| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1313033278-7337-3-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Wed, 10 Aug 2011 20:27:50 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...dhat.com, sassmann@...hat.com,
Steffen Klassert <klassert@...hematik.tu-chemnitz.de>,
David Dillow <dave@...dillows.org>,
Jes Sorensen <jes@...ined-monkey.org>,
Alan Cox <alan@...ux.intel.com>,
David Hinds <dahinds@...rs.sourceforge.net>
Subject: [net-next 02/10] 3c*/acenic/typhoon: Move 3Com Ethernet drivers
Moves the 3Com drivers into drivers/net/ethernet/3com/ and the necessary
Kconfig and Makefile changes.
Did not move the following drivers becuase they use a non-3Com
chipset: 3c503, 3c505, 3c507, 3c523 and 3c527
CC: Steffen Klassert <klassert@...hematik.tu-chemnitz.de>
CC: David Dillow <dave@...dillows.org>
CC: Jes Sorensen <jes@...ined-monkey.org>
CC: Alan Cox <alan@...ux.intel.com>
CC: David Hinds <dahinds@...rs.sourceforge.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Acked-by: David Dillow <dave@...dillows.org>
---
MAINTAINERS | 6 +-
drivers/net/Kconfig | 138 ++-------------------
drivers/net/Makefile | 7 +-
drivers/net/{ => ethernet/3com}/3c501.c | 0
drivers/net/{ => ethernet/3com}/3c501.h | 0
drivers/net/{ => ethernet/3com}/3c509.c | 0
drivers/net/{ => ethernet/3com}/3c515.c | 0
drivers/net/{pcmcia => ethernet/3com}/3c574_cs.c | 0
drivers/net/{pcmcia => ethernet/3com}/3c589_cs.c | 0
drivers/net/{ => ethernet/3com}/3c59x.c | 0
drivers/net/ethernet/3com/Kconfig | 147 ++++++++++++++++++++++
drivers/net/ethernet/3com/Makefile | 12 ++
drivers/net/{ => ethernet/3com}/acenic.c | 0
drivers/net/{ => ethernet/3com}/acenic.h | 0
drivers/net/{ => ethernet/3com}/typhoon.c | 0
drivers/net/{ => ethernet/3com}/typhoon.h | 0
drivers/net/ethernet/Kconfig | 2 +
drivers/net/ethernet/Makefile | 2 +
drivers/net/pcmcia/Kconfig | 18 ---
drivers/net/pcmcia/Makefile | 2 -
20 files changed, 176 insertions(+), 158 deletions(-)
rename drivers/net/{ => ethernet/3com}/3c501.c (100%)
rename drivers/net/{ => ethernet/3com}/3c501.h (100%)
rename drivers/net/{ => ethernet/3com}/3c509.c (100%)
rename drivers/net/{ => ethernet/3com}/3c515.c (100%)
rename drivers/net/{pcmcia => ethernet/3com}/3c574_cs.c (100%)
rename drivers/net/{pcmcia => ethernet/3com}/3c589_cs.c (100%)
rename drivers/net/{ => ethernet/3com}/3c59x.c (100%)
create mode 100644 drivers/net/ethernet/3com/Kconfig
create mode 100644 drivers/net/ethernet/3com/Makefile
rename drivers/net/{ => ethernet/3com}/acenic.c (100%)
rename drivers/net/{ => ethernet/3com}/acenic.h (100%)
rename drivers/net/{ => ethernet/3com}/typhoon.c (100%)
rename drivers/net/{ => ethernet/3com}/typhoon.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 51d42fb..112e226 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -124,13 +124,13 @@ M: Steffen Klassert <klassert@...hematik.tu-chemnitz.de>
L: netdev@...r.kernel.org
S: Maintained
F: Documentation/networking/vortex.txt
-F: drivers/net/3c59x.c
+F: drivers/net/ethernet/3com/3c59x.c
3CR990 NETWORK DRIVER
M: David Dillow <dave@...dillows.org>
L: netdev@...r.kernel.org
S: Maintained
-F: drivers/net/typhoon*
+F: drivers/net/ethernet/3com/typhoon*
3WARE SAS/SATA-RAID SCSI DRIVERS (3W-XXXX, 3W-9XXX, 3W-SAS)
M: Adam Radford <linuxraid@....com>
@@ -214,7 +214,7 @@ ACENIC DRIVER
M: Jes Sorensen <jes@...ined-monkey.org>
L: linux-acenic@...site.dk
S: Maintained
-F: drivers/net/acenic*
+F: drivers/net/ethernet/3com/acenic*
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
M: Peter Feuerer <peter@...e.net>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5b95796..0b3ea21 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -616,38 +616,11 @@ config SUNVNET
help
Support for virtual network devices under Sun Logical Domains.
-config NET_VENDOR_3COM
- bool "3COM cards"
- depends on ISA || EISA || MCA || PCI
- help
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about 3COM cards. If you say Y, you will be asked for
- your specific card in the following questions.
-
-config EL1
- tristate "3c501 \"EtherLink\" support"
- depends on NET_VENDOR_3COM && ISA
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Also, consider buying a
- new card, since the 3c501 is slow, broken, and obsolete: you will
- have problems. Some people suggest to ping ("man ping") a nearby
- machine every minute ("man cron") when using this card.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c501.
-
config EL2
tristate "3c503 \"EtherLink II\" support"
- depends on NET_VENDOR_3COM && ISA
+ depends on ISA
select CRC32
- help
+ ---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
@@ -657,7 +630,7 @@ config EL2
config ELPLUS
tristate "3c505 \"EtherLink Plus\" support"
- depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
+ depends on ISA && ISA_DMA_API
---help---
Information about this network (Ethernet) card can be found in
<file:Documentation/networking/3c505.txt>. If you have a card of
@@ -669,8 +642,8 @@ config ELPLUS
config EL16
tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
- depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
- help
+ depends on ISA && EXPERIMENTAL
+ ---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
@@ -678,36 +651,10 @@ config EL16
To compile this driver as a module, choose M here. The module
will be called 3c507.
-config EL3
- tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
- depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
- ---help---
- If you have a network (Ethernet) card belonging to the 3Com
- EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
- from <http://www.tldp.org/docs.html#howto>.
-
- If your card is not working you may need to use the DOS
- setup disk to disable Plug & Play mode, and to select the default
- media type.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c509.
-
-config 3C515
- tristate "3c515 ISA \"Fast EtherLink\""
- depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
- help
- If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
- network card, say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c515.
-
config ELMC
tristate "3c523 \"EtherLink/MC\" support"
- depends on NET_VENDOR_3COM && MCA_LEGACY
- help
+ depends on MCA_LEGACY
+ ---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
@@ -717,54 +664,14 @@ config ELMC
config ELMC_II
tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
- depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c527.
-
-config VORTEX
- tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
- depends on NET_VENDOR_3COM && (PCI || EISA)
- select MII
- ---help---
- This option enables driver support for a large number of 10Mbps and
- 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
-
- "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
- "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
- "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
- "Tornado" (3c905) PCI
- "Hurricane" (3c555/3cSOHO) PCI
-
- If you have such a card, say Y and read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>. More
- specific information is in
- <file:Documentation/networking/vortex.txt> and in the comments at
- the beginning of <file:drivers/net/3c59x.c>.
-
- To compile this support as a module, choose M here.
-
-config TYPHOON
- tristate "3cr990 series \"Typhoon\" support"
- depends on NET_VENDOR_3COM && PCI
- select CRC32
+ depends on MCA && MCA_LEGACY
---help---
- This option enables driver support for the 3cr990 series of cards:
-
- 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
- 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
- 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
-
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
- will be called typhoon.
+ will be called 3c527.
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
@@ -2046,33 +1953,6 @@ menuconfig NETDEV_1000
if NETDEV_1000
-config ACENIC
- tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
- depends on PCI
- ---help---
- Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
- GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
- adapter. The driver allows for using the Jumbo Frame option (9000
- bytes/frame) however it requires that your switches can handle this
- as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
- line.
-
- To compile this driver as a module, choose M here: the
- module will be called acenic.
-
-config ACENIC_OMIT_TIGON_I
- bool "Omit support for old Tigon I based AceNICs"
- depends on ACENIC
- help
- Say Y here if you only have Tigon II based AceNICs and want to leave
- out support for the older Tigon I based cards which are no longer
- being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
- version)). This will reduce the size of the driver object by
- app. 100KB. If you are not sure whether your card is a Tigon I or a
- Tigon II, say N here.
-
- The safe and default value for this is N.
-
config DL2K
tristate "DL2000/TC902x-based Gigabit Ethernet support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 670b514..d4d6744 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -66,8 +66,6 @@ obj-$(CONFIG_SUNVNET) += sunvnet.o
obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
-obj-$(CONFIG_VORTEX) += 3c59x.o
-obj-$(CONFIG_TYPHOON) += typhoon.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
obj-$(CONFIG_PCNET32) += pcnet32.o
obj-$(CONFIG_E100) += e100.o
@@ -78,7 +76,6 @@ obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
-obj-$(CONFIG_ACENIC) += acenic.o
obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
obj-$(CONFIG_NATSEMI) += natsemi.o
obj-$(CONFIG_NS83820) += ns83820.o
@@ -187,13 +184,10 @@ obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_EL1) += 3c501.o
obj-$(CONFIG_EL16) += 3c507.o
obj-$(CONFIG_ELMC) += 3c523.o
obj-$(CONFIG_IBMLANA) += ibmlana.o
obj-$(CONFIG_ELMC_II) += 3c527.o
-obj-$(CONFIG_EL3) += 3c509.o
-obj-$(CONFIG_3C515) += 3c515.o
obj-$(CONFIG_EEXPRESS) += eexpress.o
obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
obj-$(CONFIG_8139CP) += 8139cp.o
@@ -269,6 +263,7 @@ obj-$(CONFIG_S6GMAC) += s6gmac.o
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
+obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_TR) += tokenring/
obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_ARCNET) += arcnet/
diff --git a/drivers/net/3c501.c b/drivers/net/ethernet/3com/3c501.c
similarity index 100%
rename from drivers/net/3c501.c
rename to drivers/net/ethernet/3com/3c501.c
diff --git a/drivers/net/3c501.h b/drivers/net/ethernet/3com/3c501.h
similarity index 100%
rename from drivers/net/3c501.h
rename to drivers/net/ethernet/3com/3c501.h
diff --git a/drivers/net/3c509.c b/drivers/net/ethernet/3com/3c509.c
similarity index 100%
rename from drivers/net/3c509.c
rename to drivers/net/ethernet/3com/3c509.c
diff --git a/drivers/net/3c515.c b/drivers/net/ethernet/3com/3c515.c
similarity index 100%
rename from drivers/net/3c515.c
rename to drivers/net/ethernet/3com/3c515.c
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c
similarity index 100%
rename from drivers/net/pcmcia/3c574_cs.c
rename to drivers/net/ethernet/3com/3c574_cs.c
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c
similarity index 100%
rename from drivers/net/pcmcia/3c589_cs.c
rename to drivers/net/ethernet/3com/3c589_cs.c
diff --git a/drivers/net/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
similarity index 100%
rename from drivers/net/3c59x.c
rename to drivers/net/ethernet/3com/3c59x.c
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
new file mode 100644
index 0000000..497f038
--- /dev/null
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -0,0 +1,147 @@
+#
+# 3Com Ethernet device configuration
+#
+
+config NET_VENDOR_3COM
+ bool "3Com devices"
+ depends on ISA || EISA || MCA || PCI || PCMCIA
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about 3Com cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_3COM
+
+config EL1
+ tristate "3c501 \"EtherLink\" support"
+ depends on ISA
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Also, consider buying a
+ new card, since the 3c501 is slow, broken, and obsolete: you will
+ have problems. Some people suggest to ping ("man ping") a nearby
+ machine every minute ("man cron") when using this card.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c501.
+
+config EL3
+ tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
+ depends on (ISA || EISA || MCA)
+ ---help---
+ If you have a network (Ethernet) card belonging to the 3Com
+ EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
+ from <http://www.tldp.org/docs.html#howto>.
+
+ If your card is not working you may need to use the DOS
+ setup disk to disable Plug & Play mode, and to select the default
+ media type.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c509.
+
+config 3C515
+ tristate "3c515 ISA \"Fast EtherLink\""
+ depends on (ISA || EISA) && ISA_DMA_API
+ ---help---
+ If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
+ network card, say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c515.
+
+config PCMCIA_3C574
+ tristate "3Com 3c574 PCMCIA support"
+ depends on PCMCIA
+ ---help---
+ Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
+ (PC-card) Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 3c574_cs. If unsure, say N.
+
+config PCMCIA_3C589
+ tristate "3Com 3c589 PCMCIA support"
+ depends on PCMCIA
+ ---help---
+ Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
+ (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 3c589_cs. If unsure, say N.
+
+config VORTEX
+ tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
+ depends on (PCI || EISA)
+ select MII
+ ---help---
+ This option enables driver support for a large number of 10Mbps and
+ 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
+
+ "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+ "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
+ "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
+ "Tornado" (3c905) PCI
+ "Hurricane" (3c555/3cSOHO) PCI
+
+ If you have such a card, say Y and read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>. More
+ specific information is in
+ <file:Documentation/networking/vortex.txt> and in the comments at
+ the beginning of <file:drivers/net/3c59x.c>.
+
+ To compile this support as a module, choose M here.
+
+config TYPHOON
+ tristate "3cr990 series \"Typhoon\" support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This option enables driver support for the 3cr990 series of cards:
+
+ 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
+ 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
+ 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
+
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called typhoon.
+
+config ACENIC
+ tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
+ depends on PCI
+ ---help---
+ Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
+ GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
+ adapter. The driver allows for using the Jumbo Frame option (9000
+ bytes/frame) however it requires that your switches can handle this
+ as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
+ line.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acenic.
+
+config ACENIC_OMIT_TIGON_I
+ bool "Omit support for old Tigon I based AceNICs"
+ depends on ACENIC
+ ---help---
+ Say Y here if you only have Tigon II based AceNICs and want to leave
+ out support for the older Tigon I based cards which are no longer
+ being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
+ version)). This will reduce the size of the driver object by
+ app. 100KB. If you are not sure whether your card is a Tigon I or a
+ Tigon II, say N here.
+
+ The safe and default value for this is N.
+
+endif # NET_VENDOR_3COM
diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile
new file mode 100644
index 0000000..96d1d60
--- /dev/null
+++ b/drivers/net/ethernet/3com/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the 3Com Ethernet device drivers
+#
+
+obj-$(CONFIG_EL1) += 3c501.o
+obj-$(CONFIG_EL3) += 3c509.o
+obj-$(CONFIG_3C515) += 3c515.o
+obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
+obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
+obj-$(CONFIG_VORTEX) += 3c59x.o
+obj-$(CONFIG_ACENIC) += acenic.o
+obj-$(CONFIG_TYPHOON) += typhoon.o
diff --git a/drivers/net/acenic.c b/drivers/net/ethernet/3com/acenic.c
similarity index 100%
rename from drivers/net/acenic.c
rename to drivers/net/ethernet/3com/acenic.c
diff --git a/drivers/net/acenic.h b/drivers/net/ethernet/3com/acenic.h
similarity index 100%
rename from drivers/net/acenic.h
rename to drivers/net/ethernet/3com/acenic.h
diff --git a/drivers/net/typhoon.c b/drivers/net/ethernet/3com/typhoon.c
similarity index 100%
rename from drivers/net/typhoon.c
rename to drivers/net/ethernet/3com/typhoon.c
diff --git a/drivers/net/typhoon.h b/drivers/net/ethernet/3com/typhoon.h
similarity index 100%
rename from drivers/net/typhoon.h
rename to drivers/net/ethernet/3com/typhoon.h
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index d59e4f2..18193ec 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -11,4 +11,6 @@ menuconfig ETHERNET
if ETHERNET
+source "drivers/net/ethernet/3com/Kconfig"
+
endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 0d21dda..07766ba 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -1,3 +1,5 @@
#
# Makefile for the Linux network Ethernet device drivers.
#
+
+obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index 9b8f793..b67c5ed 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -21,24 +21,6 @@ menuconfig NET_PCMCIA
if NET_PCMCIA && PCMCIA
-config PCMCIA_3C589
- tristate "3Com 3c589 PCMCIA support"
- help
- Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
- (PC-card) Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called 3c589_cs. If unsure, say N.
-
-config PCMCIA_3C574
- tristate "3Com 3c574 PCMCIA support"
- help
- Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
- (PC-card) Fast Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called 3c574_cs. If unsure, say N.
-
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
select CRC32
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
index 87d2d99..2f2ab3b 100644
--- a/drivers/net/pcmcia/Makefile
+++ b/drivers/net/pcmcia/Makefile
@@ -3,8 +3,6 @@
#
# 16-bit client drivers
-obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
-obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o
obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists