netdev - [PATCH 8/9] stmmac: update the doc with new info about the driver's debug.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1314259229-13767-9-git-send-email-peppe.cavallaro@st.com>
Date:	Thu, 25 Aug 2011 10:00:28 +0200
From:	Giuseppe CAVALLARO <peppe.cavallaro@...com>
To:	netdev@...r.kernel.org
Cc:	Giuseppe Cavallaro <peppe.cavallaro@...com>
Subject: [PATCH 8/9] stmmac: update the doc with new info about the driver's debug.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
---
 Documentation/networking/stmmac.txt |   39 ++++++++++++++++++++++++++++++++++-
 1 files changed, 38 insertions(+), 1 deletions(-)

diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index 57a2410..d82e180 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -235,7 +235,44 @@ reset procedure etc).
  o enh_desc.c: functions for handling enhanced descriptors
  o norm_desc.c: functions for handling normal descriptors
 
-5) TODO:
+5) Debug Information
+
+The driver exports many information i.e. internal statistics,
+debug information, MAC and DMA registers etc.
+
+These can be read in several ways depending on the
+type of the information actually needed.
+
+For example a user can be use the ethtool support
+to get statistics: e.g. using: ethtool -S ethX
+or sees the MAC/DMA registers: e.g. using: ethtool -d ethX
+
+Compiling the Kernel with CONFIG_DEBUG_FS and enabling the
+STMMAC_MONITORING option the driver will export the following
+debugfs entries:
+
+/sys/kernel/debug/stmmaceth/descriptors_status
+  To show the DMA TX/RX descriptor rings
+
+/sys/kernel/debug/stmmaceth/mmc
+  To show the internal Management counters (MMC)
+  if supported in the core.
+
+/sys/kernel/debug/stmmaceth/dma_cap
+  To show the DMA HW features register (if supported)
+
+Developer can also use the "debug" module parameter to get
+further debug information.
+
+In the end, there are other macros (that cannot be enabled
+via menuconfig) to turn-on the RX/TX DMA debugging,
+specific MAC core debug printk etc. Others to enable the
+debug in the TX and RX processes.
+All these are only useful during the developing stage
+and should never enabled inside the code for general usage.
+In fact, these can generate an huge amount of debug messages.
+
+6) TODO:
  o XGMAC is not supported.
  o Review the timer optimisation code to use an embedded device that will be
   available in new chip generations.
-- 
1.7.4.4

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html