| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1316830458-24773-2-git-send-email-rmody@brocade.com>
Date: Fri, 23 Sep 2011 19:14:12 -0700
From: Rasesh Mody <rmody@...cade.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>
CC: <adapter_linux_open_src_team@...cade.com>,
Rasesh Mody <rmody@...cade.com>,
Gurunatha Karaje <gkaraje@...cade.com>
Subject: [net-next 1/7] bna: Brocade 1860 IOC PLL, Reg Defs and ASIC Mode Changes
Add logic to set ASIC specfic interface in IOC, HW interface initialization
APIs, mode based initialization and MSI-X resource allocation for 1860 with
no asic block. Add new h/w specific register definitions and setup registers
used by IOC logic.
Signed-off-by: Gurunatha Karaje <gkaraje@...cade.com>
Signed-off-by: Rasesh Mody <rmody@...cade.com>
---
drivers/net/ethernet/brocade/bna/bfa_ioc.c | 8 +-
drivers/net/ethernet/brocade/bna/bfa_ioc.h | 2 +
drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c | 354 +++++++++++++++++++++++++
3 files changed, 363 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index 4282fef..1e60aa7 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -1981,7 +1981,13 @@ bfa_nw_ioc_pci_init(struct bfa_ioc *ioc, struct bfa_pcidev *pcidev,
BUG_ON(1);
}
- bfa_nw_ioc_set_ct_hwif(ioc);
+ /**
+ * Set asic specific interfaces.
+ */
+ if (ioc->asic_gen == BFI_ASIC_GEN_CT)
+ bfa_nw_ioc_set_ct_hwif(ioc);
+ else
+ bfa_nw_ioc_set_ct2_hwif(ioc);
bfa_ioc_map_port(ioc);
bfa_ioc_reg_init(ioc);
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.h b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
index e11496d..5899a56 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.h
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.h
@@ -72,6 +72,7 @@ struct bfa_ioc_regs {
void __iomem *hfn_mbox;
void __iomem *lpu_mbox_cmd;
void __iomem *lpu_mbox;
+ void __iomem *lpu_read_stat;
void __iomem *pss_ctl_reg;
void __iomem *pss_err_status_reg;
void __iomem *app_pll_fast_ctl_reg;
@@ -287,6 +288,7 @@ void bfa_nw_ioc_mbox_regisr(struct bfa_ioc *ioc, enum bfi_mclass mc,
} while (0)
void bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc);
+void bfa_nw_ioc_set_ct2_hwif(struct bfa_ioc *ioc);
void bfa_nw_ioc_attach(struct bfa_ioc *ioc, void *bfa,
struct bfa_ioc_cbfn *cbfn);
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
index 7d0d8ff..6d956be 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c
@@ -37,7 +37,9 @@
static bool bfa_ioc_ct_firmware_lock(struct bfa_ioc *ioc);
static void bfa_ioc_ct_firmware_unlock(struct bfa_ioc *ioc);
static void bfa_ioc_ct_reg_init(struct bfa_ioc *ioc);
+static void bfa_ioc_ct2_reg_init(struct bfa_ioc *ioc);
static void bfa_ioc_ct_map_port(struct bfa_ioc *ioc);
+static void bfa_ioc_ct2_map_port(struct bfa_ioc *ioc);
static void bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix);
static void bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc);
static void bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc);
