| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1313056294-28426-9-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Thu, 11 Aug 2011 02:51:32 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, sassmann@...hat.com, Jon Mason <jdmason@...zu.us>
Subject: [net-next 08/10] s2io/vxge: Move the Exar drivers
Move the Exar drivers into drivers/net/ethernet/neterion/ and make the
necessary Kconfig and Makefile changes.
CC: Jon Mason <jdmason@...zu.us>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
MAINTAINERS | 3 +-
drivers/net/Kconfig | 34 ------------
drivers/net/Makefile | 2 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/neterion/Kconfig | 54 ++++++++++++++++++++
drivers/net/ethernet/neterion/Makefile | 6 ++
drivers/net/{ => ethernet/neterion}/s2io-regs.h | 0
drivers/net/{ => ethernet/neterion}/s2io.c | 0
drivers/net/{ => ethernet/neterion}/s2io.h | 0
drivers/net/{ => ethernet/neterion}/vxge/Makefile | 0
.../net/{ => ethernet/neterion}/vxge/vxge-config.c | 0
.../net/{ => ethernet/neterion}/vxge/vxge-config.h | 0
.../{ => ethernet/neterion}/vxge/vxge-ethtool.c | 0
.../{ => ethernet/neterion}/vxge/vxge-ethtool.h | 0
.../net/{ => ethernet/neterion}/vxge/vxge-main.c | 0
.../net/{ => ethernet/neterion}/vxge/vxge-main.h | 0
.../net/{ => ethernet/neterion}/vxge/vxge-reg.h | 0
.../{ => ethernet/neterion}/vxge/vxge-traffic.c | 0
.../{ => ethernet/neterion}/vxge/vxge-traffic.h | 0
.../{ => ethernet/neterion}/vxge/vxge-version.h | 0
21 files changed, 63 insertions(+), 38 deletions(-)
create mode 100644 drivers/net/ethernet/neterion/Kconfig
create mode 100644 drivers/net/ethernet/neterion/Makefile
rename drivers/net/{ => ethernet/neterion}/s2io-regs.h (100%)
rename drivers/net/{ => ethernet/neterion}/s2io.c (100%)
rename drivers/net/{ => ethernet/neterion}/s2io.h (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/Makefile (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/vxge-config.c (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/vxge-config.h (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/vxge-ethtool.c (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/vxge-ethtool.h (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/vxge-main.c (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/vxge-main.h (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/vxge-reg.h (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/vxge-traffic.c (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/vxge-traffic.h (100%)
rename drivers/net/{ => ethernet/neterion}/vxge/vxge-version.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 0a5ae23..bcfc144 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4380,9 +4380,8 @@ W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
S: Supported
F: Documentation/networking/s2io.txt
-F: drivers/net/s2io*
F: Documentation/networking/vxge.txt
-F: drivers/net/vxge/
+F: drivers/net/ethernet/neterion/
NETFILTER/IPTABLES/IPCHAINS
P: Rusty Russell
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 38fcaea..3e216b3 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1485,40 +1485,6 @@ config ENIC
help
This enables the support for the Cisco VIC Ethernet card.
-config S2IO
- tristate "Exar Xframe 10Gb Ethernet Adapter"
- depends on PCI
- ---help---
- This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/s2io.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called s2io.
-
-config VXGE
- tristate "Exar X3100 Series 10GbE PCIe Server Adapter"
- depends on PCI && INET
- ---help---
- This driver supports Exar Corp's X3100 Series 10 GbE PCIe
- I/O Virtualized Server Adapter.
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/vxge.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called vxge.
-
-config VXGE_DEBUG_TRACE_ALL
- bool "Enabling All Debug trace statments in driver"
- default n
- depends on VXGE
- ---help---
- Say Y here if you want to enabling all the debug trace statements in
- the vxge driver. By default only few debug trace statements are
- enabled.
-
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
depends on PPC_PASEMI && PCI && INET
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index b9e1f5a..d28c153e 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -149,8 +149,6 @@ obj-$(CONFIG_NET_NETX) += netx-eth.o
obj-$(CONFIG_DL2K) += dl2k.o
obj-$(CONFIG_R8169) += r8169.o
obj-$(CONFIG_IBMVETH) += ibmveth.o
-obj-$(CONFIG_S2IO) += s2io.o
-obj-$(CONFIG_VXGE) += vxge/
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index ce3040d..1a39ec0 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -18,6 +18,7 @@ source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/emulex/Kconfig"
+source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index b4dcb93..4c21e8f 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
+obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
diff --git a/drivers/net/ethernet/neterion/Kconfig b/drivers/net/ethernet/neterion/Kconfig
new file mode 100644
index 0000000..3d98e62
--- /dev/null
+++ b/drivers/net/ethernet/neterion/Kconfig
@@ -0,0 +1,54 @@
+#
+# Exar device configuration
+#
+
+config NET_VENDOR_EXAR
+ bool "Exar devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say
+ Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Exar cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_EXAR
+
+config S2IO
+ tristate "Exar Xframe 10Gb Ethernet Adapter"
+ depends on PCI
+ ---help---
+ This driver supports Exar Corp's Xframe Series 10Gb Ethernet Adapters.
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/s2io.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called s2io.
+
+config VXGE
+ tristate "Exar X3100 Series 10GbE PCIe Server Adapter"
+ depends on PCI && INET
+ ---help---
+ This driver supports Exar Corp's X3100 Series 10 GbE PCIe
+ I/O Virtualized Server Adapter.
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/vxge.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called vxge.
+
+config VXGE_DEBUG_TRACE_ALL
+ bool "Enabling All Debug trace statements in driver"
+ default n
+ depends on VXGE
+ ---help---
+ Say Y here if you want to enabling all the debug trace statements in
+ the vxge driver. By default only few debug trace statements are
+ enabled.
+
+endif # NET_VENDOR_EXAR
diff --git a/drivers/net/ethernet/neterion/Makefile b/drivers/net/ethernet/neterion/Makefile
new file mode 100644
index 0000000..70c8058
--- /dev/null
+++ b/drivers/net/ethernet/neterion/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Exar network device drivers.
+#
+
+obj-$(CONFIG_S2IO) += s2io.o
+obj-$(CONFIG_VXGE) += vxge/
diff --git a/drivers/net/s2io-regs.h b/drivers/net/ethernet/neterion/s2io-regs.h
similarity index 100%
rename from drivers/net/s2io-regs.h
rename to drivers/net/ethernet/neterion/s2io-regs.h
diff --git a/drivers/net/s2io.c b/drivers/net/ethernet/neterion/s2io.c
similarity index 100%
rename from drivers/net/s2io.c
rename to drivers/net/ethernet/neterion/s2io.c
diff --git a/drivers/net/s2io.h b/drivers/net/ethernet/neterion/s2io.h
similarity index 100%
rename from drivers/net/s2io.h
rename to drivers/net/ethernet/neterion/s2io.h
diff --git a/drivers/net/vxge/Makefile b/drivers/net/ethernet/neterion/vxge/Makefile
similarity index 100%
rename from drivers/net/vxge/Makefile
rename to drivers/net/ethernet/neterion/vxge/Makefile
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/ethernet/neterion/vxge/vxge-config.c
similarity index 100%
rename from drivers/net/vxge/vxge-config.c
rename to drivers/net/ethernet/neterion/vxge/vxge-config.c
diff --git a/drivers/net/vxge/vxge-config.h b/drivers/net/ethernet/neterion/vxge/vxge-config.h
similarity index 100%
rename from drivers/net/vxge/vxge-config.h
rename to drivers/net/ethernet/neterion/vxge/vxge-config.h
diff --git a/drivers/net/vxge/vxge-ethtool.c b/drivers/net/ethernet/neterion/vxge/vxge-ethtool.c
similarity index 100%
rename from drivers/net/vxge/vxge-ethtool.c
rename to drivers/net/ethernet/neterion/vxge/vxge-ethtool.c
diff --git a/drivers/net/vxge/vxge-ethtool.h b/drivers/net/ethernet/neterion/vxge/vxge-ethtool.h
similarity index 100%
rename from drivers/net/vxge/vxge-ethtool.h
rename to drivers/net/ethernet/neterion/vxge/vxge-ethtool.h
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
similarity index 100%
rename from drivers/net/vxge/vxge-main.c
rename to drivers/net/ethernet/neterion/vxge/vxge-main.c
diff --git a/drivers/net/vxge/vxge-main.h b/drivers/net/ethernet/neterion/vxge/vxge-main.h
similarity index 100%
rename from drivers/net/vxge/vxge-main.h
rename to drivers/net/ethernet/neterion/vxge/vxge-main.h
diff --git a/drivers/net/vxge/vxge-reg.h b/drivers/net/ethernet/neterion/vxge/vxge-reg.h
similarity index 100%
rename from drivers/net/vxge/vxge-reg.h
rename to drivers/net/ethernet/neterion/vxge/vxge-reg.h
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/ethernet/neterion/vxge/vxge-traffic.c
similarity index 100%
rename from drivers/net/vxge/vxge-traffic.c
rename to drivers/net/ethernet/neterion/vxge/vxge-traffic.c
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/ethernet/neterion/vxge/vxge-traffic.h
similarity index 100%
rename from drivers/net/vxge/vxge-traffic.h
rename to drivers/net/ethernet/neterion/vxge/vxge-traffic.h
diff --git a/drivers/net/vxge/vxge-version.h b/drivers/net/ethernet/neterion/vxge/vxge-version.h
similarity index 100%
rename from drivers/net/vxge/vxge-version.h
rename to drivers/net/ethernet/neterion/vxge/vxge-version.h
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists