| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 24 Aug 2011 02:02:43 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, Paul Mackerras <paulus@...ba.org>,
Frank Cusack <fcusack@...sack.com>,
Michal Ostrowski <mostrows@...akeasy.net>,
Michal Ostrowski <mostrows@...thlink.net>,
Dmitry Kozlov <xeb@...l.ru>
Subject: [net-next 03/10] ppp: Move the PPP drivers
Move the PPP drivers into drivers/net/ppp/ and make the
necessary Kconfig and Makefile changes.
CC: Paul Mackerras <paulus@...ba.org>
CC: Frank Cusack <fcusack@...sack.com>
CC: Michal Ostrowski <mostrows@...akeasy.net>
CC: Michal Ostrowski <mostrows@...thlink.net>
CC: Dmitry Kozlov <xeb@...l.ru>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
MAINTAINERS | 8 +-
drivers/net/Kconfig | 170 +---------------------------------
drivers/net/Makefile | 10 +--
drivers/net/ppp/Kconfig | 176 +++++++++++++++++++++++++++++++++++
drivers/net/ppp/Makefile | 13 +++
drivers/net/{ => ppp}/bsd_comp.c | 0
drivers/net/{ => ppp}/ppp_async.c | 0
drivers/net/{ => ppp}/ppp_deflate.c | 0
drivers/net/{ => ppp}/ppp_generic.c | 0
drivers/net/{ => ppp}/ppp_mppe.c | 0
drivers/net/{ => ppp}/ppp_mppe.h | 0
drivers/net/{ => ppp}/ppp_synctty.c | 0
drivers/net/{ => ppp}/pppoe.c | 0
drivers/net/{ => ppp}/pppox.c | 0
drivers/net/{ => ppp}/pptp.c | 0
15 files changed, 196 insertions(+), 181 deletions(-)
create mode 100644 drivers/net/ppp/Kconfig
create mode 100644 drivers/net/ppp/Makefile
rename drivers/net/{ => ppp}/bsd_comp.c (100%)
rename drivers/net/{ => ppp}/ppp_async.c (100%)
rename drivers/net/{ => ppp}/ppp_deflate.c (100%)
rename drivers/net/{ => ppp}/ppp_generic.c (100%)
rename drivers/net/{ => ppp}/ppp_mppe.c (100%)
rename drivers/net/{ => ppp}/ppp_mppe.h (100%)
rename drivers/net/{ => ppp}/ppp_synctty.c (100%)
rename drivers/net/{ => ppp}/pppoe.c (100%)
rename drivers/net/{ => ppp}/pppox.c (100%)
rename drivers/net/{ => ppp}/pptp.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 2777088..c5ec925 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5066,7 +5066,7 @@ PPP PROTOCOL DRIVERS AND COMPRESSORS
M: Paul Mackerras <paulus@...ba.org>
L: linux-ppp@...r.kernel.org
S: Maintained
-F: drivers/net/ppp_*
+F: drivers/net/ppp/ppp_*
PPP OVER ATM (RFC 2364)
M: Mitchell Blank Jr <mitch@...oth.com>
@@ -5077,8 +5077,8 @@ F: include/linux/atmppp.h
PPP OVER ETHERNET
M: Michal Ostrowski <mostrows@...thlink.net>
S: Maintained
-F: drivers/net/pppoe.c
-F: drivers/net/pppox.c
+F: drivers/net/ppp/pppoe.c
+F: drivers/net/ppp/pppox.c
PPP OVER L2TP
M: James Chapman <jchapman@...alix.com>
@@ -5099,7 +5099,7 @@ PPTP DRIVER
M: Dmitry Kozlov <xeb@...l.ru>
L: netdev@...r.kernel.org
S: Maintained
-F: drivers/net/pptp.c
+F: drivers/net/ppp/pptp.c
W: http://sourceforge.net/projects/accel-pptp
PREEMPTIBLE KERNEL
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7bdc22b..c5e2a38 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -207,6 +207,8 @@ source "drivers/net/usb/Kconfig"
source "drivers/net/pcmcia/Kconfig"
+source "drivers/net/ppp/Kconfig"
+
source "drivers/net/wan/Kconfig"
source "drivers/atm/Kconfig"
@@ -337,174 +339,6 @@ config PLIP
will be called plip. If unsure, say Y or M, in case you buy
a laptop later.
-config PPP
- tristate "PPP (point-to-point protocol) support"
- select SLHC
- ---help---
- PPP (Point to Point Protocol) is a newer and better SLIP. It serves
- the same purpose: sending Internet traffic over telephone (and other
- serial) lines. Ask your access provider if they support it, because
- otherwise you can't use it; most Internet access providers these
- days support PPP rather than SLIP.
-
- To use PPP, you need an additional program called pppd as described
- in the PPP-HOWTO, available at
- <http://www.tldp.org/docs.html#howto>. Make sure that you have
- the version of pppd recommended in <file:Documentation/Changes>.
- The PPP option enlarges your kernel by about 16 KB.
-
- There are actually two versions of PPP: the traditional PPP for
- asynchronous lines, such as regular analog phone lines, and
- synchronous PPP which can be used over digital ISDN lines for
- example. If you want to use PPP over phone lines or other
- asynchronous serial lines, you need to say Y (or M) here and also to
- the next option, "PPP support for async serial ports". For PPP over
- synchronous lines, you should say Y (or M) here and to "Support
- synchronous PPP", below.
-
- If you said Y to "Version information on all symbols" above, then
- you cannot compile the PPP driver into the kernel; you can then only
- compile it as a module. To compile this driver as a module, choose M
- here. The module will be called ppp_generic.
-
-config PPP_MULTILINK
- bool "PPP multilink support (EXPERIMENTAL)"
- depends on PPP && EXPERIMENTAL
- help
- PPP multilink is a protocol (defined in RFC 1990) which allows you
- to combine several (logical or physical) lines into one logical PPP
- connection, so that you can utilize your full bandwidth.
-
- This has to be supported at the other end as well and you need a
- version of the pppd daemon which understands the multilink protocol.
-
- If unsure, say N.
-
-config PPP_FILTER
- bool "PPP filtering"
- depends on PPP
- help
- Say Y here if you want to be able to filter the packets passing over
- PPP interfaces. This allows you to control which packets count as
- activity (i.e. which packets will reset the idle timer or bring up
- a demand-dialed link) and which packets are to be dropped entirely.
- You need to say Y here if you wish to use the pass-filter and
- active-filter options to pppd.
-
- If unsure, say N.
-
-config PPP_ASYNC
- tristate "PPP support for async serial ports"
- depends on PPP
- select CRC_CCITT
- ---help---
- Say Y (or M) here if you want to be able to use PPP over standard
- asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
- a modem (not a synchronous or ISDN modem) to contact your ISP, you
- need this option.
-
- To compile this driver as a module, choose M here.
-
- If unsure, say Y.
-
-config PPP_SYNC_TTY
- tristate "PPP support for sync tty ports"
- depends on PPP
- help
- Say Y (or M) here if you want to be able to use PPP over synchronous
- (HDLC) tty devices, such as the SyncLink adapter. These devices
- are often used for high-speed leased lines like T1/E1.
-
- To compile this driver as a module, choose M here.
-
-config PPP_DEFLATE
- tristate "PPP Deflate compression"
- depends on PPP
- select ZLIB_INFLATE
- select ZLIB_DEFLATE
- ---help---
- Support for the Deflate compression method for PPP, which uses the
- Deflate algorithm (the same algorithm that gzip uses) to compress
- each PPP packet before it is sent over the wire. The machine at the
- other end of the PPP link (usually your ISP) has to support the
- Deflate compression method as well for this to be useful. Even if
- they don't support it, it is safe to say Y here.
-
- To compile this driver as a module, choose M here.
-
-config PPP_BSDCOMP
- tristate "PPP BSD-Compress compression"
- depends on PPP
- ---help---
- Support for the BSD-Compress compression method for PPP, which uses
- the LZW compression method to compress each PPP packet before it is
- sent over the wire. The machine at the other end of the PPP link
- (usually your ISP) has to support the BSD-Compress compression
- method as well for this to be useful. Even if they don't support it,
- it is safe to say Y here.
-
- The PPP Deflate compression method ("PPP Deflate compression",
- above) is preferable to BSD-Compress, because it compresses better
- and is patent-free.
-
- Note that the BSD compression code will always be compiled as a
- module; it is called bsd_comp and will show up in the directory
- modules once you have said "make modules". If unsure, say N.
-
-config PPP_MPPE
- tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
- depends on PPP && EXPERIMENTAL
- select CRYPTO
- select CRYPTO_SHA1
- select CRYPTO_ARC4
- select CRYPTO_ECB
- ---help---
- Support for the MPPE Encryption protocol, as employed by the
- Microsoft Point-to-Point Tunneling Protocol.
-
- See http://pptpclient.sourceforge.net/ for information on
- configuring PPTP clients and servers to utilize this method.
-
-config PPPOE
- tristate "PPP over Ethernet (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PPP
- help
- Support for PPP over Ethernet.
-
- This driver requires the latest version of pppd from the CVS
- repository at cvs.samba.org. Alternatively, see the
- RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
- which contains instruction on how to use this driver (under
- the heading "Kernel mode PPPoE").
-
-config PPTP
- tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX
- help
- Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
-
- This driver requires pppd plugin to work in client mode or
- modified pptpd (poptop) to work in server mode.
- See http://accel-pptp.sourceforge.net/ for information how to
- utilize this module.
-
-config PPPOATM
- tristate "PPP over ATM"
- depends on ATM && PPP
- help
- Support PPP (Point to Point Protocol) encapsulated in ATM frames.
- This implementation does not yet comply with section 8 of RFC2364,
- which can lead to bad results if the ATM peer loses state and
- changes its encapsulation unilaterally.
-
-config PPPOL2TP
- tristate "PPP over L2TP (EXPERIMENTAL)"
- depends on EXPERIMENTAL && L2TP && PPP
- help
- Support for PPP-over-L2TP socket family. L2TP is a protocol
- used by ISPs and enterprises to tunnel PPP traffic over UDP
- tunnels. L2TP is replacing PPTP for VPN uses.
-
config SLIP
tristate "SLIP (serial line) support"
---help---
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 3087b27..9ce7c70 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -22,15 +22,6 @@ obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_PPP) += ppp_generic.o
-obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
-obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
-obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
-obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
-obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
-obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
-obj-$(CONFIG_PPPOL2TP) += pppox.o
-obj-$(CONFIG_PPTP) += pppox.o pptp.o
obj-$(CONFIG_SLIP) += slip.o
obj-$(CONFIG_SLHC) += slhc.o
@@ -48,6 +39,7 @@ obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_FDDI) += fddi/
+onj-$(CONFIG_PPP) += ppp/
obj-$(CONFIG_TR) += tokenring/
obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_ARCNET) += arcnet/
diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig
new file mode 100644
index 0000000..bc60a40
--- /dev/null
+++ b/drivers/net/ppp/Kconfig
@@ -0,0 +1,176 @@
+#
+# PPP network device configuration
+#
+
+config PPP
+ tristate "PPP (point-to-point protocol) support"
+ depends on PCI || EISA || TC
+ select SLHC
+ ---help---
+ PPP (Point to Point Protocol) is a newer and better SLIP. It serves
+ the same purpose: sending Internet traffic over telephone (and other
+ serial) lines. Ask your access provider if they support it, because
+ otherwise you can't use it; most Internet access providers these
+ days support PPP rather than SLIP.
+
+ To use PPP, you need an additional program called pppd as described
+ in the PPP-HOWTO, available at
+ <http://www.tldp.org/docs.html#howto>. Make sure that you have
+ the version of pppd recommended in <file:Documentation/Changes>.
+ The PPP option enlarges your kernel by about 16 KB.
+
+ There are actually two versions of PPP: the traditional PPP for
+ asynchronous lines, such as regular analog phone lines, and
+ synchronous PPP which can be used over digital ISDN lines for
+ example. If you want to use PPP over phone lines or other
+ asynchronous serial lines, you need to say Y (or M) here and also to
+ the next option, "PPP support for async serial ports". For PPP over
+ synchronous lines, you should say Y (or M) here and to "Support
+ synchronous PPP", below.
+
+ If you said Y to "Version information on all symbols" above, then
+ you cannot compile the PPP driver into the kernel; you can then only
+ compile it as a module. To compile this driver as a module, choose M
+ here. The module will be called ppp_generic.
+
+if PPP
+
+config PPP_BSDCOMP
+ tristate "PPP BSD-Compress compression"
+ depends on PPP
+ ---help---
+ Support for the BSD-Compress compression method for PPP, which uses
+ the LZW compression method to compress each PPP packet before it is
+ sent over the wire. The machine at the other end of the PPP link
+ (usually your ISP) has to support the BSD-Compress compression
+ method as well for this to be useful. Even if they don't support it,
+ it is safe to say Y here.
+
+ The PPP Deflate compression method ("PPP Deflate compression",
+ above) is preferable to BSD-Compress, because it compresses better
+ and is patent-free.
+
+ Note that the BSD compression code will always be compiled as a
+ module; it is called bsd_comp and will show up in the directory
+ modules once you have said "make modules". If unsure, say N.
+
+config PPP_DEFLATE
+ tristate "PPP Deflate compression"
+ depends on PPP
+ select ZLIB_INFLATE
+ select ZLIB_DEFLATE
+ ---help---
+ Support for the Deflate compression method for PPP, which uses the
+ Deflate algorithm (the same algorithm that gzip uses) to compress
+ each PPP packet before it is sent over the wire. The machine at the
+ other end of the PPP link (usually your ISP) has to support the
+ Deflate compression method as well for this to be useful. Even if
+ they don't support it, it is safe to say Y here.
+
+ To compile this driver as a module, choose M here.
+
+config PPP_FILTER
+ bool "PPP filtering"
+ depends on PPP
+ ---help---
+ Say Y here if you want to be able to filter the packets passing over
+ PPP interfaces. This allows you to control which packets count as
+ activity (i.e. which packets will reset the idle timer or bring up
+ a demand-dialed link) and which packets are to be dropped entirely.
+ You need to say Y here if you wish to use the pass-filter and
+ active-filter options to pppd.
+
+ If unsure, say N.
+
+config PPP_MPPE
+ tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
+ depends on PPP && EXPERIMENTAL
+ select CRYPTO
+ select CRYPTO_SHA1
+ select CRYPTO_ARC4
+ select CRYPTO_ECB
+ ---help---
+ Support for the MPPE Encryption protocol, as employed by the
+ Microsoft Point-to-Point Tunneling Protocol.
+
+ See http://pptpclient.sourceforge.net/ for information on
+ configuring PPTP clients and servers to utilize this method.
+
+config PPP_MULTILINK
+ bool "PPP multilink support (EXPERIMENTAL)"
+ depends on PPP && EXPERIMENTAL
+ ---help---
+ PPP multilink is a protocol (defined in RFC 1990) which allows you
+ to combine several (logical or physical) lines into one logical PPP
+ connection, so that you can utilize your full bandwidth.
+
+ This has to be supported at the other end as well and you need a
+ version of the pppd daemon which understands the multilink protocol.
+
+ If unsure, say N.
+
+config PPPOATM
+ tristate "PPP over ATM"
+ depends on ATM && PPP
+ ---help---
+ Support PPP (Point to Point Protocol) encapsulated in ATM frames.
+ This implementation does not yet comply with section 8 of RFC2364,
+ which can lead to bad results if the ATM peer loses state and
+ changes its encapsulation unilaterally.
+
+config PPPOE
+ tristate "PPP over Ethernet (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && PPP
+ ---help---
+ Support for PPP over Ethernet.
+
+ This driver requires the latest version of pppd from the CVS
+ repository at cvs.samba.org. Alternatively, see the
+ RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
+ which contains instruction on how to use this driver (under
+ the heading "Kernel mode PPPoE").
+
+config PPTP
+ tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX
+ ---help---
+ Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
+
+ This driver requires pppd plugin to work in client mode or
+ modified pptpd (poptop) to work in server mode.
+ See http://accel-pptp.sourceforge.net/ for information how to
+ utilize this module.
+
+config PPPOL2TP
+ tristate "PPP over L2TP (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && L2TP && PPP
+ ---help---
+ Support for PPP-over-L2TP socket family. L2TP is a protocol
+ used by ISPs and enterprises to tunnel PPP traffic over UDP
+ tunnels. L2TP is replacing PPTP for VPN uses.
+
+config PPP_ASYNC
+ tristate "PPP support for async serial ports"
+ depends on PPP
+ select CRC_CCITT
+ ---help---
+ Say Y (or M) here if you want to be able to use PPP over standard
+ asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
+ a modem (not a synchronous or ISDN modem) to contact your ISP, you
+ need this option.
+
+ To compile this driver as a module, choose M here.
+
+ If unsure, say Y.
+
+config PPP_SYNC_TTY
+ tristate "PPP support for sync tty ports"
+ depends on PPP
+ ---help---
+ Say Y (or M) here if you want to be able to use PPP over synchronous
+ (HDLC) tty devices, such as the SyncLink adapter. These devices
+ are often used for high-speed leased lines like T1/E1.
+
+ To compile this driver as a module, choose M here.
+
+endif # PPP
diff --git a/drivers/net/ppp/Makefile b/drivers/net/ppp/Makefile
new file mode 100644
index 0000000..a6b6297
--- /dev/null
+++ b/drivers/net/ppp/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the Linux PPP network device drivers.
+#
+
+obj-$(CONFIG_PPP) += ppp_generic.o
+obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
+obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
+obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
+obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
+obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
+obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
+obj-$(CONFIG_PPPOL2TP) += pppox.o
+obj-$(CONFIG_PPTP) += pppox.o pptp.o
diff --git a/drivers/net/bsd_comp.c b/drivers/net/ppp/bsd_comp.c
similarity index 100%
rename from drivers/net/bsd_comp.c
rename to drivers/net/ppp/bsd_comp.c
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp/ppp_async.c
similarity index 100%
rename from drivers/net/ppp_async.c
rename to drivers/net/ppp/ppp_async.c
diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp/ppp_deflate.c
similarity index 100%
rename from drivers/net/ppp_deflate.c
rename to drivers/net/ppp/ppp_deflate.c
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp/ppp_generic.c
similarity index 100%
rename from drivers/net/ppp_generic.c
rename to drivers/net/ppp/ppp_generic.c
diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c
similarity index 100%
rename from drivers/net/ppp_mppe.c
rename to drivers/net/ppp/ppp_mppe.c
diff --git a/drivers/net/ppp_mppe.h b/drivers/net/ppp/ppp_mppe.h
similarity index 100%
rename from drivers/net/ppp_mppe.h
rename to drivers/net/ppp/ppp_mppe.h
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c
similarity index 100%
rename from drivers/net/ppp_synctty.c
rename to drivers/net/ppp/ppp_synctty.c
diff --git a/drivers/net/pppoe.c b/drivers/net/ppp/pppoe.c
similarity index 100%
rename from drivers/net/pppoe.c
rename to drivers/net/ppp/pppoe.c
diff --git a/drivers/net/pppox.c b/drivers/net/ppp/pppox.c
similarity index 100%
rename from drivers/net/pppox.c
rename to drivers/net/ppp/pppox.c
diff --git a/drivers/net/pptp.c b/drivers/net/ppp/pptp.c
similarity index 100%
rename from drivers/net/pptp.c
rename to drivers/net/ppp/pptp.c
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists