| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 22 Aug 2011 19:45:21 +0800 From: Brad Campbell <lists2009@...rfbargle.com> To: Eric Dumazet <eric.dumazet@...il.com> CC: Avi Kivity <avi@...hat.com>, CaT <cat@....com.au>, Borislav Petkov <bp@...en8.de>, linux-kernel@...r.kernel.org, kvm@...r.kernel.org, netdev <netdev@...r.kernel.org> Subject: Re: KVM induced panic on 2.6.38[2367] & 2.6.39 On 22/08/11 14:45, Eric Dumazet wrote: > Le lundi 22 août 2011 à 09:36 +0300, Avi Kivity a écrit : >> On 08/20/2011 04:16 PM, Brad Campbell wrote: >>> Author: Alexander Duyck<alexander.h.duyck@...el.com> >>> Date: Thu Jul 1 13:28:27 2010 +0000 >>> >>> x86: Drop CONFIG_MCORE2 check around setting of NET_IP_ALIGN >>> >>> This patch removes the CONFIG_MCORE2 check from around >>> NET_IP_ALIGN. It is >>> based on a suggestion from Andi Kleen. The assumption is that >>> there are >>> not any x86 cores where unaligned access is really slow, and this >>> change >>> would allow for a performance improvement to still exist on >>> configurations >>> that are not necessarily optimized for Core 2. >>> >>> Cc: Andi Kleen<ak@...ux.intel.com> >>> Cc: Thomas Gleixner<tglx@...utronix.de> >>> Cc: Ingo Molnar<mingo@...hat.com> >>> Cc: "H. Peter Anvin"<hpa@...or.com> >>> Cc: x86@...nel.org >>> Signed-off-by: Alexander Duyck<alexander.h.duyck@...el.com> >>> Signed-off-by: Jeff Kirsher<jeffrey.t.kirsher@...el.com> >>> Acked-by: H. Peter Anvin<hpa@...or.com> >>> Signed-off-by: David S. Miller<davem@...emloft.net> >>> >>> :040000 040000 5a15867789080a2f67a74b17c4422f85b7a9fb4a >>> b98769348bd765731ca3ff03b33764257e23226c M arch >>> >>> I can confirm this bug exists in the 3.0 kernel, however I'm unable to >>> reproduce it on todays git. >>> >>> So anyone using netfilter, kvm and bridge on kernels between >>> 2.6.36-rc1 and 3.0 may hit this bug, but it looks like it is fixed in >>> the current 3.1-rc kernels. >>> >> >> Thanks for this effort. I don't think this patch is buggy in itself, it >> merely exposed another bug which was fixed later on. >> > > Some piece of hardware has a 2-byte offset requirement, and driver > incorrectly assumed NET_IP_ALIGN was 2 on x86. > > Brad, could you post your config (lsmod, dmesg) again ? > > tg3.c code for example uses a private value, not related to NET_IP_ALIGN > > #define TG3_RAW_IP_ALIGN 2 Both sets of hardware were using Marvell 88e1116 chips (the r8169 driver). Interestingly on the hardware I just used to reproduce the fault the network path is VM1 -> br1 -> eth0 -> DNAT -> br1 -> VM2 On the machine that originally exhibited the fault the network path was VM1 -> br1 -> ppp0 -> DNAT -> br1 -> VM2 So on the original machine the packet never even goes near a physical interface. The problem only exhibited itself if I tried to use the address of eth0 or ppp0 to get to VM2 from VM1. If I went dirctly from VM1 to VM2 using local addresses and never traversed netfilter it never paniced. I also agree the patch I identified simply unmasked an underlying issue, and of course on anything later than the linus 3.0 kernel I can't reproduce it now anyway. It's nice to know its fixed, but it'd be nice to know *what* fixed it rather than it just went away after some code re-factoring. I did have a perverse thought about doing a bisect between 3.0.0 and 3.1-rc2 to see precisely *what* fixed the problem, but the thought of another 7 hours of crash and burn is not overly appealing. [ 0.000000] Linux version 3.0.0 (brad@srv) (gcc version 4.4.5 (Debian 4.4.5-8) ) #5 SMP Mon Jul 25 22:43:34 WST 2011 [ 0.000000] Command line: BOOT_IMAGE=/bzImage root=UUID=9162858d-df5e-43d6-8331-6d2b65082b4c ro panic=5 netconsole=6666@....168.2.1/eth0,5050@....168.2.87/00:16:cb:a7:dd:d1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dbf80000 (usable) [ 0.000000] BIOS-e820: 00000000dbf80000 - 00000000dffa0000 (reserved) [ 0.000000] BIOS-e820: 00000000dffa0000 - 00000000dffb0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dffb0000 - 00000000dffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dffe0000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000420000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./880G Extreme3, BIOS P1.70 06/21/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x420000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000420000000 aka 16896M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdbf80 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 8192 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000dbf80000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00dbe00000 page 2M [ 0.000000] 00dbe00000 - 00dbf80000 page 4k [ 0.000000] kernel direct mapping tables up to dbf80000 @ dbf7d000-dbf80000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000420000000 [ 0.000000] 0100000000 - 0400000000 page 1G [ 0.000000] 0400000000 - 0420000000 page 2M [ 0.000000] kernel direct mapping tables up to 420000000 @ 41fffe000-420000000 [ 0.000000] RAMDISK: 37cd8000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000fa940 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000dffa0000 00044 (v01 062110 RSDT2249 20100621 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000dffa0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000dffa0450 07D9F (v01 AS368 AS368164 00000164 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dffb0000 00040 [ 0.000000] ACPI: APIC 00000000dffa0390 0007C (v01 062110 APIC2249 20100621 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000dffa0410 0003C (v01 062110 OEMMCFG 20100621 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000dffb0040 00072 (v01 062110 OEMB2249 20100621 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000dffaa450 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: AAFT 00000000dffaa560 00027 (v01 062110 OEMAAFT 20100621 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000dffaa590 00038 (v01 062110 OEMHPET 20100621 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000dffaa5d0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f600000-ffff88041d7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00420000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000dbf80 [ 0.000000] 0: 0x00100000 -> 0x00420000 [ 0.000000] On node 0 totalpages: 4177676 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 882616 pages, LIFO batch:31 [ 0.000000] Normal zone: 44800 pages used for memmap [ 0.000000] Normal zone: 3232000 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ff00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88041fc00000 s69248 r8192 d20864 u262144 [ 0.000000] pcpu-alloc: s69248 r8192 d20864 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4118538 [ 0.000000] Kernel command line: BOOT_IMAGE=/bzImage root=UUID=9162858d-df5e-43d6-8331-6d2b65082b4c ro panic=5 netconsole=6666@....168.2.1/eth0,5050@....168.2.87/00:16:cb:a7:dd:d1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ d21e000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ d0000000 [ 0.000000] Memory: 16310976k/17301504k available (4036k kernel code, 590800k absent, 399728k reserved, 2027k data, 468k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3213.157 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6426.31 BogoMIPS (lpj=32131570) [ 0.000064] pid_max: default: 32768 minimum: 301 [ 0.000126] Mount-cache hash table entries: 256 [ 0.000267] tseg: 0000000000 [ 0.000272] CPU: Physical Processor ID: 0 [ 0.000304] CPU: Processor Core ID: 0 [ 0.000334] mce: CPU supports 6 MCE banks [ 0.000420] Freeing SMP alternatives: 20k freed [ 0.000456] ACPI: Core revision 20110413 [ 0.012256] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.112297] CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00 [ 0.120000] Performance Events: AMD PMU driver. [ 0.120000] ... version: 0 [ 0.120000] ... bit width: 48 [ 0.120000] ... generic registers: 4 [ 0.120000] ... value mask: 0000ffffffffffff [ 0.120000] ... max period: 00007fffffffffff [ 0.120000] ... fixed-purpose events: 0 [ 0.120000] ... event mask: 000000000000000f [ 0.120000] Booting Node 0, Processors #1 [ 0.120000] smpboot cpu 1: start_ip = 9a000 [ 0.280028] #2 [ 0.280056] smpboot cpu 2: start_ip = 9a000 [ 0.450026] #3 [ 0.450054] smpboot cpu 3: start_ip = 9a000 [ 0.620025] #4 [ 0.620066] smpboot cpu 4: start_ip = 9a000 [ 0.790027] #5 Ok. [ 0.790057] smpboot cpu 5: start_ip = 9a000 [ 0.960003] Brought up 6 CPUs [ 0.960033] Total of 6 processors activated (38560.60 BogoMIPS). [ 0.963391] devtmpfs: initialized [ 0.963391] xor: automatically using best checksumming function: generic_sse [ 1.009895] generic_sse: 14408.400 MB/sec [ 1.009928] xor: using function: generic_sse (14408.400 MB/sec) [ 1.010040] NET: Registered protocol family 16 [ 1.010079] node 0 link 0: io port [1000, ffffff] [ 1.010079] TOM: 00000000e0000000 aka 3584M [ 1.010079] Fam 10h mmconf [e0000000, efffffff] [ 1.010079] node 0 link 0: mmio [a0000, bffff] [ 1.010079] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 1.010079] node 0 link 0: mmio [f0000000, fe1fffff] [ 1.010079] node 0 link 0: mmio [fe200000, fe3fffff] [ 1.010079] node 0 link 0: mmio [fe400000, ffefffff] [ 1.010079] TOM2: 0000000420000000 aka 16896M [ 1.010079] bus: [00, 07] on node 0 link 0 [ 1.010079] bus: 00 index 0 [io 0x0000-0xffff] [ 1.010080] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 1.010081] bus: 00 index 2 [mem 0xf0000000-0xffffffff] [ 1.010082] bus: 00 index 3 [mem 0x420000000-0xfcffffffff] [ 1.010089] Extended Config Space enabled on 1 nodes [ 1.010151] ACPI: bus type pci registered [ 1.010185] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.010185] PCI: not using MMCONFIG [ 1.010185] PCI: Using configuration type 1 for base access [ 1.010185] PCI: Using configuration type 1 for extended access [ 1.010185] bio: create slab <bio-0> at 0 [ 1.179907] raid6: int64x1 3168 MB/s [ 1.349907] raid6: int64x2 4039 MB/s [ 1.519903] raid6: int64x4 3205 MB/s [ 1.689900] raid6: int64x8 3017 MB/s [ 1.859895] raid6: sse2x1 4891 MB/s [ 2.029898] raid6: sse2x2 7971 MB/s [ 2.199900] raid6: sse2x4 9353 MB/s [ 2.199934] raid6: using algorithm sse2x4 (9353 MB/s) [ 2.200432] ACPI: EC: Look up EC in DSDT [ 2.200983] ACPI: Executed 4 blocks of module-level executable AML code [ 2.230239] ACPI: Interpreter enabled [ 2.230271] ACPI: (supports S0 S5) [ 2.230358] ACPI: Using IOAPIC for interrupt routing [ 2.230475] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 2.231052] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 2.245403] ACPI: No dock devices found. [ 2.245403] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.245403] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 2.245403] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 2.245403] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 2.245403] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 2.245403] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 2.245403] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 2.245403] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x000d0000-0x000dffff] conflicts with Adapter ROM [mem 0x000cf000-0x000d53ff] [ 2.245403] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600 [ 2.245403] pci 0000:00:01.0: [1849:9602] type 1 class 0x000604 [ 2.245403] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604 [ 2.245403] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 2.245403] pci 0000:00:02.0: PME# disabled [ 2.245403] pci 0000:00:03.0: [1022:960b] type 1 class 0x000604 [ 2.245403] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 2.245403] pci 0000:00:03.0: PME# disabled [ 2.245403] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604 [ 2.245403] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 2.245403] pci 0000:00:04.0: PME# disabled [ 2.245403] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604 [ 2.245403] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 2.245403] pci 0000:00:09.0: PME# disabled [ 2.245403] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604 [ 2.245403] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 2.245403] pci 0000:00:0a.0: PME# disabled [ 2.245403] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 2.245403] pci 0000:00:11.0: reg 10: [io 0x9000-0x9007] [ 2.245403] pci 0000:00:11.0: reg 14: [io 0x8000-0x8003] [ 2.245403] pci 0000:00:11.0: reg 18: [io 0x7000-0x7007] [ 2.245403] pci 0000:00:11.0: reg 1c: [io 0x6000-0x6003] [ 2.245403] pci 0000:00:11.0: reg 20: [io 0x5000-0x500f] [ 2.245403] pci 0000:00:11.0: reg 24: [mem 0xfe1ffc00-0xfe1fffff] [ 2.245403] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 2.245403] pci 0000:00:12.0: reg 10: [mem 0xfe1fe000-0xfe1fefff] [ 2.245403] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 2.245403] pci 0000:00:12.2: reg 10: [mem 0xfe1ff800-0xfe1ff8ff] [ 2.245403] pci 0000:00:12.2: supports D1 D2 [ 2.245403] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 2.245403] pci 0000:00:12.2: PME# disabled [ 2.245403] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 2.245403] pci 0000:00:13.0: reg 10: [mem 0xfe1fd000-0xfe1fdfff] [ 2.245403] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 2.245403] pci 0000:00:13.2: reg 10: [mem 0xfe1ff400-0xfe1ff4ff] [ 2.245403] pci 0000:00:13.2: supports D1 D2 [ 2.245403] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 2.245403] pci 0000:00:13.2: PME# disabled [ 2.245403] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 2.245403] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 2.245403] pci 0000:00:14.2: reg 10: [mem 0xfe1f8000-0xfe1fbfff 64bit] [ 2.245403] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 2.245403] pci 0000:00:14.2: PME# disabled [ 2.245403] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 2.245403] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 2.245403] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 2.245403] pci 0000:00:14.5: reg 10: [mem 0xfe1fc000-0xfe1fcfff] [ 2.245403] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 2.245403] pci 0000:00:16.0: reg 10: [mem 0xfe1f7000-0xfe1f7fff] [ 2.245403] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 2.245403] pci 0000:00:16.2: reg 10: [mem 0xfe1ff000-0xfe1ff0ff] [ 2.245403] pci 0000:00:16.2: supports D1 D2 [ 2.245403] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 2.245403] pci 0000:00:16.2: PME# disabled [ 2.245403] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 2.245403] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 2.245403] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 2.245403] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 2.250003] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 2.250040] pci 0000:01:05.0: [1002:9715] type 0 class 0x000300 [ 2.250046] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 2.250050] pci 0000:01:05.0: reg 14: [io 0xa000-0xa0ff] [ 2.250054] pci 0000:01:05.0: reg 18: [mem 0xfe3f0000-0xfe3fffff] [ 2.250061] pci 0000:01:05.0: reg 24: [mem 0xfe200000-0xfe2fffff] [ 2.250070] pci 0000:01:05.0: supports D1 D2 [ 2.250097] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 2.250129] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 2.250131] pci 0000:00:01.0: bridge window [mem 0xfe200000-0xfe3fffff] [ 2.250134] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 2.250158] pci 0000:04:00.0: [1000:0073] type 0 class 0x000104 [ 2.250165] pci 0000:04:00.0: reg 10: [io 0xc000-0xc0ff] [ 2.250172] pci 0000:04:00.0: reg 14: [mem 0xfe6fc000-0xfe6fffff 64bit] [ 2.250180] pci 0000:04:00.0: reg 1c: [mem 0xfe680000-0xfe6bffff 64bit] [ 2.250190] pci 0000:04:00.0: reg 30: [mem 0xfe6c0000-0xfe6dffff pref] [ 2.250204] pci 0000:04:00.0: supports D1 D2 [ 2.270016] pci 0000:00:02.0: PCI bridge to [bus 04-04] [ 2.270057] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 2.270059] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 2.270062] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 2.270088] pci 0000:05:00.0: [1000:0073] type 0 class 0x000104 [ 2.270096] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff] [ 2.270104] pci 0000:05:00.0: reg 14: [mem 0xfe7fc000-0xfe7fffff 64bit] [ 2.270112] pci 0000:05:00.0: reg 1c: [mem 0xfe780000-0xfe7bffff 64bit] [ 2.270121] pci 0000:05:00.0: reg 30: [mem 0xfe7c0000-0xfe7dffff pref] [ 2.270136] pci 0000:05:00.0: supports D1 D2 [ 2.290016] pci 0000:00:03.0: PCI bridge to [bus 05-05] [ 2.290054] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 2.290057] pci 0000:00:03.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 2.290060] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 2.290091] pci 0000:07:00.0: [11ab:7042] type 0 class 0x000100 [ 2.290104] pci 0000:07:00.0: reg 10: [mem 0xfe900000-0xfe9fffff 64bit] [ 2.290110] pci 0000:07:00.0: reg 18: [io 0xe800-0xe8ff] [ 2.290133] pci 0000:07:00.0: reg 30: [mem 0xfe800000-0xfe8fffff pref] [ 2.290161] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.290198] pci 0000:00:04.0: PCI bridge to [bus 07-07] [ 2.290230] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 2.290232] pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 2.290235] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 2.290264] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03 [ 2.290277] pci 0000:02:00.0: reg 10: [mem 0xfe4fe000-0xfe4fffff 64bit] [ 2.290327] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 2.290330] pci 0000:02:00.0: PME# disabled [ 2.310021] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 2.310056] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled) [ 2.310058] pci 0000:00:09.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 2.310061] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 2.310092] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 2.310104] pci 0000:03:00.0: reg 10: [io 0xb800-0xb8ff] [ 2.310122] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 2.310134] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 2.310142] pci 0000:03:00.0: reg 30: [mem 0xfe5e0000-0xfe5fffff pref] [ 2.310167] pci 0000:03:00.0: supports D1 D2 [ 2.310169] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.310172] pci 0000:03:00.0: PME# disabled [ 2.330022] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 2.330056] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] [ 2.330058] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 2.330061] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 2.330109] pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode) [ 2.330142] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 2.330145] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 2.330148] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 2.330150] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 2.330152] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 2.330153] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 2.330155] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 2.330168] pci_bus 0000:00: on NUMA node 0 [ 2.330171] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2.330251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 2.330268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 2.330283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT] [ 2.330296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 2.330310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 2.330324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 2.330343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 2.330382] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 2.330420] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 2.330453] ACPI _OSC control for PCIe not granted, disabling ASPM [ 2.330576] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0 [ 2.330576] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0 [ 2.330576] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0 [ 2.330763] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0 [ 2.331002] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0 [ 2.331234] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0 [ 2.331466] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0 [ 2.331698] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0 [ 2.331926] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 2.331926] vgaarb: loaded [ 2.331926] vgaarb: bridge control possible 0000:01:05.0 [ 2.331926] SCSI subsystem initialized [ 2.331926] libata version 3.00 loaded. [ 2.331926] PCI: Using ACPI for IRQ routing [ 2.341813] PCI: pci_cache_line_size set to 64 bytes [ 2.341867] reserve RAM buffer: 000000000009c400 - 000000000009ffff [ 2.341869] reserve RAM buffer: 00000000dbf80000 - 00000000dbffffff [ 2.341881] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.341881] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 2.342205] Switching to clocksource hpet [ 2.342293] pnp: PnP ACPI init [ 2.342293] ACPI: bus type pnp registered [ 2.342293] pnp 00:00: [bus 00-ff] [ 2.342293] pnp 00:00: [io 0x0cf8-0x0cff] [ 2.342293] pnp 00:00: [io 0x0000-0x0cf7 window] [ 2.342293] pnp 00:00: [io 0x0d00-0xffff window] [ 2.342293] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 2.342293] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 2.342293] pnp 00:00: [mem 0xe0000000-0xdfffffff window disabled] [ 2.342293] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 2.342293] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 2.342293] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 2.342293] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 2.342293] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.342293] pnp 00:02: [dma 4] [ 2.342293] pnp 00:02: [io 0x0000-0x000f] [ 2.342293] pnp 00:02: [io 0x0081-0x0083] [ 2.342293] pnp 00:02: [io 0x0087] [ 2.342293] pnp 00:02: [io 0x0089-0x008b] [ 2.342293] pnp 00:02: [io 0x008f] [ 2.342293] pnp 00:02: [io 0x00c0-0x00df] [ 2.342293] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.342293] pnp 00:03: [io 0x0070-0x0071] [ 2.342293] pnp 00:03: [irq 8] [ 2.342293] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.342293] pnp 00:04: [io 0x0061] [ 2.342293] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 2.342293] pnp 00:05: [io 0x00f0-0x00ff] [ 2.342293] pnp 00:05: [irq 13] [ 2.342293] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.342293] pnp 00:06: [io 0x02f8-0x02ff] [ 2.342293] pnp 00:06: [irq 3] [ 2.342293] pnp 00:06: [dma 0 disabled] [ 2.342293] pnp 00:06: Plug and Play ACPI device, IDs PNP0510 (active) [ 2.342293] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 2.342293] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.342293] pnp 00:08: [mem 0xfec00000-0xfec00fff] [ 2.342293] pnp 00:08: [mem 0xfee00000-0xfee00fff] [ 2.342293] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.342293] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 2.342293] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.342293] pnp 00:09: [io 0x0010-0x001f] [ 2.342293] pnp 00:09: [io 0x0022-0x003f] [ 2.342293] pnp 00:09: [io 0x0062-0x0063] [ 2.342293] pnp 00:09: [io 0x0065-0x006f] [ 2.342293] pnp 00:09: [io 0x0072-0x007f] [ 2.342293] pnp 00:09: [io 0x0080] [ 2.342293] pnp 00:09: [io 0x0084-0x0086] [ 2.342293] pnp 00:09: [io 0x0088] [ 2.342293] pnp 00:09: [io 0x008c-0x008e] [ 2.342293] pnp 00:09: [io 0x0090-0x009f] [ 2.342293] pnp 00:09: [io 0x00a2-0x00bf] [ 2.342293] pnp 00:09: [io 0x00b1] [ 2.342293] pnp 00:09: [io 0x00e0-0x00ef] [ 2.342293] pnp 00:09: [io 0x04d0-0x04d1] [ 2.342293] pnp 00:09: [io 0x040b] [ 2.342293] pnp 00:09: [io 0x04d6] [ 2.342293] pnp 00:09: [io 0x0c00-0x0c01] [ 2.342293] pnp 00:09: [io 0x0c14] [ 2.342293] pnp 00:09: [io 0x0c50-0x0c51] [ 2.342293] pnp 00:09: [io 0x0c52] [ 2.342293] pnp 00:09: [io 0x0c6c] [ 2.342293] pnp 00:09: [io 0x0c6f] [ 2.342293] pnp 00:09: [io 0x0cd0-0x0cd1] [ 2.342293] pnp 00:09: [io 0x0cd2-0x0cd3] [ 2.342293] pnp 00:09: [io 0x0cd4-0x0cd5] [ 2.342293] pnp 00:09: [io 0x0cd6-0x0cd7] [ 2.342293] pnp 00:09: [io 0x0cd8-0x0cdf] [ 2.342293] pnp 00:09: [io 0x0800-0x089f] [ 2.342293] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] [ 2.342293] pnp 00:09: [io 0x0b00-0x0b1f] [ 2.342293] pnp 00:09: [io 0x0b20-0x0b3f] [ 2.342293] pnp 00:09: [io 0x0900-0x090f] [ 2.342293] pnp 00:09: [io 0x0910-0x091f] [ 2.342293] pnp 00:09: [io 0xfe00-0xfefe] [ 2.342293] pnp 00:09: [io 0x0060-0x005f disabled] [ 2.342293] pnp 00:09: [io 0x0064-0x0063 disabled] [ 2.342293] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 2.342293] pnp 00:09: [mem 0xfec10000-0xfec1001f] [ 2.342293] pnp 00:09: [mem 0xfed80000-0xfed80fff] [ 2.342293] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled] [ 2.342293] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 2.342293] system 00:09: [io 0x040b] has been reserved [ 2.342293] system 00:09: [io 0x04d6] has been reserved [ 2.342293] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 2.342293] system 00:09: [io 0x0c14] has been reserved [ 2.342293] system 00:09: [io 0x0c50-0x0c51] has been reserved [ 2.342293] system 00:09: [io 0x0c52] has been reserved [ 2.342293] system 00:09: [io 0x0c6c] has been reserved [ 2.342293] system 00:09: [io 0x0c6f] has been reserved [ 2.342293] system 00:09: [io 0x0cd0-0x0cd1] has been reserved [ 2.342293] system 00:09: [io 0x0cd2-0x0cd3] has been reserved [ 2.342293] system 00:09: [io 0x0cd4-0x0cd5] has been reserved [ 2.342293] system 00:09: [io 0x0cd6-0x0cd7] has been reserved [ 2.342293] system 00:09: [io 0x0cd8-0x0cdf] has been reserved [ 2.342293] system 00:09: [io 0x0800-0x089f] has been reserved [ 2.342293] system 00:09: [io 0x0b00-0x0b1f] has been reserved [ 2.342293] system 00:09: [io 0x0b20-0x0b3f] has been reserved [ 2.342293] system 00:09: [io 0x0900-0x090f] has been reserved [ 2.342293] system 00:09: [io 0x0910-0x091f] has been reserved [ 2.342293] system 00:09: [io 0xfe00-0xfefe] has been reserved [ 2.342293] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved [ 2.342293] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved [ 2.342293] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved [ 2.342293] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.342293] pnp 00:0a: [io 0x0060] [ 2.342293] pnp 00:0a: [io 0x0064] [ 2.342293] pnp 00:0a: [irq 1] [ 2.342293] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 2.342293] pnp 00:0b: [io 0x03f8-0x03ff] [ 2.342293] pnp 00:0b: [irq 4] [ 2.342293] pnp 00:0b: [dma 0 disabled] [ 2.342293] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 2.342316] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled] [ 2.342317] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled] [ 2.342319] pnp 00:0c: [io 0x0290-0x029f] [ 2.342365] system 00:0c: [io 0x0290-0x029f] has been reserved [ 2.342396] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.342412] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 2.342457] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 2.342489] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.342549] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 2.342550] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 2.342551] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 2.342553] pnp 00:0e: [mem 0x00100000-0xdfffffff] [ 2.342554] pnp 00:0e: [mem 0xfec00000-0xffffffff] [ 2.342629] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.342660] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 2.342691] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 2.342723] system 00:0e: [mem 0x00100000-0xdfffffff] could not be reserved [ 2.342754] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved [ 2.342785] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.342835] pnp: PnP ACPI: found 15 devices [ 2.342865] ACPI: ACPI bus type pnp unregistered [ 2.345616] Switched to NOHz mode on CPU #0 [ 2.345673] Switched to NOHz mode on CPU #3 [ 2.345731] Switched to NOHz mode on CPU #1 [ 2.345734] Switched to NOHz mode on CPU #2 [ 2.345746] Switched to NOHz mode on CPU #4 [ 2.345749] Switched to NOHz mode on CPU #5 [ 2.349869] PCI: max bus depth: 1 pci_try_num: 2 [ 2.349888] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 2.349919] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 2.349951] pci 0000:00:01.0: bridge window [mem 0xfe200000-0xfe3fffff] [ 2.349982] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 2.350059] pci 0000:00:02.0: PCI bridge to [bus 04-04] [ 2.350090] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 2.350122] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 2.350153] pci 0000:00:02.0: bridge window [mem pref disabled] [ 2.350185] pci 0000:00:03.0: PCI bridge to [bus 05-05] [ 2.350216] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 2.350249] pci 0000:00:03.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 2.350280] pci 0000:00:03.0: bridge window [mem pref disabled] [ 2.350312] pci 0000:00:04.0: PCI bridge to [bus 07-07] [ 2.350343] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 2.350375] pci 0000:00:04.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 2.350411] pci 0000:00:04.0: bridge window [mem pref disabled] [ 2.350443] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 2.350473] pci 0000:00:09.0: bridge window [io disabled] [ 2.350504] pci 0000:00:09.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 2.350535] pci 0000:00:09.0: bridge window [mem pref disabled] [ 2.350567] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 2.350598] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] [ 2.350629] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] [ 2.350661] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 2.350694] pci 0000:00:14.4: PCI bridge to [bus 06-06] [ 2.350724] pci 0000:00:14.4: bridge window [io disabled] [ 2.350757] pci 0000:00:14.4: bridge window [mem disabled] [ 2.350789] pci 0000:00:14.4: bridge window [mem pref disabled] [ 2.350829] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.350861] pci 0000:00:02.0: setting latency timer to 64 [ 2.350865] pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.350897] pci 0000:00:03.0: setting latency timer to 64 [ 2.350901] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.350932] pci 0000:00:04.0: setting latency timer to 64 [ 2.350936] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.350967] pci 0000:00:09.0: setting latency timer to 64 [ 2.350970] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.351001] pci 0000:00:0a.0: setting latency timer to 64 [ 2.351006] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.351007] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.351009] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.351010] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfebfffff] [ 2.351012] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 2.351013] pci_bus 0000:01: resource 1 [mem 0xfe200000-0xfe3fffff] [ 2.351014] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 2.351016] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 2.351017] pci_bus 0000:04: resource 1 [mem 0xfe600000-0xfe6fffff] [ 2.351019] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 2.351020] pci_bus 0000:05: resource 1 [mem 0xfe700000-0xfe7fffff] [ 2.351021] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 2.351023] pci_bus 0000:07: resource 1 [mem 0xfe800000-0xfe9fffff] [ 2.351024] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff] [ 2.351025] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 2.351027] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff] [ 2.351028] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 2.351030] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] [ 2.351031] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] [ 2.351032] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] [ 2.351034] pci_bus 0000:06: resource 7 [mem 0xf0000000-0xfebfffff] [ 2.351057] NET: Registered protocol family 2 [ 2.351135] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 2.352087] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 2.353248] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.353567] TCP: Hash tables configured (established 262144 bind 65536) [ 2.353601] TCP reno registered [ 2.353632] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 2.353743] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 2.353926] NET: Registered protocol family 1 [ 2.354056] RPC: Registered named UNIX socket transport module. [ 2.354087] RPC: Registered udp transport module. [ 2.354117] RPC: Registered tcp transport module. [ 2.354147] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.354182] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 2.500089] pci 0000:01:05.0: Boot video device [ 2.500118] PCI: CLS 64 bytes, default 64 [ 2.500152] Unpacking initramfs... [ 2.539130] Freeing initrd memory: 3168k freed [ 2.539863] PCI-DMA: Disabling AGP. [ 2.540036] PCI-DMA: aperture base @ d0000000 size 65536 KB [ 2.540067] PCI-DMA: using GART IOMMU. [ 2.540098] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 2.574189] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.636100] Installing knfsd (copyright (C) 1996 okir@...ad.swb.de). [ 2.636310] msgmni has been set to 31992 [ 2.636457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 2.636490] io scheduler noop registered [ 2.636519] io scheduler deadline registered [ 2.636606] io scheduler cfq registered (default) [ 2.636711] pcieport 0000:00:02.0: setting latency timer to 64 [ 2.636730] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 2.636781] pcieport 0000:00:03.0: setting latency timer to 64 [ 2.636795] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X [ 2.636839] pcieport 0000:00:04.0: setting latency timer to 64 [ 2.636854] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X [ 2.636898] pcieport 0000:00:09.0: setting latency timer to 64 [ 2.636912] pcieport 0000:00:09.0: irq 43 for MSI/MSI-X [ 2.636956] pcieport 0000:00:0a.0: setting latency timer to 64 [ 2.636971] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X [ 2.637246] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.637280] ACPI: Power Button [PWRB] [ 2.637353] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.637386] ACPI: Power Button [PWRF] [ 2.637446] ACPI: acpi_idle registered with cpuidle [ 2.658560] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.679110] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.699710] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.720581] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.720829] Real Time Clock Driver v1.12b [ 2.721594] loop: module loaded [ 2.721752] tun: Universal TUN/TAP device driver, 1.6 [ 2.721782] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com> [ 2.721866] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.721909] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.721993] r8169 0000:03:00.0: setting latency timer to 64 [ 2.722028] r8169 0000:03:00.0: irq 45 for MSI/MSI-X [ 2.722217] r8169 0000:03:00.0: eth0: RTL8168e/8111e at 0xffffc9000000e000, 00:25:22:55:3e:2d, XID 0c100000 IRQ 45 [ 2.722289] netconsole: local port 6666 [ 2.722332] netconsole: local IP 192.168.2.1 [ 2.722361] netconsole: interface 'eth0' [ 2.722391] netconsole: remote port 5050 [ 2.722420] netconsole: remote IP 192.168.2.87 [ 2.722451] netconsole: remote ethernet address 00:16:cb:a7:dd:d1 [ 2.722482] netconsole: device eth0 not up yet, forcing it [ 3.540028] Refined TSC clocksource calibration: 3213.418 MHz. [ 3.540067] Switching to clocksource tsc [ 63.200106] r8169 0000:03:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-1.fw (-2) [ 63.223480] r8169 0000:03:00.0: eth0: link down [ 63.223523] r8169 0000:03:00.0: eth0: link down [ 65.179915] r8169 0000:03:00.0: eth0: link up [ 65.182530] console [netcon0] enabled [ 65.182562] netconsole: network logging started [ 65.182738] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 65.182771] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 65.183304] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 65.183474] mousedev: PS/2 mouse device common for all mice [ 65.183532] i2c /dev entries driver [ 65.183588] md: linear personality registered for level -1 [ 65.183619] md: raid0 personality registered for level 0 [ 65.183651] md: raid1 personality registered for level 1 [ 65.183683] md: raid10 personality registered for level 10 [ 65.183714] md: raid6 personality registered for level 6 [ 65.183746] md: raid5 personality registered for level 5 [ 65.183779] md: raid4 personality registered for level 4 [ 65.183968] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@...hat.com [ 65.184375] cpuidle: using governor ladder [ 65.185144] cpuidle: using governor menu [ 65.185339] TCP cubic registered [ 65.185377] NET: Registered protocol family 17 [ 65.185431] Bridge firewalling registered [ 65.185468] 802.1Q VLAN Support v1.8 [ 65.185502] Registering the dns_resolver key type [ 65.185730] registered taskstats version 1 [ 65.216255] Freeing unused kernel memory: 468k freed [ 65.226393] udev[1318]: starting version 164 [ 65.237596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 65.243627] megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011 [ 65.243694] megasas: 0x1000:0x0073:0x1014:0x03b1: bus 4:slot 0:func 0 [ 65.243765] megaraid_sas 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 65.243803] megaraid_sas 0000:04:00.0: setting latency timer to 64 [ 65.244850] megasas: FW now in Ready state [ 65.245232] megaraid_sas 0000:04:00.0: irq 46 for MSI/MSI-X [ 65.246538] sata_mv 0000:07:00.0: version 1.28 [ 65.246610] sata_mv 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 65.246785] sata_mv 0000:07:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx [ 65.246825] sata_mv 0000:07:00.0: setting latency timer to 64 [ 65.247046] ahci 0000:00:11.0: version 3.0 [ 65.247063] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 65.247146] ahci 0000:00:11.0: irq 47 for MSI/MSI-X [ 65.247256] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 65.247293] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 65.247385] usbcore: registered new interface driver usbfs [ 65.247443] usbcore: registered new interface driver hub [ 65.248070] scsi1 : sata_mv [ 65.248189] usbcore: registered new device driver usb [ 65.248450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 65.248497] scsi3 : sata_mv [ 65.248728] scsi2 : ahci [ 65.249183] scsi4 : sata_mv [ 65.249270] scsi6 : sata_mv [ 65.249318] ata1: SATA max UDMA/133 mmio m1048576@...e900000 port 0xfe922000 irq 16 [ 65.249354] ata2: SATA max UDMA/133 mmio m1048576@...e900000 port 0xfe924000 irq 16 [ 65.249390] ata3: SATA max UDMA/133 mmio m1048576@...e900000 port 0xfe926000 irq 16 [ 65.249425] ata4: SATA max UDMA/133 mmio m1048576@...e900000 port 0xfe928000 irq 16 [ 65.249981] scsi5 : ahci [ 65.250068] scsi7 : ahci [ 65.250436] scsi8 : ahci [ 65.250534] scsi9 : ahci [ 65.250685] scsi10 : ahci [ 65.250746] ata5: SATA max UDMA/133 abar m1024@...e1ffc00 port 0xfe1ffd00 irq 47 [ 65.250783] ata6: SATA max UDMA/133 abar m1024@...e1ffc00 port 0xfe1ffd80 irq 47 [ 65.250820] ata7: SATA max UDMA/133 abar m1024@...e1ffc00 port 0xfe1ffe00 irq 47 [ 65.250857] ata8: SATA max UDMA/133 abar m1024@...e1ffc00 port 0xfe1ffe80 irq 47 [ 65.250895] ata9: SATA max UDMA/133 abar m1024@...e1ffc00 port 0xfe1fff00 irq 47 [ 65.250933] ata10: SATA max UDMA/133 abar m1024@...e1ffc00 port 0xfe1fff80 irq 47 [ 65.250996] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 65.251056] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 65.251101] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 65.251148] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 65.251199] QUIRK: Enable AMD PLL fix [ 65.251208] ehci_hcd 0000:00:12.2: debug port 1 [ 65.251257] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe1ff800 [ 65.270037] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 65.270214] hub 1-0:1.0: USB hub found [ 65.270254] hub 1-0:1.0: 5 ports detected [ 65.270351] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 65.270404] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 65.270454] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 65.270496] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 65.270551] ehci_hcd 0000:00:13.2: debug port 1 [ 65.270595] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe1ff400 [ 65.270605] megasas_init_mfi: fw_support_ieee=67108864 [ 65.270606] megasas: INIT adapter done [ 65.290144] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 65.290258] hub 2-0:1.0: USB hub found [ 65.290292] hub 2-0:1.0: 5 ports detected [ 65.290362] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 65.290407] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 65.290440] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 65.290478] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 65.290533] ehci_hcd 0000:00:16.2: debug port 1 [ 65.290573] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe1ff000 [ 65.320044] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 65.320151] hub 3-0:1.0: USB hub found [ 65.320184] hub 3-0:1.0: 4 ports detected [ 65.348414] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 65.348479] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 65.348539] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 65.348574] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 65.348629] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe1fe000 [ 65.390058] scsi0 : LSI SAS based MegaRAID driver [ 65.402010] scsi 0:0:10:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 [ 65.402165] sd 0:0:10:0: Attached scsi generic sg0 type 0 [ 65.404137] hub 4-0:1.0: USB hub found [ 65.404173] hub 4-0:1.0: 5 ports detected [ 65.404224] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 65.404265] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 65.404298] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 65.404342] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe1fd000 [ 65.408855] sd 0:0:10:0: [sda] physical block alignment offset: 4096 [ 65.408893] sd 0:0:10:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 65.408928] sd 0:0:10:0: [sda] 4096-byte physical blocks [ 65.410683] scsi 0:0:11:0: Direct-Access ATA WDC WD20EARS-00M AB51 PQ: 0 ANSI: 5 [ 65.410807] sd 0:0:11:0: Attached scsi generic sg1 type 0 [ 65.415759] sd 0:0:11:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 65.423407] scsi 0:0:12:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 [ 65.423536] sd 0:0:12:0: Attached scsi generic sg2 type 0 [ 65.430537] sd 0:0:12:0: [sdc] physical block alignment offset: 4096 [ 65.430574] sd 0:0:12:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 65.430608] sd 0:0:12:0: [sdc] 4096-byte physical blocks [ 65.437120] sd 0:0:11:0: [sdb] Write Protect is off [ 65.437156] sd 0:0:11:0: [sdb] Mode Sense: 73 00 00 08 [ 65.437730] sd 0:0:10:0: [sda] Write Protect is off [ 65.437766] sd 0:0:10:0: [sda] Mode Sense: 73 00 00 08 [ 65.441716] scsi 0:0:13:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 [ 65.441835] sd 0:0:13:0: Attached scsi generic sg3 type 0 [ 65.444683] sd 0:0:11:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.445330] scsi 0:0:18:0: Direct-Access SEAGATE ST3300655SS S515 PQ: 0 ANSI: 5 [ 65.445467] sd 0:0:18:0: Attached scsi generic sg4 type 0 [ 65.451625] sd 0:0:10:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.451711] sd 0:0:13:0: [sdd] physical block alignment offset: 4096 [ 65.451747] sd 0:0:13:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 65.451790] sd 0:0:13:0: [sdd] 4096-byte physical blocks [ 65.452285] sd 0:0:18:0: [sde] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 65.453321] scsi 0:0:19:0: Direct-Access SEAGATE ST3300655SS A005 PQ: 0 ANSI: 5 [ 65.453456] sd 0:0:19:0: Attached scsi generic sg5 type 0 [ 65.458128] sd 0:0:18:0: [sde] Write Protect is off [ 65.458163] sd 0:0:18:0: [sde] Mode Sense: b3 00 10 08 [ 65.459325] sd 0:0:19:0: [sdf] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 65.459448] scsi 0:0:20:0: Direct-Access SEAGATE ST3300655SS A005 PQ: 0 ANSI: 5 [ 65.459583] sd 0:0:20:0: Attached scsi generic sg6 type 0 [ 65.464128] hub 5-0:1.0: USB hub found [ 65.464165] hub 5-0:1.0: 5 ports detected [ 65.464214] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 65.464255] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 65.464288] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 65.464331] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe1fc000 [ 65.464611] sd 0:0:18:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 65.465337] sd 0:0:20:0: [sdg] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 65.465748] scsi 0:0:21:0: Direct-Access SEAGATE ST3300655SS S515 PQ: 0 ANSI: 5 [ 65.465906] sd 0:0:21:0: Attached scsi generic sg7 type 0 [ 65.470327] sd 0:0:19:0: [sdf] Write Protect is off [ 65.470362] sd 0:0:19:0: [sdf] Mode Sense: b3 00 10 08 [ 65.476731] sd 0:0:21:0: [sdh] 585937500 512-byte logical blocks: (300 GB/279 GiB) [ 65.476846] sd 0:0:20:0: [sdg] Write Protect is off [ 65.476892] sd 0:0:20:0: [sdg] Mode Sense: b3 00 10 08 [ 65.476916] sd 0:0:19:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 65.482548] sd 0:0:21:0: [sdh] Write Protect is off [ 65.482586] sd 0:0:21:0: [sdh] Mode Sense: b3 00 10 08 [ 65.483436] sd 0:0:20:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 65.488248] sd 0:0:21:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 65.494395] sde: unknown partition table [ 65.501262] sdb: unknown partition table [ 65.503732] sd 0:0:12:0: [sdc] Write Protect is off [ 65.503776] sd 0:0:12:0: [sdc] Mode Sense: 73 00 00 08 [ 65.505389] sdf: unknown partition table [ 65.506463] sd 0:0:18:0: [sde] Attached SCSI disk [ 65.511538] sdh: unknown partition table [ 65.512582] sda: unknown partition table [ 65.519104] sd 0:0:12:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.521490] sdg: unknown partition table [ 65.524125] hub 6-0:1.0: USB hub found [ 65.524162] hub 6-0:1.0: 2 ports detected [ 65.524211] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 65.524252] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 65.524285] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 65.524332] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe1f7000 [ 65.526953] sd 0:0:19:0: [sdf] Attached SCSI disk [ 65.529657] sd 0:0:21:0: [sdh] Attached SCSI disk [ 65.531531] sd 0:0:13:0: [sdd] Write Protect is off [ 65.531569] sd 0:0:13:0: [sdd] Mode Sense: 73 00 00 08 [ 65.532606] sd 0:0:20:0: [sdg] Attached SCSI disk [ 65.537818] megasas: 0x1000:0x0073:0x1014:0x03b1: bus 5:slot 0:func 0 [ 65.537887] megaraid_sas 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 65.537923] megaraid_sas 0000:05:00.0: setting latency timer to 64 [ 65.537974] megasas: FW now in Ready state [ 65.538034] megaraid_sas 0000:05:00.0: irq 48 for MSI/MSI-X [ 65.543918] sd 0:0:13:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.545106] sd 0:0:11:0: [sdb] Attached SCSI disk [ 65.560038] megasas_init_mfi: fw_support_ieee=67108864 [ 65.560079] megasas: INIT adapter done [ 65.563406] sd 0:0:10:0: [sda] Attached SCSI disk [ 65.570045] sdc: unknown partition table [ 65.584124] hub 7-0:1.0: USB hub found [ 65.584161] hub 7-0:1.0: 4 ports detected [ 65.593514] sdd: unknown partition table [ 65.600047] ata9: SATA link down (SStatus 0 SControl 300) [ 65.600107] ata7: SATA link down (SStatus 0 SControl 300) [ 65.600170] ata8: SATA link down (SStatus 0 SControl 300) [ 65.600261] ata10: SATA link down (SStatus 0 SControl 300) [ 65.623341] sd 0:0:12:0: [sdc] Attached SCSI disk [ 65.642020] sd 0:0:13:0: [sdd] Attached SCSI disk [ 65.650037] scsi11 : LSI SAS based MegaRAID driver [ 65.661988] scsi 11:0:9:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 [ 65.662113] sd 11:0:9:0: Attached scsi generic sg8 type 0 [ 65.668949] sd 11:0:9:0: [sdi] physical block alignment offset: 4096 [ 65.668986] sd 11:0:9:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 65.669020] sd 11:0:9:0: [sdi] 4096-byte physical blocks [ 65.675059] scsi 11:0:10:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 [ 65.675182] sd 11:0:10:0: Attached scsi generic sg9 type 0 [ 65.681812] sd 11:0:10:0: [sdj] physical block alignment offset: 4096 [ 65.681849] sd 11:0:10:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 65.681884] sd 11:0:10:0: [sdj] 4096-byte physical blocks [ 65.698957] sd 11:0:9:0: [sdi] Write Protect is off [ 65.698993] sd 11:0:9:0: [sdi] Mode Sense: 73 00 00 08 [ 65.709639] scsi 11:0:13:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 [ 65.709759] sd 11:0:13:0: Attached scsi generic sg10 type 0 [ 65.711168] sd 11:0:9:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.716961] sd 11:0:13:0: [sdk] physical block alignment offset: 4096 [ 65.716998] sd 11:0:13:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 65.717035] sd 11:0:13:0: [sdk] 4096-byte physical blocks [ 65.742927] scsi 11:0:14:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 [ 65.743040] sd 11:0:14:0: Attached scsi generic sg11 type 0 [ 65.747118] sd 11:0:13:0: [sdk] Write Protect is off [ 65.747153] sd 11:0:13:0: [sdk] Mode Sense: 73 00 00 08 [ 65.749113] sd 11:0:14:0: [sdl] physical block alignment offset: 4096 [ 65.749150] sd 11:0:14:0: [sdl] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 65.749184] sd 11:0:14:0: [sdl] 4096-byte physical blocks [ 65.749947] sd 11:0:10:0: [sdj] Write Protect is off [ 65.749982] sd 11:0:10:0: [sdj] Mode Sense: 73 00 00 08 [ 65.750068] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 65.759269] sd 11:0:13:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.759275] sdi: unknown partition table [ 65.761631] sd 11:0:10:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.777351] sd 11:0:14:0: [sdl] Write Protect is off [ 65.777386] sd 11:0:14:0: [sdl] Mode Sense: 73 00 00 08 [ 65.787708] sd 11:0:14:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.790285] ata1.00: ATA-8: FM-25S2S-60GBP2, 2.1, max UDMA/133 [ 65.790321] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 65.800049] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 65.800102] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 65.803492] scsi 11:0:15:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 [ 65.803611] sd 11:0:15:0: Attached scsi generic sg12 type 0 [ 65.807891] sd 11:0:9:0: [sdi] Attached SCSI disk [ 65.808134] sdj: unknown partition table [ 65.808954] ata5.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 [ 65.808989] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 65.809689] sdk: unknown partition table [ 65.810820] sd 11:0:15:0: [sdm] physical block alignment offset: 4096 [ 65.810865] sd 11:0:15:0: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 65.810902] sd 11:0:15:0: [sdm] 4096-byte physical blocks [ 65.811042] ata5.00: configured for UDMA/133 [ 65.812159] ata6.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133 [ 65.812194] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 65.814325] ata6.00: configured for UDMA/133 [ 65.833497] sdl: unknown partition table [ 65.841554] sd 11:0:15:0: [sdm] Write Protect is off [ 65.841590] sd 11:0:15:0: [sdm] Mode Sense: 73 00 00 08 [ 65.850283] ata1.00: configured for UDMA/133 [ 65.850387] scsi 1:0:0:0: Direct-Access ATA FM-25S2S-60GBP2 2.1 PQ: 0 ANSI: 5 [ 65.850502] sd 1:0:0:0: Attached scsi generic sg13 type 0 [ 65.850529] sd 1:0:0:0: [sdn] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 65.850653] sd 1:0:0:0: [sdn] Write Protect is off [ 65.850687] sd 1:0:0:0: [sdn] Mode Sense: 00 3a 00 00 [ 65.850712] sd 1:0:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.851123] sdn: unknown partition table [ 65.851320] sd 1:0:0:0: [sdn] Attached SCSI disk [ 65.853501] sd 11:0:15:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.853583] sd 11:0:10:0: [sdj] Attached SCSI disk [ 65.860607] sd 11:0:13:0: [sdk] Attached SCSI disk [ 65.876691] sd 11:0:14:0: [sdl] Attached SCSI disk [ 65.890059] usb 4-2: new full speed USB device number 2 using ohci_hcd [ 65.902817] sdm: unknown partition table [ 65.921026] scsi 11:0:16:0: Direct-Access ATA WDC WD20EARS-60M AB51 PQ: 0 ANSI: 5 [ 65.921149] sd 11:0:16:0: Attached scsi generic sg14 type 0 [ 65.928106] sd 11:0:16:0: [sdo] physical block alignment offset: 4096 [ 65.928143] sd 11:0:16:0: [sdo] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 65.928177] sd 11:0:16:0: [sdo] 4096-byte physical blocks [ 65.953117] sd 11:0:15:0: [sdm] Attached SCSI disk [ 66.030173] sd 11:0:16:0: [sdo] Write Protect is off [ 66.030211] sd 11:0:16:0: [sdo] Mode Sense: 73 00 00 08 [ 66.043679] sd 11:0:16:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 66.092356] sdo: unknown partition table [ 66.182327] sd 11:0:16:0: [sdo] Attached SCSI disk [ 66.200059] ata2: SATA link down (SStatus 0 SControl 300) [ 66.550061] ata3: SATA link down (SStatus 0 SControl 300) [ 66.900053] ata4: SATA link down (SStatus 0 SControl 300) [ 66.900198] scsi 2:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 66.900325] sd 2:0:0:0: [sdp] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 66.900327] sd 2:0:0:0: Attached scsi generic sg15 type 0 [ 66.900427] scsi 5:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5 [ 66.900464] sd 2:0:0:0: [sdp] Write Protect is off [ 66.900467] sd 2:0:0:0: [sdp] Mode Sense: 00 3a 00 00 [ 66.900491] sd 2:0:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 66.900643] sd 5:0:0:0: [sdq] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 66.900645] sd 5:0:0:0: Attached scsi generic sg16 type 0 [ 66.900773] sd 5:0:0:0: [sdq] Write Protect is off [ 66.900808] sd 5:0:0:0: [sdq] Mode Sense: 00 3a 00 00 [ 66.900829] sd 5:0:0:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 66.904434] sdq: sdq1 sdq2 [ 66.904681] sd 5:0:0:0: [sdq] Attached SCSI disk [ 66.909577] sdp: sdp1 sdp2 [ 66.909810] sd 2:0:0:0: [sdp] Attached SCSI disk [ 67.191179] md: md1 stopped. [ 67.191764] md: bind<sdq1> [ 67.191895] md: bind<sdp1> [ 67.192591] bio: create slab <bio-1> at 1 [ 67.192670] md/raid1:md1: active with 2 out of 2 mirrors [ 67.192714] md1: detected capacity change from 0 to 524222464 [ 67.200588] md1: unknown partition table [ 67.207511] md: md2 stopped. [ 67.208237] md: bind<sdq2> [ 67.209779] md: bind<sdp2> [ 67.210543] md/raid10:md2: active with 2 out of 2 devices [ 67.210673] created bitmap (8 pages) for device md2 [ 67.210934] md2: bitmap initialized from disk: read 1/1 pages, set 2 of 14897 bits [ 67.219474] md2: detected capacity change from 0 to 999677755392 [ 67.224116] md2: p1 p2 p3 [ 67.230750] md: md10 stopped. [ 67.244399] md: bind<sde> [ 67.244619] md: bind<sdf> [ 67.244823] md: bind<sdg> [ 67.248205] md: bind<sdh> [ 67.248955] md/raid10:md10: active with 4 out of 4 devices [ 67.252191] created bitmap (5 pages) for device md10 [ 67.252505] md10: bitmap initialized from disk: read 1/1 pages, set 0 of 8941 bits [ 67.264422] md10: detected capacity change from 0 to 599997284352 [ 67.271735] md10: unknown partition table [ 67.296795] md: md0 stopped. [ 67.398685] md: bind<sdd> [ 67.404514] md: bind<sdm> [ 67.404703] md: bind<sdb> [ 67.408534] md: bind<sdj> [ 67.411132] md: bind<sdi> [ 67.411724] md: bind<sdl> [ 67.430316] md: bind<sda> [ 67.430607] md: bind<sdc> [ 67.430770] md: bind<sdk> [ 67.430922] md: bind<sdo> [ 67.431657] md/raid:md0: device sdo operational as raid disk 0 [ 67.431694] md/raid:md0: device sdk operational as raid disk 9 [ 67.431726] md/raid:md0: device sdc operational as raid disk 8 [ 67.431758] md/raid:md0: device sda operational as raid disk 7 [ 67.431793] md/raid:md0: device sdl operational as raid disk 6 [ 67.431824] md/raid:md0: device sdi operational as raid disk 5 [ 67.431856] md/raid:md0: device sdj operational as raid disk 4 [ 67.431891] md/raid:md0: device sdb operational as raid disk 3 [ 67.431925] md/raid:md0: device sdm operational as raid disk 2 [ 67.431956] md/raid:md0: device sdd operational as raid disk 1 [ 67.432356] md/raid:md0: allocated 10572kB [ 67.432418] md/raid:md0: raid level 6 active with 10 out of 10 devices, algorithm 2 [ 67.432457] RAID conf printout: [ 67.432458] --- level:6 rd:10 wd:10 [ 67.432459] disk 0, o:1, dev:sdo [ 67.432461] disk 1, o:1, dev:sdd [ 67.432462] disk 2, o:1, dev:sdm [ 67.432463] disk 3, o:1, dev:sdb [ 67.432463] disk 4, o:1, dev:sdj [ 67.432464] disk 5, o:1, dev:sdi [ 67.432465] disk 6, o:1, dev:sdl [ 67.432466] disk 7, o:1, dev:sda [ 67.432467] disk 8, o:1, dev:sdc [ 67.432468] disk 9, o:1, dev:sdk [ 67.466604] created bitmap (15 pages) for device md0 [ 67.466953] md0: bitmap initialized from disk: read 1/1 pages, set 0 of 29809 bits [ 67.472708] md0: detected capacity change from 0 to 16003181314048 [ 67.511792] md0: unknown partition table [ 67.680098] EXT4-fs (md2p1): INFO: recovery required on readonly filesystem [ 67.680135] EXT4-fs (md2p1): write access will be enabled during recovery [ 69.810256] EXT4-fs (md2p1): recovery complete [ 69.810604] EXT4-fs (md2p1): mounted filesystem with ordered data mode. Opts: (null) [ 70.548329] udev[1803]: starting version 164 [ 70.676012] usbcore: registered new interface driver usbserial [ 70.676059] USB Serial support registered for generic [ 70.676103] usbcore: registered new interface driver usbserial_generic [ 70.676147] usbserial: USB Serial Driver core [ 70.683832] USB Serial support registered for pl2303 [ 70.683881] pl2303 4-2:1.0: pl2303 converter detected [ 70.698118] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 70.701760] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 70.701834] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 70.701837] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 70.701877] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 70.702046] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfe4fe000 [ 70.702134] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X [ 70.702138] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X [ 70.702140] xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X [ 70.702142] xhci_hcd 0000:02:00.0: irq 52 for MSI/MSI-X [ 70.702144] xhci_hcd 0000:02:00.0: irq 53 for MSI/MSI-X [ 70.702146] xhci_hcd 0000:02:00.0: irq 54 for MSI/MSI-X [ 70.702148] xhci_hcd 0000:02:00.0: irq 55 for MSI/MSI-X [ 70.702325] xHCI xhci_add_endpoint called for root hub [ 70.702327] xHCI xhci_check_bandwidth called for root hub [ 70.702347] hub 8-0:1.0: USB hub found [ 70.702384] hub 8-0:1.0: 2 ports detected [ 70.702526] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 70.702567] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 70.704246] usb 4-2: pl2303 converter now attached to ttyUSB0 [ 70.704320] usbcore: registered new interface driver pl2303 [ 70.704367] pl2303: Prolific PL2303 USB to serial adaptor driver [ 70.705493] xHCI xhci_add_endpoint called for root hub [ 70.705495] xHCI xhci_check_bandwidth called for root hub [ 70.705526] hub 9-0:1.0: USB hub found [ 70.705569] hub 9-0:1.0: 2 ports detected [ 71.350688] EXT4-fs (md2p1): re-mounted. Opts: (null) [ 71.586339] EXT4-fs (md2p1): re-mounted. Opts: errors=remount-ro,commit=30 [ 71.688584] kvm: Nested Virtualization enabled [ 71.688624] kvm: Nested Paging enabled [ 71.715947] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor (6 cpu cores) (version 2.20.00) [ 71.715994] powernow-k8: Core Performance Boosting: on. [ 71.716050] powernow-k8: 0 : pstate 0 (3200 MHz) [ 71.716081] powernow-k8: 1 : pstate 1 (2400 MHz) [ 71.716112] powernow-k8: 2 : pstate 2 (1600 MHz) [ 71.716144] powernow-k8: 3 : pstate 3 (800 MHz) [ 71.741872] w83627ehf: Found NCT6775F chip at 0x290 [ 113.081227] fuse init (API version 7.16) [ 113.463322] EXT4-fs (md2p3): mounted filesystem with ordered data mode. Opts: commit=30 [ 113.523249] EXT4-fs (md2p2): mounted filesystem with ordered data mode. Opts: commit=30 [ 113.603188] EXT4-fs (md10): mounted filesystem with ordered data mode. Opts: commit=30 [ 114.034563] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: commit=30,acl [ 116.104972] Adding 20971516k swap on /raid10/SWAP/srv.swap. Priority:-1 extents:13 across:22421500k [ 116.578585] NET: Registered protocol family 15 [ 138.220721] device br1_dummy entered promiscuous mode [ 180.833074] u32 classifier [ 180.833129] Actions configured [ 191.222339] PPP generic driver version 2.4.2 [ 192.068503] NET: Registered protocol family 24 [ 192.759974] ip_tables: (C) 2000-2006 Netfilter Core Team [ 192.772071] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 193.055922] HTB: quantum of class 10040 is small. Consider r2q change. [ 204.360085] sshd (3856): /proc/3856/oom_adj is deprecated, please use /proc/3856/oom_score_adj instead. [ 212.869525] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 212.875925] NFSD: starting 90-second grace period brad@srv:~$ lsmod Module Size Used by nfs 294438 1 xt_length 1200 2 xt_CLASSIFY 1075 5 sch_sfq 6676 2 xt_CHECKSUM 1213 2 iptable_mangle 1471 1 xt_TCPMSS 2551 2 ipt_REJECT 2229 1 ipt_MASQUERADE 1743 10 ipt_REDIRECT 1117 1 xt_recent 8207 2 xt_state 1210 6 xt_tcpudp 2451 28 iptable_filter 1426 1 iptable_nat 3977 1 nf_nat 16789 3 ipt_MASQUERADE,ipt_REDIRECT,iptable_nat nf_conntrack_ipv4 11852 9 iptable_nat,nf_nat nf_conntrack 60821 5 ipt_MASQUERADE,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1401 1 nf_conntrack_ipv4 ip_tables 16538 3 iptable_mangle,iptable_filter,iptable_nat x_tables 20342 14 xt_length,xt_CLASSIFY,xt_CHECKSUM,iptable_mangle,xt_TCPMSS,ipt_REJECT,ipt_MASQUERADE,ipt_REDIRECT,xt_recent,xt_state,xt_tcpudp,iptable_filter,iptable_nat,ip_tables pppoe 9558 2 pppox 2156 1 pppoe ppp_generic 24227 6 pppoe,pppox slhc 5277 1 ppp_generic cls_u32 6356 6 sch_htb 14352 2 deflate 1921 0 zlib_deflate 21196 1 deflate des_generic 16119 0 cbc 2705 0 ecb 1959 0 crypto_blkcipher 13629 2 cbc,ecb sha1_generic 2079 0 md5 3985 0 hmac 2961 0 crypto_hash 14471 3 sha1_generic,md5,hmac cryptomgr 2652 0 aead 6121 1 cryptomgr crypto_algapi 15273 9 deflate,des_generic,cbc,ecb,crypto_blkcipher,hmac,crypto_hash,cryptomgr,aead af_key 27356 0 fuse 66684 1 w83627ehf 32036 0 hwmon_vid 2851 1 w83627ehf vhost_net 17239 5 powernow_k8 12884 0 mperf 1247 1 powernow_k8 kvm_amd 54109 20 kvm 238605 1 kvm_amd xhci_hcd 66960 0 k10temp 3199 0 i2c_piix4 8375 0 pl2303 12716 1 usbserial 34420 3 pl2303 ohci_hcd 17897 0 ehci_hcd 33721 0 usbcore 131192 5 xhci_hcd,pl2303,usbserial,ohci_hcd,ehci_hcd ahci 20732 4 libahci 21186 1 ahci sata_mv 26923 0 megaraid_sas 71785 14 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists