lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20110918180912.GA3734@electric-eye.fr.zoreil.com>
Date:	Sun, 18 Sep 2011 20:09:12 +0200
From:	Francois Romieu <romieu@...zoreil.com>
To:	Shawn Guo <shawn.guo@...aro.org>
Cc:	netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
	linux-arm-kernel@...ts.infradead.org, patches@...aro.org
Subject: Re: [PATCH 4/4] net/fec: add imx6q enet support

Shawn Guo <shawn.guo@...aro.org> :
[...]
> diff --git a/drivers/net/fec.c b/drivers/net/fec.c
> index 04206e4..849cb0b 100644
> --- a/drivers/net/fec.c
> +++ b/drivers/net/fec.c
> @@ -442,18 +453,23 @@ fec_restart(struct net_device *ndev, int duplex)
>  		/* Enable flow control and length check */
>  		rcntl |= 0x40000000 | 0x00000020;
>  
> -		/* MII or RMII */
> +		/* RGMII, RMII or MII */
> +		if (fep->phy_interface == PHY_INTERFACE_MODE_RGMII)
> +			rcntl |= (1 << 6);
>  		if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
           ^^^^ missing "else"

[...]
> +		/* 1G, 100M or 10M */
> +		if (fep->phy_dev) {
> +			if (fep->phy_dev->speed == SPEED_1000)
> +				ecntl |= (1 << 8);
> +			else if (fep->phy_dev->speed == SPEED_100)
> +				rcntl &= ~(1 << 9);
> +			else
> +				rcntl |= (1 << 9);
> +		}
[...]
> +	if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
> +		/* enable ENET endian swap */
> +		ecntl |= (1 << 8);

I do not understand why the endian swap bit of ecntl needs to be
set the same in these two different paths, especially as the latter
handles the old faulty imx28 and the former the newly fixed imx6q.
Typo ?

-- 
Ueimor
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