@@ -48,6 +50,9 @@ static void bfa_ioc_ct_sync_ack(struct bfa_ioc *ioc);
static bool bfa_ioc_ct_sync_complete(struct bfa_ioc *ioc);
static enum bfa_status bfa_ioc_ct_pll_init(void __iomem *rb,
enum bfi_asic_mode asic_mode);
+static enum bfa_status bfa_ioc_ct2_pll_init(void __iomem *rb,
+ enum bfi_asic_mode asic_mode);
+static bool bfa_ioc_ct2_lpu_read_stat(struct bfa_ioc *ioc);
static const struct bfa_ioc_hwif nw_hwif_ct = {
.ioc_pll_init = bfa_ioc_ct_pll_init,
@@ -65,6 +70,23 @@ static const struct bfa_ioc_hwif nw_hwif_ct = {
.ioc_sync_complete = bfa_ioc_ct_sync_complete,
};
+static const struct bfa_ioc_hwif nw_hwif_ct2 = {
+ .ioc_pll_init = bfa_ioc_ct2_pll_init,
+ .ioc_firmware_lock = bfa_ioc_ct_firmware_lock,
+ .ioc_firmware_unlock = bfa_ioc_ct_firmware_unlock,
+ .ioc_reg_init = bfa_ioc_ct2_reg_init,
+ .ioc_map_port = bfa_ioc_ct2_map_port,
+ .ioc_lpu_read_stat = bfa_ioc_ct2_lpu_read_stat,
+ .ioc_isr_mode_set = NULL,
+ .ioc_notify_fail = bfa_ioc_ct_notify_fail,
+ .ioc_ownership_reset = bfa_ioc_ct_ownership_reset,
+ .ioc_sync_start = bfa_ioc_ct_sync_start,
+ .ioc_sync_join = bfa_ioc_ct_sync_join,
+ .ioc_sync_leave = bfa_ioc_ct_sync_leave,
+ .ioc_sync_ack = bfa_ioc_ct_sync_ack,
+ .ioc_sync_complete = bfa_ioc_ct_sync_complete,
+};
+
/**
* Called from bfa_ioc_attach() to map asic specific calls.
*/
@@ -74,6 +96,12 @@ bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc)
ioc->ioc_hwif = &nw_hwif_ct;
}
+void
+bfa_nw_ioc_set_ct2_hwif(struct bfa_ioc *ioc)
+{
+ ioc->ioc_hwif = &nw_hwif_ct2;
+}
+
/**
* Return true if firmware of current driver matches the running firmware.
*/
@@ -197,6 +225,16 @@ static struct { u32 hfn, lpu; } ct_p1reg[] = {
{ HOSTFN3_LPU1_CMD_STAT, LPU1_HOSTFN3_CMD_STAT }
};
+static struct { u32 hfn_mbox, lpu_mbox, hfn_pgn, hfn, lpu, lpu_read; }
+ ct2_reg[] = {
+ { CT2_HOSTFN_LPU0_MBOX0, CT2_LPU0_HOSTFN_MBOX0, CT2_HOSTFN_PAGE_NUM,
+ CT2_HOSTFN_LPU0_CMD_STAT, CT2_LPU0_HOSTFN_CMD_STAT,
+ CT2_HOSTFN_LPU0_READ_STAT},
+ { CT2_HOSTFN_LPU1_MBOX0, CT2_LPU1_HOSTFN_MBOX0, CT2_HOSTFN_PAGE_NUM,
+ CT2_HOSTFN_LPU1_CMD_STAT, CT2_LPU1_HOSTFN_CMD_STAT,
+ CT2_HOSTFN_LPU1_READ_STAT},
+};
+
static void
bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
{
@@ -256,6 +294,64 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
ioc->ioc_regs.err_set = (rb + ERR_SET_REG);
}
+static void
+bfa_ioc_ct2_reg_init(struct bfa_ioc *ioc)
+{
+ void __iomem *rb;
+ int port = bfa_ioc_portid(ioc);
+
+ rb = bfa_ioc_bar0(ioc);
+
+ ioc->ioc_regs.hfn_mbox = rb + ct2_reg[port].hfn_mbox;
+ ioc->ioc_regs.lpu_mbox = rb + ct2_reg[port].lpu_mbox;
+ ioc->ioc_regs.host_page_num_fn = rb + ct2_reg[port].hfn_pgn;
+ ioc->ioc_regs.hfn_mbox_cmd = rb + ct2_reg[port].hfn;
+ ioc->ioc_regs.lpu_mbox_cmd = rb + ct2_reg[port].lpu;
+ ioc->ioc_regs.lpu_read_stat = rb + ct2_reg[port].lpu_read;
+
+ if (port == 0) {
+ ioc->ioc_regs.heartbeat = rb + CT2_BFA_IOC0_HBEAT_REG;
+ ioc->ioc_regs.ioc_fwstate = rb + CT2_BFA_IOC0_STATE_REG;
+ ioc->ioc_regs.alt_ioc_fwstate = rb + CT2_BFA_IOC1_STATE_REG;
+ ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
+ ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1;
+ } else {
+ ioc->ioc_regs.heartbeat = (rb + CT2_BFA_IOC1_HBEAT_REG);
+ ioc->ioc_regs.ioc_fwstate = (rb + CT2_BFA_IOC1_STATE_REG);
+ ioc->ioc_regs.alt_ioc_fwstate = rb + CT2_BFA_IOC0_STATE_REG;
+ ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
+ ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0;
+ }
+
+ /*
+ * PSS control registers
+ */
+ ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG);
+ ioc->ioc_regs.pss_err_status_reg = (rb + PSS_ERR_STATUS_REG);
+ ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + CT2_APP_PLL_LCLK_CTL_REG);
+ ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + CT2_APP_PLL_SCLK_CTL_REG);
+
+ /*
+ * IOC semaphore registers and serialization
+ */
+ ioc->ioc_regs.ioc_sem_reg = (rb + CT2_HOST_SEM0_REG);
+ ioc->ioc_regs.ioc_usage_sem_reg = (rb + CT2_HOST_SEM1_REG);
+ ioc->ioc_regs.ioc_init_sem_reg = (rb + CT2_HOST_SEM2_REG);
+ ioc->ioc_regs.ioc_usage_reg = (rb + CT2_BFA_FW_USE_COUNT);
+ ioc->ioc_regs.ioc_fail_sync = (rb + CT2_BFA_IOC_FAIL_SYNC);
+
+ /**
+ * sram memory access
+ */
+ ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START);
+ ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT;
+
+ /*
+ * err set reg : for notification of hb failure in fcmode
+ */
+ ioc->ioc_regs.err_set = (rb + ERR_SET_REG);
+}
+
/**
* Initialize IOC to port mapping.
*/
@@ -276,6 +372,16 @@ bfa_ioc_ct_map_port(struct bfa_ioc *ioc)
}
+static void
+bfa_ioc_ct2_map_port(struct bfa_ioc *ioc)
+{
+ void __iomem *rb = ioc->pcidev.pci_bar_kva;
+ u32 r32;
+
+ r32 = readl(rb + CT2_HOSTFN_PERSONALITY0);
+ ioc->port_id = ((r32 & __FC_LL_PORT_MAP__MK) >> __FC_LL_PORT_MAP__SH);
+}
+
/**
* Set interrupt mode for a function: INTX or MSIX
*/
@@ -307,6 +413,50 @@ bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix)
writel(r32, rb + FNC_PERS_REG);
}
+static bool
+bfa_ioc_ct2_lpu_read_stat(struct bfa_ioc *ioc)
+{
+ u32 r32;
+
+ r32 = readl(ioc->ioc_regs.lpu_read_stat);
+ if (r32) {
+ writel(1, ioc->ioc_regs.lpu_read_stat);
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * MSI-X resource allocation for 1860 with no asic block
+ */
+#define HOSTFN_MSIX_DEFAULT 64
+#define HOSTFN_MSIX_VT_INDEX_MBOX_ERR 0x30138
+#define HOSTFN_MSIX_VT_OFST_NUMVT 0x3013c
+#define __MSIX_VT_NUMVT__MK 0x003ff800
+#define __MSIX_VT_NUMVT__SH 11
+#define __MSIX_VT_NUMVT_(_v) ((_v) << __MSIX_VT_NUMVT__SH)
+#define __MSIX_VT_OFST_ 0x000007ff
+void
+bfa_ioc_ct2_poweron(struct bfa_ioc *ioc)
+{
+ void __iomem *rb = ioc->pcidev.pci_bar_kva;
+ u32 r32;
+
+ r32 = readl(rb + HOSTFN_MSIX_VT_OFST_NUMVT);
+ if (r32 & __MSIX_VT_NUMVT__MK) {
+ writel(r32 & __MSIX_VT_OFST_,
+ rb + HOSTFN_MSIX_VT_INDEX_MBOX_ERR);
+ return;
+ }
+
+ writel(__MSIX_VT_NUMVT_(HOSTFN_MSIX_DEFAULT - 1) |
+ HOSTFN_MSIX_DEFAULT * bfa_ioc_pcifn(ioc),
+ rb + HOSTFN_MSIX_VT_OFST_NUMVT);
+ writel(HOSTFN_MSIX_DEFAULT * bfa_ioc_pcifn(ioc),
+ rb + HOSTFN_MSIX_VT_INDEX_MBOX_ERR);
+}
+
/**
* Cleanup hw semaphore and usecnt registers
*/
@@ -499,3 +649,207 @@ bfa_ioc_ct_pll_init(void __iomem *rb, enum bfi_asic_mode asic_mode)
writel(0, (rb + MBIST_CTL_REG));
return BFA_STATUS_OK;
}
+
+static void
+bfa_ioc_ct2_sclk_init(void __iomem *rb)
+{
+ u32 r32;
+
+ /*
+ * put s_clk PLL and PLL FSM in reset
+ */
+ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 &= ~(__APP_PLL_SCLK_ENABLE | __APP_PLL_SCLK_LRESETN);
+ r32 |= (__APP_PLL_SCLK_ENARST | __APP_PLL_SCLK_BYPASS |
+ __APP_PLL_SCLK_LOGIC_SOFT_RESET);
+ writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * Ignore mode and program for the max clock (which is FC16)
+ * Firmware/NFC will do the PLL init appropiately
+ */
+ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 &= ~(__APP_PLL_SCLK_REFCLK_SEL | __APP_PLL_SCLK_CLK_DIV2);
+ writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * while doing PLL init dont clock gate ethernet subsystem
+ */
+ r32 = readl((rb + CT2_CHIP_MISC_PRG));
+ writel((r32 | __ETH_CLK_ENABLE_PORT0),
+ (rb + CT2_CHIP_MISC_PRG));
+
+ r32 = readl((rb + CT2_PCIE_MISC_REG));
+ writel((r32 | __ETH_CLK_ENABLE_PORT1),
+ (rb + CT2_PCIE_MISC_REG));
+
+ /*
+ * set sclk value
+ */
+ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ r32 &= (__P_SCLK_PLL_LOCK | __APP_PLL_SCLK_REFCLK_SEL |
+ __APP_PLL_SCLK_CLK_DIV2);
+ writel(r32 | 0x1061731b, (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * poll for s_clk lock or delay 1ms
+ */
+ udelay(1000);
+
+ /*
+ * Dont do clock gating for ethernet subsystem, firmware/NFC will
+ * do this appropriately
+ */
+}
+
+static void
+bfa_ioc_ct2_lclk_init(void __iomem *rb)
+{
+ u32 r32;
+
+ /*
+ * put l_clk PLL and PLL FSM in reset
+ */
+ r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ r32 &= ~(__APP_PLL_LCLK_ENABLE | __APP_PLL_LCLK_LRESETN);
+ r32 |= (__APP_PLL_LCLK_ENARST | __APP_PLL_LCLK_BYPASS |
+ __APP_PLL_LCLK_LOGIC_SOFT_RESET);
+ writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+ /*
+ * set LPU speed (set for FC16 which will work for other modes)
+ */
+ r32 = readl((rb + CT2_CHIP_MISC_PRG));
+ writel(r32, (rb + CT2_CHIP_MISC_PRG));
+
+ /*
+ * set LPU half speed (set for FC16 which will work for other modes)
+ */
+ r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+ /*
+ * set lclk for mode (set for FC16)
+ */
+ r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ r32 &= (__P_LCLK_PLL_LOCK | __APP_LPUCLK_HALFSPEED);
+ r32 |= 0x20c1731b;
+ writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+ /*
+ * poll for s_clk lock or delay 1ms
+ */
+ udelay(1000);
+}
+
+static void
+bfa_ioc_ct2_mem_init(void __iomem *rb)
+{
+ u32 r32;
+
+ r32 = readl((rb + PSS_CTL_REG));
+ r32 &= ~__PSS_LMEM_RESET;
+ writel(r32, (rb + PSS_CTL_REG));
+ udelay(1000);
+
+ writel(__EDRAM_BISTR_START, (rb + CT2_MBIST_CTL_REG));
+ udelay(1000);
+ writel(0, (rb + CT2_MBIST_CTL_REG));
+}
+
+static void
+bfa_ioc_ct2_mac_reset(void __iomem *rb)
+{
+ volatile u32 r32;
+
+ bfa_ioc_ct2_sclk_init(rb);
+ bfa_ioc_ct2_lclk_init(rb);
+
+ /*
+ * release soft reset on s_clk & l_clk
+ */
+ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ writel((r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET),
+ (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * release soft reset on s_clk & l_clk
+ */
+ r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+ writel((r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET),
+ (rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+ /* put port0, port1 MAC & AHB in reset */
+ writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET),
+ (rb + CT2_CSI_MAC_CONTROL_REG(0)));
+ writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET),
+ (rb + CT2_CSI_MAC_CONTROL_REG(1)));
+}
+
+#define CT2_NFC_MAX_DELAY 1000
+static enum bfa_status
+bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode asic_mode)
+{
+ volatile u32 wgn, r32;
+ int i;
+
+ /*
+ * Initialize PLL if not already done by NFC
+ */
+ wgn = readl(rb + CT2_WGN_STATUS);
+ if (!(wgn & __GLBL_PF_VF_CFG_RDY)) {
+ writel(__HALT_NFC_CONTROLLER, (rb + CT2_NFC_CSR_SET_REG));
+ for (i = 0; i < CT2_NFC_MAX_DELAY; i++) {
+ r32 = readl(rb + CT2_NFC_CSR_SET_REG);
+ if (r32 & __NFC_CONTROLLER_HALTED)
+ break;
+ udelay(1000);
+ }
+ }
+
+ /*
+ * Mask the interrupts and clear any
+ * pending interrupts left by BIOS/EFI
+ */
+
+ writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK));
+ writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK));
+
+ r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+ if (r32 == 1) {
+ writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT));
+ readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+ }
+ r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
+ if (r32 == 1) {
+ writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT));
+ readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
+ }
+
+ bfa_ioc_ct2_mac_reset(rb);
+ bfa_ioc_ct2_sclk_init(rb);
+ bfa_ioc_ct2_lclk_init(rb);
+
+ /*
+ * release soft reset on s_clk & l_clk
+ */
+ r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+ writel((r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET),
+ (rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+ /*
+ * Announce flash device presence, if flash was corrupted.
+ */
+ if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
+ r32 = readl((rb + PSS_GPIO_OUT_REG));
+ writel((r32 & ~1), (rb + PSS_GPIO_OUT_REG));
+ r32 = readl((rb + PSS_GPIO_OE_REG));
+ writel((r32 | 1), (rb + PSS_GPIO_OE_REG));
+ }
+
+ bfa_ioc_ct2_mem_init(rb);
+
+ writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC0_STATE_REG));
+ writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC1_STATE_REG));
+ return BFA_STATUS_OK;
+}
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists