));
+
+/**
+ *
+ * TxQ, RxQ, CQ related bits, offsets, macros
+ *
+ */
+
+/* TxQ Entry Opcodes */
+#define BNA_TXQ_WI_SEND			(0x402)	/* Single Frame Transmission */
+#define BNA_TXQ_WI_SEND_LSO		(0x403)	/* Multi-Frame Transmission */
+#define BNA_TXQ_WI_EXTENSION		(0x104)	/* Extension WI */
+
+/* TxQ Entry Control Flags */
+#define BNA_TXQ_WI_CF_FCOE_CRC		(1 << 8)
+#define BNA_TXQ_WI_CF_IPID_MODE		(1 << 5)
+#define BNA_TXQ_WI_CF_INS_PRIO		(1 << 4)
+#define BNA_TXQ_WI_CF_INS_VLAN		(1 << 3)
+#define BNA_TXQ_WI_CF_UDP_CKSUM		(1 << 2)
+#define BNA_TXQ_WI_CF_TCP_CKSUM		(1 << 1)
+#define BNA_TXQ_WI_CF_IP_CKSUM		(1 << 0)
+
+#define BNA_TXQ_WI_L4_HDR_N_OFFSET(_hdr_size, _offset) \
+		(((_hdr_size) << 10) | ((_offset) & 0x3FF))
+
+/*
+ * Completion Q defines
+ */
+/* CQ Entry Flags */
+#define	BNA_CQ_EF_MAC_ERROR	(1 <<  0)
+#define	BNA_CQ_EF_FCS_ERROR	(1 <<  1)
+#define	BNA_CQ_EF_TOO_LONG	(1 <<  2)
+#define	BNA_CQ_EF_FC_CRC_OK	(1 <<  3)
+
+#define	BNA_CQ_EF_RSVD1		(1 <<  4)
+#define	BNA_CQ_EF_L4_CKSUM_OK	(1 <<  5)
+#define	BNA_CQ_EF_L3_CKSUM_OK	(1 <<  6)
+#define	BNA_CQ_EF_HDS_HEADER	(1 <<  7)
+
+#define	BNA_CQ_EF_UDP		(1 <<  8)
+#define	BNA_CQ_EF_TCP		(1 <<  9)
+#define	BNA_CQ_EF_IP_OPTIONS	(1 << 10)
+#define	BNA_CQ_EF_IPV6		(1 << 11)
+
+#define	BNA_CQ_EF_IPV4		(1 << 12)
+#define	BNA_CQ_EF_VLAN		(1 << 13)
+#define	BNA_CQ_EF_RSS		(1 << 14)
+#define	BNA_CQ_EF_RSVD2		(1 << 15)
+
+#define	BNA_CQ_EF_MCAST_MATCH   (1 << 16)
+#define	BNA_CQ_EF_MCAST		(1 << 17)
+#define BNA_CQ_EF_BCAST		(1 << 18)
+#define	BNA_CQ_EF_REMOTE	(1 << 19)
+
+#define	BNA_CQ_EF_LOCAL		(1 << 20)
+
+/**
+ *
+ * Data structures
+ *
+ */
+
+struct bna_reg_offset {
+	u32 fn_int_status;
+	u32 fn_int_mask;
+};
+
+struct bna_bit_defn {
+	u32 mbox_status_bits;
+	u32 mbox_mask_bits;
+	u32 error_status_bits;
+	u32 error_mask_bits;
+	u32 halt_status_bits;
+	u32 halt_mask_bits;
+};
+
+struct bna_reg {
+	void __iomem *fn_int_status;
+	void __iomem *fn_int_mask;
+};
+
+/* TxQ Vector (a.k.a. Tx-Buffer Descriptor) */
+struct bna_dma_addr {
+	u32		msb;
+	u32		lsb;
+};
+
+struct bna_txq_wi_vector {
+	u16		reserved;
+	u16		length;		/* Only 14 LSB are valid */
+	struct bna_dma_addr host_addr; /* Tx-Buf DMA addr */
+};
+
+/**
+ *  TxQ Entry Structure
+ *
+ *  BEWARE:  Load values into this structure with correct endianess.
+ */
+struct bna_txq_entry {
+	union {
+		struct {
+			u8 reserved;
+			u8 num_vectors;	/* number of vectors present */
+			u16 opcode; /* Either */
+						    /* BNA_TXQ_WI_SEND or */
+						    /* BNA_TXQ_WI_SEND_LSO */
+			u16 flags; /* OR of all the flags */
+			u16 l4_hdr_size_n_offset;
+			u16 vlan_tag;
+			u16 lso_mss;	/* Only 14 LSB are valid */
+			u32 frame_length;	/* Only 24 LSB are valid */
+		} wi;
+
+		struct {
+			u16 reserved;
+			u16 opcode; /* Must be */
+						    /* BNA_TXQ_WI_EXTENSION */
+			u32 reserved2[3];	/* Place holder for */
+						/* removed vector (12 bytes) */
+		} wi_ext;
+	} hdr;
+	struct bna_txq_wi_vector vector[4];
+};
+
+/* RxQ Entry Structure */
+struct bna_rxq_entry {		/* Rx-Buffer */
+	struct bna_dma_addr host_addr; /* Rx-Buffer DMA address */
+};
+
+/* CQ Entry Structure */
+struct bna_cq_entry {
+	u32 flags;
+	u16 vlan_tag;
+	u16 length;
+	u32 rss_hash;
+	u8 valid;
+	u8 reserved1;
+	u8 reserved2;
+	u8 rxq_id;
+};
+
+#endif /* __BNA_HW_DEFS_H__ */
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists