| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1314802836-9862-4-git-send-email-mschmidt@redhat.com>
Date: Wed, 31 Aug 2011 17:00:36 +0200
From: Michal Schmidt <mschmidt@...hat.com>
To: netdev@...r.kernel.org
Cc: vladz@...adcom.com, dmitry@...adcom.com, eilong@...adcom.com,
mirqus@...il.com
Subject: [PATCH 3/3] bnx2x: expose HW RX VLAN stripping toggle
Allow disabling of HW RX VLAN stripping with ethtool.
[v3: per-queue flag was overkill, store the HW config in bp.
Suggestions by Vlad Zolotarov and Michał Mirosław.]
Signed-off-by: Michal Schmidt <mschmidt@...hat.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 20 +++++++++++++++-----
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 +++++-----
3 files changed, 21 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 5d5f323..b85017e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1174,7 +1174,7 @@ struct bnx2x {
#define USING_MSIX_FLAG (1 << 5)
#define USING_MSI_FLAG (1 << 6)
#define DISABLE_MSI_FLAG (1 << 7)
-
+#define RX_VLAN_STRIP_FLAG (1 << 8)
#define NO_MCP_FLAG (1 << 9)
#define BP_NOMCP(bp) (bp->flags & NO_MCP_FLAG)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index c660317..6e1b4b4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -385,6 +385,10 @@ static inline u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags,
else /* IPv4 */
hdrs_len += sizeof(struct iphdr);
+ /* VLAN header present and not stripped by HW */
+ if ((parsing_flags & PARSING_FLAGS_VLAN) &&
+ !(bp->flags & RX_VLAN_STRIP_FLAG))
+ hdrs_len += VLAN_HLEN;
/* Check if there was a TCP timestamp, if there is it's will
* always be 12 bytes length: nop nop kind length echo val.
@@ -412,7 +416,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
frag_size = le16_to_cpu(cqe->pkt_len) - len_on_bd;
pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT;
- /* This is needed in order to enable forwarding support */
+ /* Doing LRO, let TCP know the receive MSS */
if (frag_size)
skb_shinfo(skb)->gso_size = bnx2x_set_lro_mss(bp,
tpa_info->parsing_flags, len_on_bd);
@@ -514,7 +518,8 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
skb->ip_summed = CHECKSUM_UNNECESSARY;
if (!bnx2x_fill_frag_skb(bp, fp, queue, skb, cqe, cqe_idx)) {
- if (tpa_info->parsing_flags & PARSING_FLAGS_VLAN)
+ if ((tpa_info->parsing_flags & PARSING_FLAGS_VLAN) &&
+ (bp->flags & RX_VLAN_STRIP_FLAG))
__vlan_hwaccel_put_tag(skb, tpa_info->vlan_tag);
napi_gro_receive(&fp->napi, skb);
} else {
@@ -745,8 +750,8 @@ reuse_rx:
skb_record_rx_queue(skb, fp->index);
- if (le16_to_cpu(cqe_fp->pars_flags.flags) &
- PARSING_FLAGS_VLAN)
+ if ((le16_to_cpu(cqe_fp->pars_flags.flags) &
+ PARSING_FLAGS_VLAN) && (bp->flags & RX_VLAN_STRIP_FLAG))
__vlan_hwaccel_put_tag(skb,
le16_to_cpu(cqe_fp->vlan_tag));
napi_gro_receive(&fp->napi, skb);
@@ -1711,6 +1716,11 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
+ if (bp->dev->features & NETIF_F_HW_VLAN_RX)
+ bp->flags |= RX_VLAN_STRIP_FLAG;
+ else
+ bp->flags &= ~RX_VLAN_STRIP_FLAG;
+
/* Set the initial link reported state to link down */
bnx2x_acquire_phy_lock(bp);
memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link));
@@ -3412,7 +3422,7 @@ int bnx2x_set_features(struct net_device *dev, u32 features)
struct bnx2x *bp = netdev_priv(dev);
bool bnx2x_reload = false;
- if ((features ^ dev->features) & NETIF_F_LRO)
+ if ((features ^ dev->features) & (NETIF_F_LRO | NETIF_F_HW_VLAN_RX))
bnx2x_reload = true;
if (features & NETIF_F_LOOPBACK) {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c1285db..e61be4e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -2720,9 +2720,8 @@ static inline unsigned long bnx2x_get_q_flags(struct bnx2x *bp,
__set_bit(BNX2X_Q_FLG_MCAST, &flags);
}
- /* Always set HW VLAN stripping */
- __set_bit(BNX2X_Q_FLG_VLAN, &flags);
-
+ if (bp->flags & RX_VLAN_STRIP_FLAG)
+ __set_bit(BNX2X_Q_FLG_VLAN, &flags);
return flags | bnx2x_get_common_flags(bp, fp, true);
}
@@ -10265,12 +10264,13 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_LRO |
- NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_HW_VLAN_TX;
+ NETIF_F_RXCSUM | NETIF_F_RXHASH |
+ NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
- dev->features |= dev->hw_features | NETIF_F_HW_VLAN_RX;
+ dev->features |= dev->hw_features;
if (bp->flags & USING_DAC_FLAG)
dev->features |= NETIF_F_HIGHDMA;
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists