[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <4E83D3B3.7090508@oracle.com>
Date: Thu, 29 Sep 2011 10:10:59 +0800
From: Joe Jin <joe.jin@...cle.com>
To: Matt Carlson <mcarlson@...adcom.com>,
Michael Chan <mchan@...adcom.com>
CC: Guru Anbalagane <guru.anbalagane@...cle.com>,
Gurudas Pai <gurudas.pai@...cle.com>,
Joe Jin <joe.jin@...cle.com>, netdev@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Greg Marsden <greg.marsden@...cle.com>
Subject: [PATCH] tg3: Dont dump registers if interface not ready.
When bootup the server with BCM5704 Gigabit Ethernet get below warning:
tg3 0000:03:01.0: eth0: DMA Status error. Resetting chip.
<Registers state of device>
tg3 0000:03:01.0: eth0: 0: Host status block [00000007:00000002:(0000:0000:0000):(0000:0000)]
tg3 0000:03:01.0: eth0: 0: NAPI info [00000001:00000002:(0000:0000:01ff):0000:(00c8:0000:0000:0000)]
tg3 0000:03:01.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:03:01.0: eth0: Flow control is on for TX and on for RX
tg3 0000:03:01.0: tg3_stop_block timed out, ofs=4800 enable_bit=2
tg3 0000:03:01.0: eth0: Link is down
tg3 0000:03:01.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:03:01.0: eth0: Flow control is on for TX and on for RX
If device not ready, then would not dump registers info.
Signed-off-by: Joe Jin <joe.jin@...cle.com>
Signed-off-by: Guru Anbalagane <guru.anbalagane@...cle.com>
Reported-by: Gurudas Pai <gurudas.pai@...cle.com>
Cc: Matt Carlson <mcarlson@...adcom.com>
Cc: Michael Chan <mchan@...adcom.com>
---
drivers/net/tg3.c | 11 +++++++++--
1 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 4a1374d..d79d344 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5475,10 +5475,15 @@ static void tg3_process_error(struct tg3 *tp)
{
u32 val;
bool real_error = false;
+ bool dump = true;
if (tg3_flag(tp, ERROR_PROCESSED))
return;
+ /* If interface not ready then dont dump error */
+ if (!netif_carrier_ok(tp->dev))
+ dump = false;
+
/* Check Flow Attention register */
val = tr32(HOSTCC_FLOW_ATTN);
if (val & ~HOSTCC_FLOW_ATTN_MBUF_LWM) {
@@ -5492,14 +5497,16 @@ static void tg3_process_error(struct tg3 *tp)
}
if (tr32(RDMAC_STATUS) || tr32(WDMAC_STATUS)) {
- netdev_err(tp->dev, "DMA Status error. Resetting chip.\n");
+ if (dump)
+ netdev_err(tp->dev, "DMA Status error. Resetting chip.\n");
real_error = true;
}
if (!real_error)
return;
- tg3_dump_state(tp);
+ if (dump)
+ tg3_dump_state(tp);
tg3_flag_set(tp, ERROR_PROCESSED);
schedule_work(&tp->reset_task);
--
1.7.6.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists