| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1314438916-2478-6-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Sat, 27 Aug 2011 02:55:11 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, Niibe Yutaka <gniibe@....co.jp>
Subject: [net-next 05/10] plip: Move the PLIP driver
Move the Parallel Line Internet Protocol (PLIP) driver into
drivers/net/plip/ and make the necessary Kconfig and Makefile changes.
CC: Niibe Yutaka <gniibe@....co.jp>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Acked-by: Alan Cox <alan@...ux.intel.com>
---
drivers/net/Kconfig | 37 ++-----------------------------------
drivers/net/Makefile | 2 +-
drivers/net/plip/Kconfig | 38 ++++++++++++++++++++++++++++++++++++++
drivers/net/plip/Makefile | 5 +++++
drivers/net/{ => plip}/plip.c | 0
5 files changed, 46 insertions(+), 36 deletions(-)
create mode 100644 drivers/net/plip/Kconfig
create mode 100644 drivers/net/plip/Makefile
rename drivers/net/{ => plip}/plip.c (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1d8fa95..3f72686 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -197,6 +197,8 @@ source "drivers/net/ethernet/Kconfig"
source "drivers/net/fddi/Kconfig"
+source "drivers/net/plip/Kconfig"
+
source "drivers/net/tokenring/Kconfig"
source "drivers/net/wireless/Kconfig"
@@ -272,41 +274,6 @@ config RIONET_RX_SIZE
depends on RIONET
default "128"
-config PLIP
- tristate "PLIP (parallel port) support"
- depends on PARPORT
- ---help---
- PLIP (Parallel Line Internet Protocol) is used to create a
- reasonably fast mini network consisting of two (or, rarely, more)
- local machines. A PLIP link from a Linux box is a popular means to
- install a Linux distribution on a machine which doesn't have a
- CD-ROM drive (a minimal system has to be transferred with floppies
- first). The kernels on both machines need to have this PLIP option
- enabled for this to work.
-
- The PLIP driver has two modes, mode 0 and mode 1. The parallel
- ports (the connectors at the computers with 25 holes) are connected
- with "null printer" or "Turbo Laplink" cables which can transmit 4
- bits at a time (mode 0) or with special PLIP cables, to be used on
- bidirectional parallel ports only, which can transmit 8 bits at a
- time (mode 1); you can find the wiring of these cables in
- <file:Documentation/networking/PLIP.txt>. The cables can be up to
- 15m long. Mode 0 works also if one of the machines runs DOS/Windows
- and has some PLIP software installed, e.g. the Crynwr PLIP packet
- driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
- and winsock or NCSA's telnet.
-
- If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
- as the NET-3-HOWTO, both available from
- <http://www.tldp.org/docs.html#howto>. Note that the PLIP
- protocol has been changed and this PLIP driver won't work together
- with the PLIP support in Linux versions 1.0.x. This option enlarges
- your kernel by about 8 KB.
-
- To compile this driver as a module, choose M here. The module
- will be called plip. If unsure, say Y or M, in case you buy
- a laptop later.
-
config SLIP
tristate "SLIP (serial line) support"
---help---
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index f64d02c..52dae95 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_VMXNET3) += vmxnet3/
#
# link order important here
#
-obj-$(CONFIG_PLIP) += plip.o
obj-$(CONFIG_RIONET) += rionet.o
#
@@ -39,6 +38,7 @@ obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_FDDI) += fddi/
obj-$(CONFIG_HIPPI) += hippi/
+obj-$(CONFIG_PLIP) += plip/
onj-$(CONFIG_PPP) += ppp/
obj-$(CONFIG_PPP_ASYNC) += ppp/
obj-$(CONFIG_PPP_BSDCOMP) += ppp/
diff --git a/drivers/net/plip/Kconfig b/drivers/net/plip/Kconfig
new file mode 100644
index 0000000..80c4a33
--- /dev/null
+++ b/drivers/net/plip/Kconfig
@@ -0,0 +1,38 @@
+#
+# Parallel Line Internet Protocol (PLIP) network device configuration
+#
+
+config PLIP
+ tristate "PLIP (parallel port) support"
+ depends on PARPORT
+ ---help---
+ PLIP (Parallel Line Internet Protocol) is used to create a
+ reasonably fast mini network consisting of two (or, rarely, more)
+ local machines. A PLIP link from a Linux box is a popular means to
+ install a Linux distribution on a machine which doesn't have a
+ CD-ROM drive (a minimal system has to be transferred with floppies
+ first). The kernels on both machines need to have this PLIP option
+ enabled for this to work.
+
+ The PLIP driver has two modes, mode 0 and mode 1. The parallel
+ ports (the connectors at the computers with 25 holes) are connected
+ with "null printer" or "Turbo Laplink" cables which can transmit 4
+ bits at a time (mode 0) or with special PLIP cables, to be used on
+ bidirectional parallel ports only, which can transmit 8 bits at a
+ time (mode 1); you can find the wiring of these cables in
+ <file:Documentation/networking/PLIP.txt>. The cables can be up to
+ 15m long. Mode 0 works also if one of the machines runs DOS/Windows
+ and has some PLIP software installed, e.g. the Crynwr PLIP packet
+ driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
+ and winsock or NCSA's telnet.
+
+ If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
+ as the NET-3-HOWTO, both available from
+ <http://www.tldp.org/docs.html#howto>. Note that the PLIP
+ protocol has been changed and this PLIP driver won't work together
+ with the PLIP support in Linux versions 1.0.x. This option enlarges
+ your kernel by about 8 KB.
+
+ To compile this driver as a module, choose M here. The module
+ will be called plip. If unsure, say Y or M, in case you buy
+ a laptop later.
diff --git a/drivers/net/plip/Makefile b/drivers/net/plip/Makefile
new file mode 100644
index 0000000..ed95879
--- /dev/null
+++ b/drivers/net/plip/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the PLIP network device drivers.
+#
+
+obj-$(CONFIG_PLIP) += plip.o
diff --git a/drivers/net/plip.c b/drivers/net/plip/plip.c
similarity index 100%
rename from drivers/net/plip.c
rename to drivers/net/plip/plip.c
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists